Stress field and damage evolution in C/SiC woven composites: Image-based finite element analysis and in situ X-ray computed tomography tests

The construction and examination of meso-structural finite element models of a Chemical-Vapor-Infiltrated (CVI) C/SiC composite is carried out based on X-ray microtomography digital images (IB-FEM). The accurate meso-structural features of the C/SiC composites, which are consisted of carbon fiber tows and CVI-SiC matrix, in particular the cavity defects, are reconstructed. With the IB-FEM, the damage evolution and fracture behaviors of the C/SiC composite are investigated. At the same time, an in situ tensile test is applied to the C/SiC composite under a CT real-time quantitative imaging system, aiming to investigate the damage and failure features of the material as well as to verify the IB-FEM. The IB-FEM results indicate that material damage initially occur at the defects, followed by propagating toward the fiber-tow/SiC-matrix interfaces, ultimately, combined into macro-cracks, which is in good agreement with the in situ CT experiment results.     

Preparation,electronic structure and optical properties of CoxLaMg1−xAl11O19 microcrystals

Journal of Materials Science: Materials in Electronics - Co-doped LaMgAl11O19 microcrystals were synthesized by a facile sol–gel method. The as-synthesized microcrystals were near hexagonal...     

Authenticity green coffee bean species and geographical origin using near-infrared spectroscopy combined with chemometrics

To prevent the adulteration of agricultural resources and provide a solution to enhance the green coffee bean supply chain, authentication using the near-infrared spectroscopy (NIRS) technique was investigated. Partial least square with discrimination analysis (PLS-DA) models combined with various preprocessing methods were built from NIR spectra of 153 Vietnamese green coffee samples. The model combined with the standard normal variate and the first order of derivative yielded excellent performance in predicting coffee species with the error cross-validation of 0.0261. PLS-DA model of mean centre and first-order derivative spectra also yielded good performance in verifying geographical indication of green coffee with the error of 0.0656. By contrast, the predicting abilities of post-harvest methods were poor. The overall results showed a high potential of the NIRS in online authentication practices.     

Aqueous-based,high-density nanoporous carbon xerogels with high specific surface area for supercapacitors

Journal of Porous Materials - Electrode materials with high density for assembling supercapacitors with high volumetric capacitance are urgently needed. Herein, nanoporous carbon xerogels (NPCXs)...     

Effect of malondialdehyde oxidation on structure and physicochemical properties of amandin

Oil, accounting for 45% of almonds, is easily oxidised and can further induce the protein oxidation to reduce their quality. Structure and physicochemical properties of amandin, the main water-soluble protein in almonds, inducing oxidation by malondialdehyde (MDA) were investigated. The results showed that the content of carbonyl group increased from 5.23 to 33.25 nmol mg⁻¹ of protein with the increase in MDA concentration (P < 0.05). However, the sulphydryl content, surface hydrophobicity, particle size and the absolute value of ζ-potential first increased and then decreased. Fourier-transformed infrared spectroscopy (FT-IR) confirmed that the structure of amandin changed from order to disorder. Fluorescence spectroscopic analysis revealed that mild oxidation (0–0.1 mmol L⁻¹ MDA) exposed hydrophobic groups of the protein. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) suggested that protein oxidation promoted crosslinking between protein molecules. Furthermore, protein oxidation markedly declined the total amino acid content of amandin (P < 0.05). In conclusion, MDA oxidation changed the structure and amino acid content of amandin, and caused the protein aggregate and crosslink through hydrophobic interaction and electrostatic interaction.     

激光刻痕对取向电工钢磁畴和铁损的影响

为了研究激光刻痕工艺参数对取向电工钢表面的磁畴形貌、刻痕线宽度和铁损的影响规律，开展了激光刻痕工艺试验。结果表明，激光刻痕后取向电工钢表面的磁畴宽度明显细化，且随着输入电流的增加，磁畴宽度先减小后增大；刻痕线宽度随着输入电流的增加而增大。对于本次试验样品，通过对比分析，确定最佳激光刻痕工艺参数为电流为 12 A，激光频率为 5 kHz，刻痕速度为 800 mm/s，该参数下铁损改善率可达 11.81%。     

A solution to measure traveler’s transfer tolerance for walking mode and dockless bike-sharing mode

The Journal of Supercomputing - Dockless bike-sharing is more and more popular all over the world, which enables passengers to choose destinations more flexibly, so that the transfer radius between...     

玻璃纤维和硅酸钠复合对盐石膏性能的影响

盐石膏的水化强度极低,需通过添加外加剂来改善盐石膏的强度,本文通过在盐石膏中单掺玻璃纤维、硅酸钠及两者复合来改善盐石膏的性能.结果 表明,单掺玻璃纤维提高了盐石膏的强度,在纤维掺量为0.20％时,盐石膏的性能较佳;单掺硅酸钠缩短了盐石膏的凝结时间,提高了它的强度,在硅酸钠掺量为3％时,它的抗折强度和抗压强度较高;两者复合可显著改善盐石膏的强度等综合性能.分析表明,玻璃纤维像微钢筋一样穿插于石膏晶体中间,增加了晶体间的搭接;硅酸钠通过在石膏表面形成致密的硅酸钙层,使其硬化体结构变得致密,从而提高了盐石膏的强度.     

纳米技术浮选技术研究进展

本文简述了微细粒矿物资源开发利用现状、纳米技术概况和纳米捕收剂的应用。介绍了纳米技术在微细粒矿物浮选中应用发展趋势。重点介绍了纳米气泡的基本性质、纳米药剂的合成以及纳米捕收剂应用现状。研究发现纳米气泡在微细粒浮选中可以大幅度提高浮选效率,尽可能减小气泡尺寸有利于细矿粒的浮选。纳米药剂的合成存在诸多困难,乳化合成是主要的纳米粒子的合成方法。应用纳米技术合成新型浮选药剂是未来的发展方向。     

Airborne spread of expiratory droplet nuclei between the occupants of indoor environments: A review

This article reviews past studies of airborne transmission between occupants in indoor environments, focusing on the spread of expiratory droplet nuclei from mouth/nose to mouth/nose for non‐specific diseases. Special attention is paid to summarizing what is known about the influential factors, the inappropriate simplifications of the thermofluid boundary conditions of thermal manikins, the challenges facing the available experimental techniques, and the limitations of available evaluation methods. Secondary issues are highlighted, and some new ways to improve our understanding of airborne transmission indoors are provided. The characteristics of airborne spread of expiratory droplet nuclei between occupants, which are influenced correlatively by both environmental and personal factors, were widely revealed under steady‐state conditions. Owing to the different boundary conditions used, some inconsistent findings on specific influential factors have been published. The available instrumentation was too slow to provide accurate concentration profiles for time‐dependent evaluations of events with obvious time characteristics, while computational fluid dynamics (CFD) studies were mainly performed in the framework of inherently steady Reynolds‐averaged Navier‐Stokes modeling. Future research needs in 3 areas are identified: the importance of the direction of indoor airflow patterns, the dynamics of airborne transmission, and the application of CFD simulations.