Fourier Analysis of Serial Dependence Measures

Classical spectral analysis is based on the discrete Fourier transform of the autocovariances. In this article we investigate the asymptotic properties of new frequency‐domain methods where the autocovariances in the spectral density are replaced by alternative dependence measures that can be estimated by U‐statistics. An interesting example is given by Kendall's τ, for which the limiting variance exhibits a surprising behavior.     

A methodology for predicting and comparing the full‐scale fire performance of similar materials based on small‐scale testing

Reconstructive fire testing is an important tool used by fire investigators to determine the cause, origin, and progression of a particular fire. Accurate reconstruction of the fire requires the laboratory structure to be outfitted with materials that, in terms of contribution to fire growth, perform similarly to the original materials found at the fire scene. Therefore, a procedure was developed to enable fire investigators to select these replacement materials on the basis of a quantitative assessment of their relative fire performance. This procedure consists of gram‐scale and/or milligram‐scale standard testing accompanied by inverse numerical modeling of these tests, which is used to obtain relevant material properties. A numerical model composed of a detailed pyrolysis submodel and empirical flame heat feedback submodels, which were developed in this study, is subsequently employed to simulate the early stages of the Room Corner Test, which was selected to represent full‐scale material performance. The results of these simulations demonstrate that this procedure can successfully differentiate between fire growth propensities of several commercially available medium density fiberboards.     

Inorganic Protection of Polymer Nanocapsules: A Strategy to Improve the Efficiency of Encapsulated Optically Active Molecules

We demonstrate that the efficiency under ambient conditions of optically active molecules encapsulated in polymer nanocapsules can be significantly improved by depositing an inorganic layer onto the polymeric shell. A triplet-triplet annihilation upconversion (TTA-UC) system consisting of a porphyrin derivative and perylene is used as a representative case. Different inorganic materials are deposited on the surface of functionalized polymer nanocapsules synthesized by free-radical polymerization in miniemulsion. First, a silicate clay with formula [Si₈(Mg_5.45Li_0.4)O₂₀(OH)₄]Na_0.7 is deposited on the surface of positively charged polystyrene nanocapsules via layer-by-layer deposition. Second, controlled in situ mineralization of hydroxyapatite and cerium(IV) oxide are carried out on the surface of negatively charged polystyrene nanocapsules. In both cases the inorganic materials on the nanocapsule surface act as a scavenger and avoid the entry of oxygen from the external environment. By avoiding the entry of oxygen, the photo-oxidation process of perylene molecules is avoided within the system, and an increase in the TTA-UC properties occurs.     

The Effect of Non-Thermal Plasma on the Structural and Functional Characteristics of Human Spermatozoa

Significant antibacterial properties of non-thermal plasma (NTP) have converted this technology into a promising alternative to the widespread use of antibiotics in assisted reproduction. As substantial data available on the specific in vitro effects of NTP on male reproductive cells are currently missing, this study was designed to investigate selected quality parameters of human spermatozoa (n = 51) exposed to diffuse coplanar surface barrier discharge NTP for 0 s, 15 s, 30 s, 60 s and 90 s. Sperm motility characteristics, membrane integrity, mitochondrial activity, production of reactive oxygen species (ROS), DNA fragmentation and lipid peroxidation (LPO) were investigated immediately following exposure to NTP and 2 h post-NTP treatment. Exposure to NTP with a power input of 40 W for 15 s or 30 s was found to have no negative effects on the sperm structure or function. However, a prolonged NTP treatment impaired all the sperm quality markers in a time- and dose-dependent manner. The most likely mechanism of action of high NTP doses may be connected to ROS overproduction, leading to plasma membrane destabilization, LPO, mitochondrial failure and a subsequent loss of motility as well as DNA integrity. As such, our findings indicate that appropriate plasma exposure conditions need to be carefully selected in order to preserve the sperm vitality, should NTP be used in the practical management of bacteriospermia in the future.     

Acoustically Enhanced Water Mist Suppression of Heptane Fueled Flames

Recent research has shown that acoustics can be used to suppress flames from a liquid fuel source. The results of these experiments indicated that acoustics alone are insufficient to control flames beyond the incipient stage. Recent research has also shown that variations in the delivery of water mist to a fire can enhance the mist’s efficiency. Therefore, the addition of acoustics to water mist may be an effective means of enhancing an established fire protection technology. For the first time, acoustics and water mist have been combined and studied as a flame suppression strategy. A series of experiments were conducted that explored the potential for coupling acoustics with water mist as means of flame suppression. Heptane fueled flames were created from two different sized ceramic fiber wicks: 30 mm?×?50 mm with 5 mL of fuel, and 60 mm?×?100 mm with 20 mL of fuel. The flames were then exposed to water mist delivered at a constant rate, which was found to be incapable of suppressing the flames. Next, low frequency sound waves at 62 Hz and 80 Hz were used to suppress flames from both wicks, with each frequency being generated by a different resonator. Finally, acoustics from both resonators were combined with water mist, and used to suppress flames from both wicks. The results showed that a combination of acoustic waves and water mist suppressed the flames more effectively than each individual technique on its own. This finding opens the possibility of developing more efficient ways to use water mist technology.     

