Blind Decoding of Massive MIMO Uplink Systems Based on the Higher Order Cumulants

In a developing country like India, there is an exponential rise in population nutrition requirement. To meet up with both the ends, the agricultural techniques should be perfected for optimal yield and quality. Irrigation and soil property monitoring system using sensors can be automated and operated wirelessly to achieve optimal water supply control and surveillance. The objective of this paper, is to automate the whole wireless sensor network (WSN) system with a control over water pumps and dripper valves. The humidity, temperature and pH sensor’s percepts provide a feedback, to control the water content of the soil. The system has an low-cost and energy reliable ZigBee for sensor data transformation, high-range GPRS system for data storing and analysis, and the whole system is powered by Solar panels which makes it self-sustainable. Customizable options for different crop with different requirements make it a versatile WSN system for automated irrigation based water management.     

Analysis of the flow field,thermal performance,and heat transfer augmentation in circular tube using different dimple geometrical configurations with internal twisted-tape insert

In this study, a numerical investigation for the fluid flow field analysis using different configuration dimple parameters in conjunction with an internal type insert in pipe is carried out. The effects of the dimple diameters with a center twisted tape on the flow pattern, pressure drop, friction factor, and heat transfer characteristics are investigated. The influence of the latter device on heat performance and thermal-hydraulic performance evaluation factor (PEF) were carried out in a pipe for fully developed flow with range for fully developed flow with range of Reynolds number (Re) of 1573 and 23 592. Experiments with numerical models are performed using different dimpled dimeters by inserting twisted tapes. The outcomes observe that the qualitative analysis for flow fields such as static pressure, dynamic pressure, velocity magnitude, wall shear stress, and turbulent kinetic energy as well as the quantities analysis for pressure drop, heat transfer coefficient friction factor, and Nu number in dimpled pipe fitted with twisted tape are greater than plain pipe. This is because using these devices cause more secondary flow, swirl flow, and flow mixing that lead to higher turbulence, which, in turn, enhance the overall heat transfer. The results indicated that the lower and higher values of thermal PEF are about 0.78 and 1.6, respectively, at the dimple dimmers of 1 mm.     

Epithelial Layer Estimation Using Curvatures and Textural Features for Dysplastic Tissue Detection

Boundary effect in digital pathology is a phenomenon where the tissue shapes of biopsy samples get distorted during the sampling process. The morphological pattern of an epithelial layer is greatly affected. Theoretically, the shape deformation model can normalise the distortions, but it needs a 2D image. Curvatures theory, on the other hand, is not yet tested on digital pathology images. Therefore, this work proposed a curvature detection to reduce the boundary effects and estimates the epithelial layer. The boundary effect on the tissue surfaces is normalised using the frequency of a curve deviates from being a straight line. The epithelial layer’s depth is estimated from the tissue edges and the connected nucleolus only. Then, the textural and spatial features along the estimated layer are used for dysplastic tissue detection. The proposed method achieved better performance compared to the whole tissue regions in terms of detecting dysplastic tissue. The result shows a leap of kappa points from fair to a substantial agreement with the expert’s ground truth classification. The improved results demonstrate that curvatures have been effective in reducing the boundary effects on the epithelial layer of tissue. Thus, quantifying and classifying the morphological patterns for dysplasia can be automated. The textural and spatial features on the detected epithelial layer can capture the changes in tissue.     

Synthesis of a Potential Tumor Imaging Agent by Oxidative Radioiodination of Aspirin and Its Preclinical Study

Radiochemistry - Aspirin, one of nonsteroidal anti-inflammatory analgesic drugs, was labeled with 125I with a labeling yield of 85.5% under the following conditions: pH 9, 100 mg of the substrate,...     

