Chitosan Microspheres as Carriers for pH‐Indicating Species in Corrosion Sensing

Chitosan microspheres containing bromocresol green, cresol red, and phenolphthalein for corrosion detection, through pH change, are synthesized in order to be used in protective coatings for aluminium alloys. Microspheres containing corrosion detection species are characterized morphologically (SEM) and physico‐chemically (FTIR, TGA). Release studies (UV–vis) are performed in corrosion‐promoting conditions (pH, NaCl), and detection studies by immersion in media associated with corrosion activity while microspheres' sensing activity is evaluated visually. Electrochemical characterization of AA2024 substrates in the presence of chitosan spheres is performed to understand material performance, and a color change is observed as a result of local pH increase in cathodic areas when corrosion takes place. These findings can be correlated with the results from release studies and seem a promising approach for corrosion sensing purposes, not only because pH increase is possible to detect due to corrosion, but also because chitosan is considered an environmentally friendly material.     

Linking entrepreneurial orientation to project success

Entrepreneurial orientation (EO) is a strategic posture of an organization, and it is related to basic policies and practices for the development of entrepreneurial actions looking for creating competitive advantages. This study develops and tests a model of the relationship between entrepreneurial orientation and project success in Brazilian context. As quantitative research, a survey was used to collect data. A sample of 100 valid answers from project practitioners was treated through the structural equation modeling method. As research implications, the main result points out the positive correlation between the entrepreneurial orientation and the project success, contributing to the development of this research subject and helping to minimize the gap in the literature that addresses the relationship between project success and EO. In practical terms, understanding that innovativeness, risk taking, proactiveness, autonomy and competitive aggressiveness (the dimensions of the EO) can contribute to project success and can also indirectly impact on organizational performance, could help organizations get competitive advantage when developing correlate factors. Finally, the results suggest that practices of project management can be aligned to the firm's entrepreneurial orientation to enable firms to attain better results in their projects and generate a competitive advantage. On other hand, given the proportion of the impact of EO on project success (20.3%) identified in this study, it is critical that project management professionals expand their horizon to recognize other factors that affect project success.     

Triethanolamine Stabilization of Methotrexate-β-Cyclodextrin Interactions in Ternary Complexes

The interaction of methotrexate (MTX) with beta-cyclodextrin (β-CD) in the presence of triethanolamine (TEA) was investigated with the aim to elucidate the mechanism whereby self-assembly cyclodextrin systems work in association with this third component. Solubility diagram studies showed synergic increment of the MTX solubility to be about thirty-fold. Experiments using 2D ROESY and molecular modeling studies revealed the inclusion of aromatic ring III of the drug into β-CD cavity, in which TEA contributes by intensifying MTX interaction with β-CD and stabilizes MTX:β-CD:TEA ternary complex by electrostatic interaction. The maintenance of these interactions in solid phase was also studied in ternary MTX:β-CD:TEA and comparisons were made with freeze dried binary MTX:β-CD and physical mixtures. FTIR studies evidenced that MTX–β-CD interaction remained in solid ternary complexes, which was also supported by thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TG)/first derivative of TG analysis (DTG) and C,N,H elementary analysis) and structural (X-ray diffraction analysis, (XRD)) studies, mainly regarding the increment of drug stability. The efficient in vitro drug dissolution studies successfully demonstrated the contribution of ternary complexes, which highlights the importance of this possible new raw material for further applications in drug delivery systems.     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

Adaptive controller placement for wireless sensor–actuator networks with erasure channels

Wireless sensor–actuator networks offer flexibility for control design. One novel element which may arise in networks with multiple nodes is that the role of some nodes does not need to be fixed. In particular, there is no need to pre-allocate which nodes assume controller functions and which ones merely relay data. We present a flexible architecture for networked control using multiple nodes connected in series over analog erasure channels without acknowledgments. The control architecture proposed adapts to changes in network conditions, by allowing the role played by individual nodes to depend upon transmission outcomes. We adopt stochastic models for transmission outcomes and characterize the distribution of controller location and the covariance of system states. Simulation results illustrate that the proposed architecture has the potential to give better performance than limiting control calculations to be carried out at a fixed node.     

