Analog Integrated Circuits and Signal Processing - In this paper new continuous-time sigma delta modulator that supports complex band-pass (CBP) architectures with the re-configurable bandwidths of... 相似文献
Wireless Networks - In Wireless Sensor Networks (WSNs), where power consumption is a huge concern, the improvement of the network’s lifetime is an area of constant study and innovation. The... 相似文献
This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures. 相似文献
Biochar has been used as an environment-friendly enhancer to improve the hydraulic properties(e.g.suction and water retention) of soil.However,variations in densities alter the properties of the soil-biochar mix.Such density variations are observed in agriculture(loosely compacted) and engineering(densely compacted) applications.The influence of biochar amendment on gas permeability of soil has been barely investigated,especially for soil with diffe rent densities.The maj or obj ective of this study is to investigate the water retention capacity,and gas permeability of biochar-amended soil(BAS) with different biochar contents under varying degree of compaction(DOC) conditions.In-house produced novel biochar was mixed with the soil at different amendment rates(i.e.biochar contents of 0%,5% and 10%).All BAS samples were compacted at three DOCs(65%,80% and 95%) in polyvinyl chloride(PVC)tubes.Each soil column was subjected to drying-wetting cycles,during which soil suction,water content,and gas permeability were measured.A simplified theoretical framework for estimating the void ratio of BAS was proposed.The experimental results reveal that the addition of biochar significantly decreased gas permeability k_g as compared with that of bare soil(BS).However,the addition of 5%biochar is found to be optimum in decreasing kg with an increase of DOC(i.e.k_(g,65%) k_(g,80%) k_(g,95%)) at a relatively low suction range(200 kPa) because both biochar and compaction treatment reduce the connected pores. 相似文献
Wireless Networks - Femto Cells offer higher data rates to users within closed spaces. Dense deployment of small cells is a characteristic of pre-5G/LTE-Advanced Pro (LTE-A Pro) networks and is a... 相似文献
This article presents a metaheuristic approach, the binary whale optimization algorithm (BWOA), to solve complex, constrained, non-convex, binary-nature profit-based unit commitment (PBUC) optimization problems of a price-taking generation company (GenCo) in the electricity market. To simulate the binary-nature PBUC problem, the continuous, real-value whale position/location is mapped into binary search space through various transfer functions. This article introduces three variants of BWOA using tangential hyperbolic, inverse tangent (arctan) and sigmoidal transfer functions. The effectiveness of the BWOA approaches is examined in test systems with different market mechanisms, i.e. an energy-only market, and energy and reserve market participation with different reserve payment methods. The simulation results are presented, discussed and compared with other existing approaches. The convergence characteristics, solution quality and consistency of the results across different BWOA variants are discussed. The superiority and statistical significance of the proposed approaches with respect to existing approaches is also presented. 相似文献
Wireless Personal Communications - Texture is one of the most significant characteristics of an image for retrieving visually similar patterns. So far, researchers utilize large number of gray... 相似文献
The thermal performance of a solar air collector (SAC) is investigated experimentally under the different climatic conditions of north eastern India using fuzzy logic based expert system (FLES). The FLES based on subtractive clustering (SC) with the fuzzy logic method where here, SC is used for extraction of optimal fuzzy IF-THEN rules while a fuzzy logic is used for modeling of SAC variables. This work considered four input variables [like mass flow rate (m), collector tilt angles (θ), solar radiation (Q), temperature (T)] and the four output variables [i.e. efficiency (η), exergetic efficiency (ηII), temperature rise (∆T), and pressure drop (∆P)]. First, 272 trials of experimentation on SAC are performed by varying m from 0.0078 to 0.0118 kg/s and θ from 30 to 60°, whereas the variation of metrological data is obtained in different working days. Then modeling and parametric analysis is carried out for SAC. Experimental results reveal that the value of η increases with the increase in m, Q, T and θ up to 45°. The higher value of m results in a higher value of ∆P and that reduces the value of ηII. Also, FLES model provides comparable and acceptable values for SAC. At last, validation of the FLES model is done via published data to confirm the results.