Adsorptive Removal of Manganese Ions from Polluted Aqueous Media by Glauconite Clay-Functionalized Chitosan Nanocomposites

The presence of Mn(II) in water exceeding the permitted concentration limits declared by the World Health Organization (WHO) influences individuals, animals, and the ecosystem negatively. Therefore, there is a necessity for an efficient material to eliminate this potentially toxic element from wastewater. We herein focused on the adsorptive removal of Mn(II) ions from polluted aqueous media using natural Egyptian glauconite clay (G) and its nanocomposites with modified chitosan (CS). We applied modified chitosan with glutaraldehyde (GL), ethylenediaminetetraacetic acid (EDTA), sodium dodecyl sulfate (SDS), and cetyltrimethyl ammonium bromide (CTAB). The utilized nanocomposites were referred to as GL-CS/G, EDTA-GL-CS/G, SDS-CS/G, and CTAB-CS/G, respectively. The point of zero charge values of the materials were estimated. The adsorption properties of the G clay and its nanocomposites toward the removal of Mn(II) ions from polluted aqueous media as well as the adsorption mechanism were explored using a batch technique. The glauconite (G) and its nanocomposites: GL-CS/G, CTAB-CS/G, EDTA-GL-CS/G, and SDS-CS/G, exhibited maximum adsorption capacity values of 3.60, 24.0, 26.0, 27.0, and 27.9 mg g^?1, respectively. The adsorption results fitted well the Langmuir isotherm and pseudo-second-order kinetic models. The estimated thermodynamic parameters: ΔH° (from 1.03 to 5.55 kJ/mol) and ΔG° (from ? 14.5 to ? 18.8 kJ/mol), indicated that Mn(II) ion adsorption process was endothermic, spontaneous, and physisorption controlled. Furthermore, the obtained adsorption results are encouraging and revealing a great potentiality for using the modified adsorbents as accessible adsorbents for Mn(II) ion removal from polluted aqueous solutions, depending on their reusability, high stability, and good adsorption capacities.

Graphic Abstract

     

Phase Transformations of α-Alumina Made from Waste Aluminum via a Precipitation Technique

We report on a recycling project in which α-Al₂O₃ was produced from aluminum cans because no such work has been reported in literature. Heated aluminum cans were mixed with 8.0 M of H₂SO₄ solution to form an Al₂(SO₄)₃ solution. The Al₂(SO₄)₃ salt was contained in a white semi-liquid solution with excess H₂SO₄; some unreacted aluminum pieces were also present. The solution was filtered and mixed with ethanol in a ratio of 2:3, to form a white solid of Al₂(SO₄)₃·18H₂O. The Al₂(SO₄)₃·18H₂O was calcined in an electrical furnace for 3 h at temperatures of 400–1400 °C. The heating and cooling rates were 10 °C/min. XRD was used to investigate the phase changes at different temperatures and XRF was used to determine the elemental composition in the alumina produced. A series of different alumina compositions, made by repeated dehydration and desulfonation of the Al₂(SO₄)₃·18H₂O, is reported. All transitional alumina phases produced at low temperatures were converted to α-Al₂O₃ at high temperatures. The X-ray diffraction results indicated that the α-Al₂O₃ phase was realized when the calcination temperature was at 1200 °C or higher.     

Impact of “terminal effect” on Cu electrochemical deposition: Filling capability for different metallization options

The 300 mm wafer copper electrochemical deposition (ECD) process for dual damascene metallization of semiconductor advanced interconnects is critically reviewed and the breakthroughs that enable further scaling of this process are examined. Special emphasis is placed on analyzing the critical issues, such as barrier/seed options, terminal effect and future plating prospects for this technology. The smallest plateable feature size values are estimated for different metallization integration schemes, such as conventional Physical Vapor Deposited (PVD) TaN/Ta/Cu, hybrid RuTa/Cu, CuMn (8%) self-forming barrier/seed, and Plasma-Enhanced Atomic Layer Deposition (PEALD) Ru, limiting the allowed maximum sheet resistance to 14 Ohms/sq for the Cu-based seeds and the effective maximum filling aspect ratio to 5-6.     

Coexistence of OFDM‐Based IMT‐Advanced and FM Broadcasting Systems

Coexistence analysis is extremely important in examining the possibility for spectrum sharing between orthogonal frequency‐division multiplexing (OFDM)‐based international mobile telecommunications (IMT)‐Advanced and other wireless services. In this letter, a new closed form method is derived based on power spectral density analysis in order to analyze the coexistence of OFDM‐based IMT‐Advanced systems and broadcasting frequency modulation (FM) systems. The proposed method evaluates more exact interference power of IMT‐Advanced systems in FM broadcasting systems than the advanced minimum coupling loss (A‐MCL) method. Numerical results show that the interference power is 1.3 dB and 3 dB less than that obtained using the A‐MCL method at cochannel and adjacent channel, respectively. This reduces the minimum separation distance between the two systems, which eventually saves spectrum resources.