Development of a difunctional oxirane and multifunctional acrylate interpenetrating polymer network composite system with antimicrobial properties

This research continued the development of a difunctional Oxirane and multifunctional Acrylate interpenetrating polymer network composite System (OASys) with antimicrobial properties. The effects of 4-Isopropyl-4′-methyldiphenyliodonium tetrakis (pentafluorophenyl) borate (Borate), hexamethylene diamine (HMDA) and N,N-dimethyl p-toluidine (DMPT) on OASys (Epalloy 5001:dipentaerythritol hexaacrylate) composite hardness, contact angle, monomer-to-polymer degree of conversion (DoC), mechanical properties, polymerization shrinkage, shrinkage stress, and antimicrobial properties were determined. Bis-GMA:TEGDMA composites were used as the control. OASys composites with 9 wt% Borate and 0.5 wt% DMPT or 1.5 wt% HMDA had comparable hardness, DoC's and polymerization shrinkages to controls, but had lower contact angles and mechanical properties. Additionally, OASys composites with 1.5 wt% HMDA had significantly less polymerization stress than controls and demonstrated significant antibacterial activity against Streptococcus mutans and Lactobacillus casei out to 3 months. With lower shrinkage stress and long-term antimicrobial activity, OASys composites look promising for increasing the clinical lifetime of dental composites, but improvements in mechanical properties are needed.     

Graphical Methodology to Study the Corona Onset Voltage for Electrostatic Precipitation of Nanoparticles

Theoretical Foundations of Chemical Engineering - The corona onset voltage is an important operating parameter in the electrostatic precipitation of nanoparticulate, however, its experimental...     

Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.     

Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Genetic Deficiency and Pharmacological Stabilization of Mast Cells Ameliorate Pressure Overload-Induced Maladaptive Right Ventricular Remodeling in Mice

Although the response of the right ventricle (RV) to the increased afterload is an important determinant of the patient outcome, very little is known about the underlying mechanisms. Mast cells have been implicated in the pathogenesis of left ventricular maladaptive remodeling and failure. However, the role of mast cells in RV remodeling remains unexplored. We subjected mast cell-deficient WBB6F1-KitW/W-v (Kit^W/Kit^W-v) mice and their mast cell-sufficient littermate controls (MC^+/+) to pulmonary artery banding (PAB). PAB led to RV dilatation, extensive myocardial fibrosis, and RV dysfunction in MC^+/+ mice. In PAB Kit^W/Kit^W-v mice, RV remodeling was characterized by minimal RV chamber dilatation and preserved RV function. We further administered to C57Bl/6J mice either placebo or cromolyn treatment starting from day 1 or 7 days after PAB surgery to test whether mast cells stabilizing drugs can prevent or reverse maladaptive RV remodeling. Both preventive and therapeutic cromolyn applications significantly attenuated RV dilatation and improved RV function. Our study establishes a previously undescribed role of mast cells in pressure overload-induced adverse RV remodeling. Mast cells may thus represent an interesting target for the development of a new therapeutic approach directed specifically at the heart.     

Kinetics of Soybean Oil Hydrolysis on Niobium Catalysts

The catalytic hydrolysis of soybean oil was used as an alternative for the production of monoglycerides (MG) and diglycerides (DG). The reactions were conducted in a stainless-steel tubular reactor in the temperature range of 240–290 °C, on niobium phosphate (NBP) and niobium oxide (NBO) as catalysts. In the hydrolysis reactions at 270 °C, the maximum selectivities of the products of interest were obtained at 22 % MG and 48 % DG for the reaction with NBP, and 7 % MG and 33 % DG with NBO, for 59 % and 36 % of triglyceride conversion in 10 min, respectively. The proposed kinetic model presented a good fit of the theoretical model with the experimental data, showing that the previous hypotheses considered for the mechanism development are suitable for describing the kinetics of soybean oil hydrolysis.     

Seeing is believing? When scanning electron microscopy (SEM) meets clinical dentistry: The replica technique.

In restorative dentistry, the in situ replication of intra‐oral situations, is based on a non‐invasive and non‐destructive scanning electron microscopy (SEM) evaluation method. The technique is suitable for investigation restorative materials and dental hard‐ and soft‐tissues, and its interfaces. Surface characteristics, integrity of interfaces (margins), or fracture analysis (chipping, cracks, etc.) with reliable resolution and under high magnification (from ×50 to ×5,000). Overall the current study aims to share detailed and reproducible information about the replica technique. Specific goals are: (a) to describe detailed each step involved in producing a replica of an intra‐oral situation, (b) to validate an integrated workflow based on a rational sequence from visual examination, to macrophotography and SEM analysis using the replica technique; (c) to present three clinical cases documented using the technique. A compilation of three clinical situations/cases were analyzed here by means the replica technique showing a wide range of possibilities that can be reached and explored with the described technique. This guidance document will contribute to a more accurate use of the replica technique and help researchers and clinicians to understand and identify issues related to restorative procedures under high magnification.     

Antioxidant and antimicrobial potential of cajazeira leaves (Spondias mombin) extracts

Cajazeira leaves (Spondias mombin) have their highlighted use as antioxidant and natural antimicrobial, which justifies the objective of this work to evaluate the biological activities of different extracts. In order to evaluate the antioxidant and antimicrobial potentials of the cajazeira leaves, extractions at low pressure and high pressure were performed. The low pressure extractions (PLE) were carried out using Soxhlet (SOX) and tip ultrasound, using different solvents. Supercritical fluid extraction (SFE) was evaluated at temperature of 40?60°C and pressure of 150?300 bar besides extraction with cosolvent. Higher yields were obtained with the use of more polar solvents at LPE. The extracts obtained by SOX with ethanol and others polar solvents presented the best TPC values and antioxidant activity. The extracts at LPE with hexane and ethyl acetate and SFE presented better antimicrobial activity. Through liquid chromatography of high efficiency, it was possible to identify compounds with recognized biological activity, like ellagic acid, gallic acid and catechin.     

Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures

Direct laser writing techniques are suitable for the high precision-patterning of 2D and 3D micro/nanostructures, featuring a variety of geometries and materials. Here, we demonstrated the use of laser-induced forward transfer with fs-pulses (fs-LIFT) to selectively transfer graphene oxide and poly(p-phenylene vinylene) patterns onto polymeric microstructures, fabricated by two-photon polymerization. The influence of different fs-LIFT experimental parameters on the width and height of the printed patterns was investigated. Upon optimum fs-LIFT parameters, we achieved homogeneous printed areas of both materials onto specific regions of the microstructures. Raman spectroscopy confirmed that fs-LIFT does not change the donor material upon transfer. Overall, this work demonstrates a promising strategy with precise printing capabilities, thus opening new opportunities for the development of photonic and optoelectronic devices.