Resource Search Method of Mobile Intelligent Education System Based on Distributed Hash Table

Mobile Networks and Applications - In order to realize the best matching search of mobile intelligent education system resources, a resource search method of mobile intelligent education system...     

火麻仁油微乳凝胶面膜的制备及初步评价

目的:制备火麻仁油微乳凝胶补水面膜并对其理化性质、保湿性和抗氧化活性进行评价.方法:通过伪三元相图确定火麻仁油微乳最佳处方,采用单因素及正交试验优化火麻仁油微乳凝胶处方,载入保湿活性物质制得火麻仁油微乳凝胶面膜并对其质量、稳定性、保湿性和抗氧化活性进行评价.结果:火麻仁油微乳最佳处方:火麻仁油0.2％、PEG-20氢化蓖麻油0.53％、1,3丙二醇0.27％.火麻仁油微乳凝胶最佳处方为卡波姆-940含量1％,丙三醇含量5％,稀释倍数30倍.制得的微乳凝胶澄清透明、涂展性较好、易清洗、不油腻;平均粒径为(30.91±0.31)nm,PDI为0.299±0.017,电位为(-3.54±0.43)mV;黏度为494725.15 mPa·s;pH值为5.50±0.01;保湿效果优于市售某凝胶面膜;火麻仁油微乳凝胶面膜对DPPH自由基清除率高于火麻仁油毛油,质量浓度为6 mg·mL-1时可达62.39％,IC50为3.71 mg·mL-1.结论:火麻仁油微乳凝胶面膜安全、稳定,制备工艺简单,对皮肤具有良好的补水和抗氧化效果,具备开发和推广的价值.     

Surface Modification of Co3O4 Nanosheets to Promote Peroxymonosulfate Activation for Degradation of Atrazine

Catalysis Letters - This study proposed a new facile route to rational creating oxygen-vacancy (Vo)-rich surface of Co3O4 nanosheets by acetic acid leaching. The acid leached Co3O4 nanosheets was...     

Software Optimization in Ultrasound Imaging Technique Using Improved Deep Belief Learning Network on the Internet of Medical Things Platform

Wireless Personal Communications - The Internet of Medical Things (IoMT) is the array of medical instruments and related technologies that link Information Technology (IT) systems in...     

A hybrid damage model for simulating adiabatic shear bands

International Journal of Fracture - Adiabatic shear band (ASB) is one of the most important failure modes under high strain-rate deformation. In this work, we propose a hybrid damage model to...     

How scientific research incorporates policy: an examination using the case of China’s science and technology evaluation system

Scientometrics - Governments typically formulate sets of policies to guide the direction of scientific research. And the possible effects of these policies on scientific research have been...     

Fabrication of high-efficiency Yb:Y2O3 laser ceramics without photodarkening

High-efficiency Yb:Y₂O₃ laser ceramics were fabricated using the vacuum-sintering plus hot isostatic pressing (HIP) without sintering additives. High-purity well-dispersed nanocrystalline Yb:Y₂O₃ powder was synthesized using a modified co-precipitation method in-house. The green bodies were first vacuum sintered at a temperature as low as 1430°C and then HIPed at 1450°C. Finally, the samples were air annealed at 800°C for 10 h. Although no sintering aids were used, full density of the samples with excellent optical homogeneity and an inline transmission of 80% at 400 nm could be obtained. Moreover, photodarkening phenomenon was not detected in the ceramics. Preliminary laser experiment with the fabricated ceramics in a two-mirror cavity has demonstrated 32 W continuous-wave (CW) output at ∼1077 nm with an optical-to-optical conversion efficiency of 58.2%. To the best of our knowledge, this is so far the highest CW output power and optical-to-optical conversion efficiency achieved with the Yb³⁺-doped sesquioxide ceramics in a simple two-mirror cavity.     

GC-MS法测定缬草残渣中的化学组分

分别使用95％乙醇和四氯化碳作为提取溶剂,在78℃左右,对已提取过挥发油的缬草残渣中化学成分进行提取,借用气相色谱-质谱联用方法(GC-MS)对提取浸膏中化学组分进行分析.结果显示:以乙醇作为提取溶剂条件下,共鉴定出38中化学组分,数据出峰相对总质量分数为81.7％;以四氯化碳为提取溶剂条件下,共鉴定出44种化学组分,数据出峰相对总质量分数为84.4％.