Preparation of polymeric nanocapsules via nano-sized poly(methoxydiethyleneglycol methacrylate) colloidal templates

Polymeric nanocapsules are attractive devices with a number of potential applications. In the present contribution we describe a method for nanocapsule preparation which is based on the formation of nanosized templates (mesoglobules, prepared from thermo-responsive poly(methoxydiethyleneglycol methacrylate)s, PDEGMA). These mesoglobules were coated with a cross-linked shell formed by pseudo-seeded radical polymerization of either N-isopropylacrylamide or 2-hydroxyethylmethacrylate in the presence of a cross-linking agent. Dissolution and removal of templates were achieved by extensive dialysis against water at temperatures below the LCST of PDEGMA. The obtained nanocapsules were visualized by transmission electron microscopy and their dimensions were determined by dynamic light scattering. The differences in the morphology of the nanocapsules were attributed to the different structures of the cross-linked membranes.     

The Effect of La2O3 Addition on Sol–Gel Derived Mullitization

Monophasic gel with stoichiometric 3Al₂O₃·2SiO₂ composition and gels with 0.99, 1.96, and 2.91 mol% La₂O₃ added were sol–gel derived. The crystallization path, structure evolution, microstructure, and morphology of calcined premullite powders and sintered ceramic bodies have been investigated as a function of La₂O₃ content and sintering temperature. In addition to mullite, spinel phase at about 980°C, and α‐alumina at above 1000°C were determined; however, neither La₂O₃ nor La‐related compounds had crystallized. The La₂O₃ predominately incorporated into the glassy phase, enhanced with La₂O₃ level, which affected both mullite structure and composition, as confirmed by electron microscopy, Rietveld structure refinement, determination of unit cell parameters, electron microscopy, and achieved density of the sintered bodies. Increased thermal treatment changes the alumina/silica ratio in mullite (towards 3:2 below 1200°C, and toward 2:1 above), and decreases the mullite/amorphous ratio. Sintered dense ceramic bodies revealed a positive densification effect and increased sinterability as a result of the lanthanum‐induced increase in glassy phase.     

Material properties and fire test results

Five material properties commonly used to describe the fire behavior of solids were evaluated as sole explanatory variables for four small‐scale fire tests with pass/fail outcomes by using a physically based probabilistic (phlogistic) burning model. The phlogistic model describes the likelihood of passing vertical Bunsen burner tests and a regulatory heat release rate test reasonably well over a wide range of material properties, as deduced from the correlation coefficient and mean deviation of the predicted and measured values. Of the thermal, combustion, and fire properties examined, the best predictors of the likelihood of passing the fire tests of this study were the heat of combustion of the sample, the heat release capacity, and the heat release parameter. The relative merits and drawbacks of qualitative (threshold) and quantitative (probabilistic) approaches to predicting fire test results using thermal and combustion properties are discussed. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Structure and Properties of High-Temperature Multilayer Hybrid Material Based on Vanadium Alloy and Stainless Steel

The present work is devoted to the development of new structural composite material having the unique complex of properties for operating in ultrahard conditions that combine high temperatures, radiation, and aggressive environments. A new three-layer composite tube material based on vanadium alloy (V-4Ti-4Cr) protected by stainless steel (Fe-0.2C-13Cr) has been obtained by co-extrusion. Mechanism and kinetics of formation as well as structure, composition, and mechanical properties of “transition” area between vanadium alloy and stainless steel have been studied. The transition area (13- to 22-µm thick) of the diffusion interaction between vanadium alloy and steel was formed after co-extrusion. The microstructure in the transition area was rather complicated comprising different grain sizes in components, but having no defects or brittle phases. Tensile strength of the composite was an average 493 ± 22 MPa, and the elongation was 26 ± 3 pct. Annealing at 1073 K (800 °C) increased the thickness of transition area up to 1.2 times, homogenized microstructure, and slightly changed mechanical properties. Annealing at 1273 K (1000 °C) further increased the thickness of transition area and also lead to intensive grain growth in steel and sometimes to separation between composite components during tensile tests. Annealing at 1073 K (800 °C) is proposed as appropriate heat treatment after co-extrusion of composite providing balance between diffusion interaction thickness and microstructure and monolithic-like behavior of composite during tensile tests.

     

Comparison of a district heating system operation based on actual data – Omsk city,Russia, case study*

A district heating (DH) system in the Russian city of Omsk has been considered as a case study. This study is based on the data set of temperature and demand recorded over two-year operation of the DH system. We provide an insight on how the heat demand profile is met by the control framework. The paper quantifies the DH system performance by using heat load curves, maximum, minimum and average values of temperature, paving the way for a modelling approach. Central heating process in Omsk in 2017 was generally smoother than in 2016, while peak values are also lower. In 2017, its supply temperature was about 5°C closer to the control curve. The dispersion of the points was reduced between 2016 and 2017, especially at higher outdoor temperatures. Further lowering annual and peak heat demand, which are respectively 4% and 9% lower in 2017 should be a priority in future.