Odor Perception in the Cotton Bollworm,Helicoverpa armigera,Exposed to Juglans regia,a Marginal Host Plant

Journal of Chemical Ecology - The cotton bollworm, Helicoverpa armigera, is one of the most destructive agricultural pests in the world, infesting cotton, maize, soybean, and many other crops. In...     

Cross-Layer Optimization of Dynamic Packet Assignment for Video Transmission Over IEEE 802.11e Networks

Video transmission over IEEE 802.11e wireless networks still shows poor performance for large bandwidth demand and frequently changed environments. Thus, several enhancements of IEEE 802.11e were proposed. On the other hand, big frames and simultaneous sending of adjacent frames always cause packet dropping for buffer overflow. In the past, we proposed an IEEE 802.11e enhancement named DFAA and a content aware mechanism to solve the above problems. The motivation of this paper is to find a proper way to integrate these two mechanisms. A DFAA enhancement (DFAA-E) is proposed to make up the insufficiency of content aware mechanism. Experiments results show that the combination of DFAA-E and content aware mechanism improves the video decoded quality greatly. And its performance can be further enhanced by selecting the suitable settings of certain parameters.     

A universal HF-free synthetic method to highly efficient narrow-band red-emitting A2XF6:Mn4+ (A = K,Na, Rb,Cs; X = Si,Ge, Ti) phosphors

Mn⁴⁺-activated fluoride red-emitting narrow-band phosphors have been successfully used in wide color-gamut white LEDs for liquid crystal display (LCD) backlights. However, highly concentrated and toxic HF is usually used in their synthesis, causing environment and safety issues. In this work, we proposed a HF-free green method, that is, using NH₄F/HCl instead of HF, to synthesize a series of A₂XF₆:Mn⁴⁺ (A = K, Na, Rb, Cs; X = Si, Ge, Ti) phosphors. The microstructure, photoluminescence (PL) properties, thermal quenching, and applications of the synthesized phosphors were investigated. Using the proposed approach, the phosphors generally showed a pure phase, a particle size ranging from 5 to 45 μm, and some characteristic sharp emission lines of Mn⁴⁺ in the red spectral range. The internal quantum efficiency was varied in a broad range of 69%-94% under the 460 nm excitation, depending on the composition of the fluoride host. Among these compositions, K₂XF₆:Mn⁴⁺ (X = Ge and Ti) phosphors even had a similar external quantum efficiency (>60%) with commercial ones. By combining K₂GeF₆:Mn⁴⁺ (narrow-band red) and β-sialon:Eu²⁺ (narrow-band green) with a blue LED, a white light-emitting diode (wLED) backlight with a color gamut of 87.7% National Television System Committee Standard, color temperature of 8423 K, and a luminous efficacy of 110.8 lm/W was demonstrated. These results indicate that the synthetic method proposed in this work is universal for preparing highly efficient fluoride phosphors used in wLEDs.     

Effect of surcharge loading rate and mobilized load ratio on the performance of vacuum–surcharge preloading with PVDs

The results from three laboratory model tests performed under various vacuum and surcharge loads with PVDs are reported. Different SLRs were adopted to investigate the effect on the consolidation of dredged soil. To measure the lateral displacement, a refitted inclinometer was developed and tested. In the tests, the settlement, lateral displacement, and vane shear strength were measured, and the degree of consolidation (DOC), horizontal coefficient of consolidation (C_h), and bearing capacity were calculated. The results indicate that larger SLR values promote consolidation. The largest vane shear strength, settlement, and C_h values were all obtained under the highest SLR, and the bearing capacity under this SLR was more than double that under the lowest SLR. The DOC was found to increase with the growth of the SLR. However, considering the vacuum pressure was higher in Case-III, the influence of SLR on reinforcement effect may not be so significant.     

高密度聚乙烯/丁苯橡胶热塑性硫化胶的形状记忆性能

采用动态硫化法制备了高密度聚乙烯(HDPE)/丁苯橡胶(SBR)热塑性硫化胶(TPV),研究了橡塑比、定型温度、回复温度及增容剂苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)对HDPE/SBR TPV形状记忆性能的影响,观察了其微观结构,提出了形状记忆行为机制。结果表明,HDPE/SBR TPV具有典型的"海-岛"结构,拉伸后其表面存在明显的取向结构;SBS能显著提高HDPE/SBR TPV的形状记忆性能,当SBS用量为6份、定型温度和回复温度均为120℃时,HDPE/SBR TPV的形状记忆性能最佳。     

餐饮废油生物柴油低温流动性的改进研究

使用气-质联用仪测定餐饮废油生物柴油(WCME)和-10号柴油(-10PD)的组成,使用冷滤点试验器和运动黏度试验器测定WCME的低温流动性,同时使用调合、添加低温流动性改进剂的方法改进WCME的低温流动性。实验结果表明,WCME主要由饱和脂肪酸甲酯和不饱和脂肪酸甲酯组成,质量分数分别为27.63%和71.81%;WCME冷滤点为0℃,运动黏度(40℃)为4.41mm2/s;WCME与-10PD调合后,冷滤点降低,其中B20的冷滤点最低,为-13℃,运动黏度随着WCME的体积分数的减少,逐渐接近-10PD的运动黏度。通过添加低温流动性改进剂,WCME,B10,B20的冷滤点分别从0,-8,-13℃降至-4,-26,-25℃。