High-intensity ultrasound processed acerola juice containing oligosaccharides and dextran promotes Lacticaseibacillus casei NRRL B-442 growth

In the present study, a prebiotic acerola juice containing gluco-oligosaccharides and dextran was produced and processed by high-intensity ultrasound (HIUS). After a simulated in vitro digestion, the gluco-oligosaccharides and dextran maintained 90% and 80% of their initial concentration in all prebiotic’s juices. At the same time, Vitamin C and phenolic compounds concentration increased significantly by 19% and 7% (P < 0.05). After the in vitro digestion, the prebiotic juice HIUS processed by 10 min showed the highest increase in gluco-oligosaccharides and bioactive compound concentrations. The HIUS processing imparted some dextran hydrolysis and improved its fermentability by Lacticaseibacillus casei. Gluco-oligosaccharides were extensively consumed as substrate in simulated intestinal conditions, promoting the L. casei NRRL B-442 growth and production of organic acids and short-chain organic acids. The prebiotic juice HIUS processed for 6 min showed the best responses regarding the metabolism of L. casei NRRL B-442. The results showed high-intensity ultrasound processed acerola juices containing gluco-oligosaccharides and dextran as a prebiotic food.     

Prediction models for multiphase-flow-induced corrosion of API X80 steel in CO2/H2S environment

In the offshore oil and gas industry, mainly focusing on the use of rigid or flexible pipes of subsea infrastructure applied to risers or flowlines, one of the greatest difficulties is the interpretation of the combined effects of the various correlated phenomena (hydrodynamic effects of intermittent flow, the effects of corrosivity of the environment in addition to variations in pressure, temperature, and dynamic loading). On the basis of this scenario, defining the degree of severity of each of the correlated system variables becomes of fundamental importance for establishing reliable criteria for selecting materials for subsea application. The established flow pattern directly affects the corrosion rate (or the pipe material mass loss), but the balance of other variables including possible changes in the physical and transported fluid chemical properties may increase the damage up to an order of magnitude, which is a piece of information normally not foreseen in design criteria. Therefore, to improve the understanding of the corrosion study influenced by multiphase flow, a testing loop was designed and assembled at the Corrosion and Protection Laboratory of the Institute for Technological Research, in which API X80 steel coupons were positioned in locations with a 0° and 45° inclinations. Tests were conducted by varying the partial pressure of the gaseous phase containing blends of CO₂ and H₂S with N₂ balance, mixed with the liquid phase containing light oil and heavy oil in water with salinity (NaCl)-simulating oil well conditions with 80% water cut. The main objective of this study is to establish models that can predict the corrosion intensity in conditions close to those obtained experimentally. To achieve results, the multiple regression and Box–Cox transformation methods were applied. These models will make possible damage prediction and optimization of matrix parameters for the multiphase-loop test.     

Response of Corn Seedlings (Zea mays L.) to Different Concentrations of Nitrogen in Absence and Presence of Silicon

Silicon - Corn plants are highly demanding of nitrogen and the application of silicon has been studied because it minimizes stress from different natures, and for the better utilization of some...     

Nanocomposite powders of hydroxyapatite-graphene oxide for biological applications

The repair of bone fractures is a clinical challenge for patients with impaired healing, such as osteoporosis. Currently, different strategies have been developed to design new biomaterials, enhancing their interactions with biological systems and conducting the cellular behavior in the desired direction to help fracture healing. In the present work, hydroxyapatite-graphene oxide (HA-GO) nanocomposites were produced and the morphological and physicochemical influences of the addition of 0.5 wt%, 1.0 wt% and 1.5 wt% of GO to HA were observed. FEG-SEM and TEM analyses of HA-GO nanocomposites showed HA nanoparticles adhered to the surface of the GO sheets, suggesting an effective method to form nanostructured graphene-based biomaterials. As confirmation, physicochemical analyses by Raman, FTIR and TGA demonstrated a strong affinity between HA and GO, according to the increase of concentration from 0.5 wt% to 1.5 wt% GO in the HA-GO nanocomposites. Also, in order to evaluate the HA-GO nanocomposites behavior under biological microenvironment, in vitro bioactivity and indirect cytotoxicity tests were performed. FEG-SEM analyses confirmed the positive results for the bioactivity properties of HA-GO nanocomposite and indirect cytotoxicity demonstrated that even with a decrease in the hDPSCs viability and proliferation, when increasing to 1.5 wt% of GO concentration, high level of cell viability was exhibited by HA-GO nanocomposites. These biological results suggested the 0.5 wt% HA-GO nanocomposite as a potential bioactive bone graft and a promising biomaterial for bone tissue regeneration, when compared to the pure HA.     

