Thermal analysis of polymer ignition

Gas phase criteria for the onset of flaming combustion of solids in fires are used to locate a critical temperature T_cr in a nonisothermal analysis (TA) experiment that corresponds to the surface temperature of the solid at ignition in a fire test, T_ign. This critical TA temperature occurs at low conversion of solid to gaseous fuel so it is independent of the heating rate in the test or the thermal decomposition reaction model. However, T_cr depends on the thermal properties of the polymer and the conditions of the fire test in which the gas phase criteria were measured. Nonisothermal analysis data in nitrogen and air were obtained for 20 polymers by thermogravimetric analysis and microscale combustion calorimetry. The critical temperatures T_crs obtained from TA experiments compared favorably with analytic results for a simple polymer ignition model and finite element simulations and were in qualitative agreement with ignition temperatures measured in standardized fire tests.     

Material properties and fire test results

Five material properties commonly used to describe the fire behavior of solids were evaluated as sole explanatory variables for four small‐scale fire tests with pass/fail outcomes by using a physically based probabilistic (phlogistic) burning model. The phlogistic model describes the likelihood of passing vertical Bunsen burner tests and a regulatory heat release rate test reasonably well over a wide range of material properties, as deduced from the correlation coefficient and mean deviation of the predicted and measured values. Of the thermal, combustion, and fire properties examined, the best predictors of the likelihood of passing the fire tests of this study were the heat of combustion of the sample, the heat release capacity, and the heat release parameter. The relative merits and drawbacks of qualitative (threshold) and quantitative (probabilistic) approaches to predicting fire test results using thermal and combustion properties are discussed. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Low-cost spectroscopy with a variable multivariate optical element

Here, successful realization of a variable multivariate optical element (VMOE) based on a transmissive liquid crystal (LC) panel is reported. In contrast to conventional multivariate optical elements (MOEs), a single VMOE is a dynamic system, allowing measurement of numerous analytes in different mixtures. Furthermore, VMOE has superior spectral resolution in comparison to a conventional MOE. It is demonstrated here that the system implemented in a Raman spectrometer predicts the concentration of each individual component in toluene-acetonitrile-cyclohexane mixtures with a prediction error of <6% (mass percentage). With a dedicated optical design of the setup, a prediction error smaller than 2% is expected to be feasible for the current chemical system.     

Hyaluronan/Diethylaminoethyl Chitosan Polyelectrolyte Complexes as Carriers for Improved Colistin Delivery

Improving the therapeutic characteristics of antibiotics is an effective strategy for controlling the growth of multidrug-resistant Gram-negative microorganisms. The purpose of this study was to develop a colistin (CT) delivery system based on hyaluronic acid (HA) and the water-soluble cationic chitosan derivative, diethylaminoethyl chitosan (DEAECS). The CT delivery system was a polyelectrolyte complex (PEC) obtained by interpolymeric interactions between the HA polyanion and the DEAECS polycation, with simultaneous inclusion of positively charged CT molecules into the resulting complex. The developed PEC had a hydrodynamic diameter of 210–250 nm and a negative surface charge (ζ-potential = −19 mV); the encapsulation and loading efficiencies were 100 and 16.7%, respectively. The developed CT delivery systems were characterized by modified release (30–40% and 85–90% of CT released in 15 and 60 min, respectively) compared to pure CT (100% CT released in 15 min). In vitro experiments showed that the encapsulation of CT in polysaccharide carriers did not reduce its antimicrobial activity, as the minimum inhibitory concentrations against Pseudomonas aeruginosa of both encapsulated CT and pure CT were 1 μg/mL.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.     

The effect of variation in polymer properties on the rate of burning

The sensitivity of the burning rate to variations in physical and chemical properties of synthetic polymers has been examined in order to understand the relative importance of the knowledge of these properties. The sensitivity analysis was performed using a numerical pyrolysis model called ThermaKin, which was employed to compute the rate of burning (expressed in terms of mass loss) of a one‐dimensional material object exposed to steady radiative heat. The results of the calculations indicate that the knowledge of decomposition reaction parameters (including the Arrhenius pre‐exponential factor, activation energy, heat, and char yield) is of key importance for prediction of the peak and average burning rates. Copyright © 2009 John Wiley & Sons, Ltd.     