Protecting against corner impacts: sensitivities discovered during a rail cask impact limiter design

Type B packages for the transportation of radioactive materials must remain ‘essentially leak tight’ under severe regulatory accident conditions, defined in the US Nuclear Regulatory Commission’s 10 CFR 71·73 and the International Atomic Energy Agency’s TS-R-1. The 9-m free drop test requirement onto an unyielding surface is performed in an orientation ‘for which maximum damage is expected’. Analytical techniques are used to evaluate various possible impact orientations before testing, and historically these maximal damage orientations have been side, slap-down, end, and centre-of-gravity over corner. Other orientations are rarely considered. Sandia National Laboratories (SNL) was asked by Equipos Nucleares SA (ENSA) to design, analyse, and test an impact limiter system for a newly designed rail cask. During the conceptual design process, SNL performed due diligence and evaluated a wide spectrum of possible impact orientations, in order to assure that peak cask body acceleration design goals were not exceeded. However, design of the impact limiter, including not only crush strength of constituent materials (which can be orientation and temperature dependent), but also the shape of the impact limiter, greatly affects peak acceleration response during 9-m drops in various orientations. Although many impact limiter design shapes resemble truncated right circular cylinders attached to each end of the cask, some tend to round the outer corners or truncate those corners with conical sections. SNL’s original conceptual design followed a similar theme, intending to use polyurethane foam or aluminium honeycomb within a bevelled corner shaped cylindrical shell. Detailed finite element analyses indicated excellent impact resistance at regulatory cold temperatures in the stereotypically tested side, slap-down, end, and CGOC impact orientations. Shortly before proceeding to engineering design, a rarely-considered impact orientation of 45° from horizontal indicated that cask body acceleration levels jumped unexpectedly, exceeding the design goal due to insufficient crushable material protecting the sharp corner of the cask. A complete re-design of the impact limiter was necessary, and the lessons learned from this experience could have implications for future impact limiter designs, and possibly existing designs that may not have considered this atypical impact orientation during the design process.     

The effect of montmorillonite and compatibilizer quantities on stiffness and toughness of polyamide nanoblends

Although polymer blend nanocomposites are widely studied, the balance between stiffness and toughness has not yet been investigated in detail. Some materials producers as well as some sectors in the automotive industry try to improve the toughness of materials without an important loss in stiffness. With this in mind, the aim of the study reported here was to obtain a good balance between toughness and stiffness of polymer blends with different amounts of clay and compatibilizer. In this context, the microstructure of polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with various amounts of clay (2, 3, 4 and 5 wt%) and compatibilizer (10 and 20 wt%) was studied to analyse the achieved morphology to understand the macroscopic properties. The morphology of the rubber phase and the dispersion of the montmorillonite (MMT) are the main factors that influence the mechanical properties. In this sense, the highest Young's modulus is achieved for nanoblends with 5 wt% of MMT, although this nanoblend has the lowest value of notched Izod impact strength. The results obtained suggest that there is a clear trade‐off between stiffness, toughness and temperature behaviour when the ratio of (ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) to MMT is 5:1. Copyright © 2009 Society of Chemical Industry     

Is the insect glutathione S-transferase I gene family intronless?

Salmonella requires its alternative sigma factor sigma S (RpoS) for virulence in mice. rpoS mutants can be frequently isolated from highly passaged Salmonella laboratory strains. In particular, the live typhoid oral vaccine Salmonella typhi Ty21a and its parental strain Ty2, a 'wild-type' strain widely used for vaccine development, are rpoS mutants. Here, we show that the nucleotide sequence of the rpoS mutant allele of Ty2 is identical to that of the rpoS mutant allele of Ty21a. This demonstrates that the rpoS mutation arose in Ty2 before the isolation of Ty21a in 1975, an observation that may have implications for vaccine research.     

Preoperative considerations with herbal medicines

More patients are using herbal remedies. Even though herbs are natural products, they often act like medications and may interact with or potentiate other medications. During a preoperative evaluation, nurses should ask patients about their use of herbal remedies. Certain herbs are dangerous and should never be taken, and others must be avoided before elective surgery. Today's perioperative health care professionals must become familiar with basic information about herbs to carry out thorough assessments. At times, caregivers may need to educate and counsel consumers about benefits and harmful aspects of herbal preparations.     

Response of microglial cells after a cryolesion in the peripheral proliferative retina of tench

We studied the glial response after inducing a lesion in the zone of the peripheral retina of tench, where there is proliferative neuroepithelium. In the retina and optic nerve, the microglial response was analysed with tomato lectin and the macroglial response with antibodies against GFAP and S-100. In lesioned retinas, there was a temporal-spatial distribution pattern of microglia. One day after lesion, primitive ramified cells appeared in the nerve fibre layer. These cells appeared progressively from the vitreal to the scleral layers until day 7 when cells appeared in all layers, with the exception of the outer plexiform layer. From this point, labelling decreased. In the optic nerve, 3 days after lesion, an increase in the number of microglial cells was observed, first in the nerve folds and from day 15 in specific areas of the optic nerve. In the central retina, in the optic nerve head and within the optic nerve itself, the appearance of microglial cells, after the lesion, near the blood vessels, could indicate a vascular origin of microglia, as has been proposed by many authors. However, we cannot discount the idea that some of the reactive microglial cells arise by proliferation of the microglia existing in the normal state. Using GFAP and S-100 antibodies, no important changes in the retina were observed, however in the optic nerve there was response to the lesion. Thus, the macroglial cells appeared to be involved in reorganisation of the optic nerve axons after lesion.