Quality and safety of maize (Zea mays L.) from Rondônia state storage units,Northern Brazil

The quality and safety of maize (Zea mays L.) from different grain storage units (GSUs), located in the main producing region of Rondônia State, Northern Brazil, were evaluated. Maize grains (n = 76) stored in four GSUs were collected from July to November 2014 and evaluated for grain damages, humidity, fungi and fumonisins (FBs) content. The climate conditions data were also obtained from plant growing to storage periods. Regarding the moisture content and water activity (a_w), these varied from 10.0% to 16.1% and 0.5 to 0.8, respectively. As expected, fungi spores were present in 94.8% of the samples, prevailing Fusarium genera, with a fungi colony maximum of 2.2 × 10⁴ CFU g^?1. Regarding FBs, 60.5% of the samples were contaminated, below Brazilian and United States maximum limits, but 9.2% had levels higher than the European legislation.     

Gellan gum–O,O′‐bis(2‐aminopropyl)‐polyethylene glycol hydrogel for controlled fertilizer release

A gellan gum–Jeffamine superabsorbent hydrogel was obtained with different crosslink densities using different amounts of (1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide hydrochloride) and N‐hydroxysuccinimide. Infrared spectroscopy and thermal analysis confirm the crosslinking. A morphology analysis indicates denser structures for samples with higher crosslinking points. The swelling degree in high‐acyl gellan gum hydrogels was equivalent to 145 times their dry weight, and 77 times when low‐acyl gellan gum was used. Hydrogels also showed a 450 min water retention, as opposed to 280 min for pure water, evidencing good humidity control, suitable for use in arid climates. They also demonstrated a maximum release of commercial fertilizer of about 400 mg per gram for KH₂PO₄ and about 300 mg per gram for NPK 20‐5‐20. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45636.     

Effect of the doping time of the 1‐butyl‐3‐methylimidazolium ionic liquid cation on the Nafion membrane proprieties

Nafion membranes were prepared by incorporating in the polymer matrix the 1‐butyl‐3‐methylimidazolium (BMI⁺) ionic liquid cation at different doping levels. Increasing the doping time of the membranes with the ionic liquid results in increased incorporation of the BMI⁺ cation but a decrease in the bulk conductivity. The thermogravimetric analysis shows that the BMI⁺ cation incorporation increases the thermal stability of the membranes. The higher discharge efficiency of the fuel cell at 80°C was obtained by using Nafion membrane after 15 minutes of doping in the ionic liquid solution.     

Linking entrepreneurial orientation to project success

Entrepreneurial orientation (EO) is a strategic posture of an organization, and it is related to basic policies and practices for the development of entrepreneurial actions looking for creating competitive advantages. This study develops and tests a model of the relationship between entrepreneurial orientation and project success in Brazilian context. As quantitative research, a survey was used to collect data. A sample of 100 valid answers from project practitioners was treated through the structural equation modeling method. As research implications, the main result points out the positive correlation between the entrepreneurial orientation and the project success, contributing to the development of this research subject and helping to minimize the gap in the literature that addresses the relationship between project success and EO. In practical terms, understanding that innovativeness, risk taking, proactiveness, autonomy and competitive aggressiveness (the dimensions of the EO) can contribute to project success and can also indirectly impact on organizational performance, could help organizations get competitive advantage when developing correlate factors. Finally, the results suggest that practices of project management can be aligned to the firm's entrepreneurial orientation to enable firms to attain better results in their projects and generate a competitive advantage. On other hand, given the proportion of the impact of EO on project success (20.3%) identified in this study, it is critical that project management professionals expand their horizon to recognize other factors that affect project success.     

Lipidation of Antimicrobial Peptides as a Design Strategy for Future Alternatives to Antibiotics

Multi-drug-resistant bacteria are becoming more prevalent, and treating these bacteria is becoming a global concern. One alternative approach to combat bacterial resistance is to use antimicrobial (AMPs) or host-defense peptides (HDPs) because they possess broad-spectrum activity, function in a variety of ways, and lead to minimal resistance. However, the therapeutic efficacy of HDPs is limited by a number of factors, including systemic toxicity, rapid degradation, and low bioavailability. One approach to circumvent these issues is to use lipidation, i.e., the attachment of one or more fatty acid chains to the amine groups of the N-terminus or a lysine residue of an HDP. In this review, we examined lipidated analogs of 66 different HDPs reported in the literature to determine: (i) whether there is a link between acyl chain length and antibacterial activity; (ii) whether the charge and (iii) the hydrophobicity of the HDP play a role; and (iv) whether acyl chain length and toxicity are related. Overall, the analysis suggests that lipidated HDPs with improved activity over the nonlipidated counterpart had acyl chain lengths of 8–12 carbons. Moreover, active lipidated peptides attached to short HDPs tended to have longer acyl chain lengths. Neither the charge of the parent HDP nor the percent hydrophobicity of the peptide had an apparent significant impact on the antibacterial activity. Finally, the relationship between acyl chain length and toxicity was difficult to determine due to the fact that toxicity is quantified in different ways. The impact of these trends, as well as combined strategies such as the incorporation of d- and non-natural amino acids or alternative approaches, will be discussed in light of how lipidation may play a role in the future development of antimicrobial peptide-based alternatives to current therapeutics.