Transnational mobilities: Western European architects and planners in the Soviet industrial cities, 1928–1933

During the first Five-Year Plan, the Soviet state relied on the expert knowledge of groups of German and other foreign workers (architects, planners, skilled labourers) to design and build the standardized housing projects for industrial cities. This paper outlines the complicated transfer of Western planning ideas and designs into actual built spaces, focusing on the gap between initial plans and the makeshift and provisional types of housing that were constructed in the Soviet industrial city of the early 1930s, amidst escalating attacks on functionalist architecture and constantly fluctuating attitudes toward foreign specialists.     

Synthesis and Characterization of Novel Succinyl Chitosan-Dexamethasone Conjugates for Potential Intravitreal Dexamethasone Delivery

The development of intravitreal glucocorticoid delivery systems is a current global challenge for the treatment of inflammatory diseases of the posterior segment of the eye. The main advantages of these systems are that they can overcome anatomical and physiological ophthalmic barriers and increase local bioavailability while prolonging and controlling drug release over several months to improve the safety and effectiveness of glucocorticoid therapy. One approach to the development of optimal delivery systems for intravitreal injections is the conjugation of low-molecular-weight drugs with natural polymers to prevent their rapid elimination and provide targeted and controlled release. This study focuses on the development of a procedure for a two-step synthesis of dexamethasone (DEX) conjugates based on the natural polysaccharide chitosan (CS). We first used carbodiimide chemistry to conjugate DEX to CS via a succinyl linker, and we then modified the obtained systems with succinic anhydride to impart a negative ζ-potential to the polymer particle surface. The resulting polysaccharide carriers had a degree of substitution with DEX moieties of 2–4%, a DEX content of 50–85 μg/mg, and a degree of succinylation of 64–68%. The size of the obtained particles was 400–1100 nm, and the ζ-potential was −30 to −33 mV. In vitro release studies at pH 7.4 showed slow hydrolysis of the amide and ester bonds in the synthesized systems, with a total release of 8–10% for both DEX and succinyl dexamethasone (SucDEX) after 1 month. The developed conjugates showed a significant anti-inflammatory effect in TNFα-induced and LPS-induced inflammation models, suppressing CD54 expression in THP-1 cells by 2- and 4-fold, respectively. Thus, these novel succinyl chitosan-dexamethasone (SucCS-DEX) conjugates are promising ophthalmic carriers for intravitreal delivery.     

Effect of Chloride‐Based Accelerator in the Presence of Water‐Reducing and Retarding Admixture on Autogenous Shrinkage

Rapid repair concrete mixtures commonly used for full‐depth concrete pavement repair sections can use large dosages of accelerating admixtures to increase strength gain rates and decrease the time to traffic opening. Most often, these mixtures also contain water‐reducing and retarding admixtures (WRRAs) to allow for the use of a low water–cementitious material ratio in order to meet strength requirements. The use of large dosages of accelerating admixtures in combination with retarding admixtures could have significant side effects on concrete. Autogenous shrinkage of low water–cementitious concrete can contribute to high tensile stresses and cracking problems. The effect of calcium chloride‐based accelerating admixture dosage, when used with WRRAs, on autogenous shrinkage was measured. It was found that the inclusion of calcium chloride‐containing accelerating admixtures has a nonlinear effect on the pore size distribution and consequently a nonlinear increase on the autogenous shrinkage.     

Survival of probiotics in pea protein-alginate microcapsules with or without chitosan coating during storage and in a simulated gastrointestinal environment

Food Science and Biotechnology - Pea protein-alginate microcapsules with or without a chitosan coating and containing Lactobacillus rhamnosus R0011 and L. helveticus R0052 were produced by...