Low velocity impact resistance of ceramic/polyurea composite plates: experimental study

Journal of Mechanical Science and Technology - Laminated and segmented ceramic/polyurea composite plates were fabricated by coating bulk ceramic plate and bonding ceramic tablets with polyurea,...     

温度对黑豆皮活性成分、抗氧化和抗肿瘤活性的影响

在不同温度下用蒸馏水浸提黑豆皮,测定了黑豆皮提取物中总黄酮、总酚、花青素、碳水化合物、蛋白质、糖醛酸等6种活性成分的含量,并体外评估了其抗氧化活性和抗肿瘤活性.结果表明,90℃浸提时,黑豆皮提取物中的总黄酮、总酚、蛋白质、糖醛酸含量最高,分别为(11.555±0.160)％、(1.454±0.070)％、(13.096±0.600)％、(21.587±1.570)％;花青素含量在80℃浸提时达到最高,为(0.199±0.003)％;而碳水化合物的含量则在100℃浸提时达到最高,为(65.566±1.448)％.随着黑豆皮提取物浓度的增加,其总还原能力和对DPPH自由基的清除能力逐渐增强且呈线性关系;黑豆皮提取物具有抑制肿瘤细胞增殖的作用,能够有效抑制人胃腺癌细胞株(BGC-823)、宫颈癌细胞株(HeLa)和人大细胞肺癌细胞株(NCI-H460)的增殖且呈浓度依赖关系.表明黑豆皮提取物具有成为功能性保健品的潜能,为其产业化开发奠定了重要基础.     

Experimental investigation of different morphology textured ceramic tools by in-situ formed for the dry cutting

Surface texture is considered an important measure to improve the cutting performance of a tool. In this study, we have prepared three types of textured and conventional tools on the rake face by an in-situ formed method. During the experiment, the best parameters of three types of textured tools were selected for dry cutting AISI 1045 steel at different cutting speeds. Cutting forces, cutting temperatures, workpiece surface roughness, and tool wear were measured during the cutting process. The results showed that textured tools have significantly reduced cutting force, cutting temperature, and tool wear, and the roughness of the workpiece was improved compared with the conventional tool. The micro-pit texture tool has less stress contact region than the micro-groove width texture tool, but the micro-groove width texture tool exhibiting the best cutting performance. This investigation clearly showed that the textured tool prepared by the in-situ formed method has improved cutting performance.     

An airlight estimation method for image dehazing based on gray projection

Multimedia Tools and Applications - As the key parameter of dehazing algorithms, airlight value directly affect the calculation accuracy of sky region, and any deviation will lead to the chromatic...     

高落差粉尘扩散规律和分布特征

高溜井放矿过程中会形成强大的冲击气流引起粉尘扩散，造成严重的井下环境污染，对其进行有效治理一直是井下通风除尘的工作重心，本工作利用相似实验和数值模拟相结合的方式探究溜井放矿过程中粉尘的扩散规律和分布特征。通过改变放矿质量、矿石粒径、溜井密闭程度、含水率等因素测试不同条件下气流大小和粉尘浓度分布，并利用CFD-DPM耦合方法模拟卸矿过程中的气?固两相流，研究气流和粉尘浓度时空分布特征。结果表明，最大粉尘浓度和风速随放矿质量增加而上升，随颗粒粒径和溜井密闭程度增大而降低，且含水率越大，粉尘浓度越小，风速无明显变化，在放矿过程中矿石颗粒之间碰撞占主导作用，颗粒流呈横向分布。     

空气炮在解决水泥库出库溜子堵塞中的应用

针对水泥库结块经常堵塞下料溜子的问题,决定在溜子处安装空气炮,将空气炮压缩空气出口稍微上扬,以便于击打堵在下料口的结块。经实际使用,效果良好,改善了生产环境,降低了员工的劳动强度。     

Study on depositing SiO2 nanoparticles on the surface of jute fiber via hydrothermal method and its reinforced polypropylene composites

