Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

关于COVID-19、膜脂质与公众健康（网络首发、推荐阅读）

冠状病毒具有一层脂质膜。虽然复制需要劫持宿主的RNA工具来合成病毒体蛋白，但必须将其包裹在脂质膜中，促其萌生以扩展感染。最近研究表明，某些必需脂肪酸可以抑制其复制活性。脂质膜通常被认为是水溶物的脂肪屏障，但它对细胞和亚细胞的功能是高度有序和组分特异性的，其对病毒外壳可能也有最佳的特异性。虽然复制中DNA、RNA和蛋白质组成不受饮食影响，但脂质膜受其影响。此外，自1960年代以来，人们就知道男性对这些必需脂肪酸和膜完整性不足的敏感性高于女性。有证据表明，花生四烯酸和二十二碳六烯酸具有抗病毒、免疫、抗炎、控制血压和消退素活性，因此，迫切需要考察它们在Covid-19预防和治疗中的地位，也需重新评估现行的膳食指导。当前，有关脑、神经、血管和免疫系统等富含膜系统对脂质需求还尚未被详细认识。毫无疑问，这些脂质在几百万年来塑造人类基因组方面具有重要意义，因此，如果这些膜脂质失衡将会使人类面临机体紊乱和感染风险，且男性比女性风险更大。     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

空间的力量 新奥胡斯大学医院

正新奥胡斯大学医院是丹麦第一个超大型的医院案例,也是一个具有"康复医疗"概念的、超现代的国际先锋作品。医院的建筑设计通过系统运用"信息和循证"的工作方法,践行了"康复建筑"的综合理念。其"信息和循证"的方法是利用对现存建筑的研究和评估,以提供最有效的信息来创建最佳的康复建筑。从单人病房的设计、日光和光线的利用,以及景观和花园空间的设计,旨在尽量满足病人的需求,提升     

Cf/C复合材料与纯铜的胶接辅助钎焊连接

采用胶接辅助钎焊方法,以TiH_2粉为活性元素源,环氧树脂为粘性载体,Ag-Cu共晶合金为钎料,Cu箔为应力缓冲层材料,实现了C_f/C复合材料与纯铜的钎焊连接,结果表明,接头界面处产生TiC,TiCu,Ag(s,s),Cu(s,s)等反应产物,其结构可表示为(C_f/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu。通过钎焊工艺试验得出,在930℃保温25 min钎焊条件下接头的抗剪强度达到最大值30 MPa。     

基于教学诊断与改进构建质量保证体系的研究

在招生考试制度多元化,招生人数日益扩大,而生源质量大幅度下降,就业压力日趋增大的形势下,高职院校只有科学构建并严格实施内部质量保证体系,不断开展教学诊断与改革工作,密切关注人才培养质量,以质量求生存。走在教育教学改革的前沿,才能在竞争中取胜。     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

Nickel phosphonate MOF as efficient water splitting photocatalyst

A novel microporous two-dimensional(2D)Ni-based phosphonate metal-organic framework(MOF;denoted as IEF-13)has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques.Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group Pi having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand.Remarkably,this material exhibits coordinatively unsaturated nickel(II)sites,free-P0₃H₂and-P0₃H acidic groups,a C0₂accessible microporosity,and an exceptional thermal and chemical stability.Further,its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis.In this sense,the photocatalytic activity for challenging H₂generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated,constituting the first report for a phosphonate-MOF photocatalyst.IEF-13 is able to produce up to 2,200 fimol of H₂per gram using methanol as sacrificial agent,exhibiting stability,maintaining its crystal structure and allowing its recycling.Even more,170μmol of H₂per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting,being this reaction limited by the 0₂reduction.The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials.