A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D,Suspended Sensor Array Patterning

Terahertz (THz) imaging is expected to become powerful tools for non-destructive inspections. To ensure the practical use of THz non-destructive monitoring, versatile THz imagers with adjustable designs that can eliminate the complexities and the bulkiness of the device are urgently required. Herein, a self-aligned filtration process for a 2D, free-standing carbon nanotube film array and its application to a THz video camera patch are reported. The presented techniques enable a) to freely design the camera size, sensor array pattern, and suspended shape according to its applications, b) to cut the camera patch into desired shapes, and c) to attach them to the objects that are intended to be measured. Real-time, non-destructive monitoring of various infrastructures is demonstrated. These results indicate that it can function regardless of restrictions, such as the shapes and locations of the measurement samples, thus providing a strong possibility for use in future non-destructive sensor networks.     

Abscopal Effect of Frozen Autograft Reconstruction Combined with an Immune Checkpoint Inhibitor Analyzed Using a Metastatic Bone Tumor Model

We evaluated the abscopal effect of re-implantation of liquid nitrogen-treated tumor-bearing bone grafts and the synergistic effect of anti-PD-1 (programmed death-1) therapy using a bone metastasis model, created by injecting MMT-060562 cells into the bilateral tibiae of 6–8-week-old female C3H mice. After 2 weeks, the lateral tumors were treated by excision, cryotreatment using liquid nitrogen, excision with anti-PD-1 treatment, and cryotreatment with anti-PD-1 treatment. Anti-mouse PD-1 4H2 was injected on days 1, 6, 12, and 18 post-treatment. The mice were euthanized after 3 weeks; the abscopal effect was evaluated by focusing on growth inhibition of the abscopal tumor. The re-implantation of frozen autografts significantly inhibited the growth of the remaining abscopal tumors. However, a more potent abscopal effect was observed in the anti-PD-1 antibody group. The number of CD8+ T cells infiltrating the abscopal tumor and tumor-specific interferon-γ (IFN-γ)-producing spleen cells increased in the liquid nitrogen-treated group compared with those in the excision group, with no significant difference. The number was significantly higher in the anti-PD-1 antibody-treated group than in the non-treated group. Overall, re-implantation of tumor-bearing frozen autograft has an abscopal effect on abscopal tumor growth, although re-implantation of liquid nitrogen-treated bone grafts did not induce a strong T-cell response or tumor-suppressive effect.     

Full Eulerian deformable solid-fluid interaction scheme based on building-cube method for large-scale parallel computing

We propose a full Eulerian incompressible solid-fluid interaction scheme capable of achieving high parallel efficiency and easily generating meshes for complex solid geometries. While good scalability of a full Eulerian solid-fluid interaction formulation has been reported by Sugiyama et al, their analysis was carried out using uniform Cartesian mesh and an artificial compressibility method. Typically, it is more challenging to achieve good scalability for hierarchical Cartesian meshes and a fully incompressible formulation. In addition, the conventional full Eulerian methods require a large computational cost to resolve complex solid geometries due to the usage of uniform Cartesian meshes. In an attempt to overcome the aforementioned issues, we employ the building-cube method, where the computational domain is divided into cubic regions called cubes. Each cube is divided at equal intervals, the same number of cubes is assigned to each core, and the spatial loop processing is executed for each cube. The numerical method is verified by computing five numerical examples. In the weak scaling test, the parallel efficiency at 32768 cores with 32 cores as a reference is 93.6%. In the strong scaling test, the parallel efficiency at 32768 cores with 128 cores as a reference is 70.2%.     

Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Effects of Smart Charging of Multiple Electric Vehicles in Reducing Power Generation Fuel Cost

The high penetration of variable sources of renewable power generation will lead to operational difficulties in supply/demand balancing in the entire power system. The mass deployment of electric vehicles (EVs) and plug‐in hybrid vehicles (PHEVs) will also cause significant changes in electricity demand. Therefore, controlling and managing the charging time of EVs/PHEVs are effective approaches that are imperative for improving balancing in power system operation. We assumed travel patterns for EVs in a model of the future Tokyo power system and analyzed the power system loads, including the charging load of the EVs, under several charging control scenarios. We verified that charging time controls are substantially effective for reducing the fuel costs in the power system. Further, we found that load leveling under a multicar charging management scenario gave the best results in terms of the fuel costs in all cases.     

Investigation of high-temperature chemical interaction of calcium silicate insulation and cesium hydroxide

ABSTRACT

The interaction of cesium hydroxide and a calcium silicate insulation material was experimentally investigated at high-temperature conditions to evaluate the possibility of unprecedented cesium retention under severe accident of boiling water reactor. The temperature where the interactions occurred and chemical species of cesium after the interaction were examined in this study. A thermogravimetry equipped with differential thermal analysis was used to analyze thermal events in the samples of mixed calcium silicate and cesium hydroxide under oxidizing and reducing atmospheric conditions with a maximum temperature of 1100°C. Before being mixed with cesium hydroxide, a part of calcium silicate was pretreated at high temperature to evaluate the effect of possible structural changes of this material due to a preceding thermal history and also for the sake of thermodynamic evaluation. It was found that for the original material, as xonotlite (Ca₆Si₆O₁₇(OH)₂) crystal, the endothermic reaction with cesium hydroxide occurred over the temperature range 575–730°C; meanwhile, for heat-treated material, which varied the crystal phase of original material to wollastonite (CaSiO₃), the interaction occurred over the temperature range 700–1100°C. The X-ray diffraction analyses have indicated that both types of calcium silicates regardless of the atmospheric conditions, cesium aluminum silicate, CsAlSiO₄, was formed with aluminum in the samples as an impurity or adduct. The insolubility of this formed cesium suggested the potency of cesium localization in the primary containment vessels on other structural materials that possess similar elements to that of calcium silicate insulation; hence, an effective decommissioning process could be developed.