To improve the interfacial compatibility of jute fiber reinforced polypropylene (PP) composites, hydrothermal method was used to deposit SiO₂ nanoparticles on the surface of pretreated jute fibers and the effect of reaction factors (tetraethoxysilane [TEOS] concentration, ammonia concentration, and reaction temperature) on the deposition of SiO₂ nanoparticles were evaluated. The results of FTIR, XRD, SEM, and TEM showed that the amorphous SiO₂ nanoparticles with an average particle size of 65.0 nm were successfully deposited on the surface of jute fibers at the TEOS/H₂O volume ratio of 1:2, ammonia of 0.55 M, reaction temperature of 100 °C (0.15 MPa) for 5 h. Compared with the sol–gel method, SiO₂ nanoparticles obtained by the hydrothermal method possessed smaller particle size and were less agglomerated, which can better fill in the surface defects of the jute fibers and result in a 12.9% increase in the tensile strength. The study on the mechanical properties and interface performance of the jute fiber reinforced PP composites indicated that the interfacial compatibility between jute fibers and PP was obviously improved. The tensile and impact strength of the composites reinforced with nano‐SiO₂ deposited jute fibers were increased by 26.87% and 25.65%, respectively, compared with the untreated jute fibers. J. VINYL ADDIT. TECHNOL., 26:43–54, 2020. © 2019 Society of Plastics Engineers     

Effects of Sr2+ substitution on the crystal structure,Raman spectra,bond valence and microwave dielectric properties of Ba3-xSrx(VO4)2 solid solutions

The effects of Sr²⁺ substitution for Ba²⁺ on microwave dielectric properties and crystal structure of Ba_3-xSr_x(VO₄)₂ (0 ≤ x ≤ 3, BSVO) solid solution were investigated. Such Sr²⁺ substitution contributes to significant reduction in sintering temperature from 1400 °C to 1150 °C. Both permittivity (∑_r) and quality factor (Q × f) values decreased with increasing x value, which was determined to be related with the descending values of average polarizability and packing fraction, whereas the increase in τ_f value was explained by the decreased average VO bond length, A-site bond valence. BSVO ceramics possessed encouraging dielectric performances with ∑_r = 12.2–15.6 ± 0.1, Q × f = 44,340 - 62,000 ± 800 GHz, and τ_f = 24.5–64.5 ± 0.2 ppm/°C. Low-temperature sintering was manipulated by adding B₂O₃ as sintering additive for the representative Sr₃V₂O₈ (SVO) ceramic and only 1 wt.% B₂O₃ addition successfully contributed to a 21.7% decrease in sintering temperature to 900 °C, showing good chemical compatibility with silver electrodes, which render BSVO series and SVO ceramics potential candidates in multilayer electronic devices fabrication.     

黑豆糖蛋白的结构分析及抗氧化和免疫活性

本实验从黑豆中分离得到两种糖蛋白，并对其结构组成、抗氧化活性和免疫活性进行研究，为糖蛋白的高效开发利用提供理论依据。采用碱提醇沉法提取黑豆糖蛋白粗品，命名为HDJ，通过DEAE-52纤维素柱层析和Sephadex G-100柱层析分离纯化获得两个均一组分，分别命名为HDJS2和HDJS5-2。利用物理化学方法和光谱法对其化学组成及结构进行分析，通过测定总还原力、1,1-二苯基-2-三硝基苯肼（2,2-diphenyl-1-picrylhydrazyl，DPPH）清除率及总抗氧化能力研究两种糖蛋白的抗氧化活性，采用噻唑蓝比色法评价两种糖蛋白的免疫活性。结果表明：HDJS2（3.20×104 Da）和HDJS5-2（3.89×104 Da）主要是由中性糖和蛋白质组成的糖蛋白，其糖肽键类型均为O-型糖肽键。HDJS2主要由甘露糖、葡萄糖、半乳糖、阿拉伯糖、岩藻糖和96.1%氨基酸组成；HDJS5-2主要由甘露糖、葡萄糖、半乳糖、阿拉伯糖和71.3%氨基酸组成。抗氧化分析结果表明，HDJS2和HDJS5-2的还原能力、DPPH清除能力和抗氧化能力呈剂量依赖性关系。此外，HDJS2和HDJS5-2均能够促进脾淋巴细胞增殖。结论：HDJS2和HDJS5-2具有潜在的抗氧化作用和免疫调节作用。