High-intensity ultrasound processed acerola juice containing oligosaccharides and dextran promotes Lacticaseibacillus casei NRRL B-442 growth

In the present study, a prebiotic acerola juice containing gluco-oligosaccharides and dextran was produced and processed by high-intensity ultrasound (HIUS). After a simulated in vitro digestion, the gluco-oligosaccharides and dextran maintained 90% and 80% of their initial concentration in all prebiotic’s juices. At the same time, Vitamin C and phenolic compounds concentration increased significantly by 19% and 7% (P < 0.05). After the in vitro digestion, the prebiotic juice HIUS processed by 10 min showed the highest increase in gluco-oligosaccharides and bioactive compound concentrations. The HIUS processing imparted some dextran hydrolysis and improved its fermentability by Lacticaseibacillus casei. Gluco-oligosaccharides were extensively consumed as substrate in simulated intestinal conditions, promoting the L. casei NRRL B-442 growth and production of organic acids and short-chain organic acids. The prebiotic juice HIUS processed for 6 min showed the best responses regarding the metabolism of L. casei NRRL B-442. The results showed high-intensity ultrasound processed acerola juices containing gluco-oligosaccharides and dextran as a prebiotic food.     

Microstructural development during crystallization firing of a dental-grade nanostructured lithia-zirconia glass-ceramic

The microstructural development during crystallization firing of a commercially-available dental-grade nanostructured lithia-zirconia glass-ceramic (Vita Suprinity® PC) was unraveled using a wide battery of ex-situ and in-situ characterization techniques. It was found that the milling blocks are slightly crystallized glass-ceramics, with a complex chemical composition and consisting of partially de-polymerized glass plus lithium silicate (Li₂SiO₃) nanocrystals. It was also found that during crystallization firing the glassy matrix first reacts with part of the Li₂SiO₃ to form lithium disilicate (Li₂Si₂O₅) at ～810?820 °C, and then lithium orthophosphate (Li₃PO₄) precipitates from the glass. This results in glass-ceramics with abundant nanocrystals embedded in a sparse zirconosilicate glass matrix (containing many other cations subsumed) that, due to its high viscosity, inhibited crystal growth. Therefore, these dental glass-ceramics are not reinforced with zirconia (ZrO₂) crystals unless over-fired above ～890 °C and at the expense of its singular nanostructure. Finally, this study opens doors for optimizing the clinical performance of these dental glass-ceramics via microstructural tailoring.     

Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al₂O₃ sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.     

Physicochemical and technological properties of beef burger as influenced by the addition of pea fibre

This study aimed to evaluate the physicochemical characteristics and sensory attributes of beef burgers with the addition of pea fibre as a partial substitute of meat or fat. Three formulations were prepared: control (CON) – similar to the commercial formulation; fibre/less meat (FLM)—5% meat reduction and addition of 1% pea fibre; fibre/less fat (FLF)—7% fat reduction and addition of 1% pea fibre. Non-significant differences were obtained for pH, colour parameters (L* and b*), texture profile, cooking loss and size reduction among formulations. Moreover, sensory analysis with consumers of beef burgers did not indicate differences among the formulations for all the analysed attributes. Therefore, pea fibre is a promising partial replacer for meat and fat in beef burgers due to the preservation of technological parameters and sensory acceptance.     

Linking entrepreneurial orientation to project success

Entrepreneurial orientation (EO) is a strategic posture of an organization, and it is related to basic policies and practices for the development of entrepreneurial actions looking for creating competitive advantages. This study develops and tests a model of the relationship between entrepreneurial orientation and project success in Brazilian context. As quantitative research, a survey was used to collect data. A sample of 100 valid answers from project practitioners was treated through the structural equation modeling method. As research implications, the main result points out the positive correlation between the entrepreneurial orientation and the project success, contributing to the development of this research subject and helping to minimize the gap in the literature that addresses the relationship between project success and EO. In practical terms, understanding that innovativeness, risk taking, proactiveness, autonomy and competitive aggressiveness (the dimensions of the EO) can contribute to project success and can also indirectly impact on organizational performance, could help organizations get competitive advantage when developing correlate factors. Finally, the results suggest that practices of project management can be aligned to the firm's entrepreneurial orientation to enable firms to attain better results in their projects and generate a competitive advantage. On other hand, given the proportion of the impact of EO on project success (20.3%) identified in this study, it is critical that project management professionals expand their horizon to recognize other factors that affect project success.     

A theoretical and experimental study of phosphate ester inhibitors for AISI 1018 in carbon dioxide-saturated 3.5 wt% NaCl solution

Phosphate ester was investigated as a corrosion inhibitor for AISI 1018 carbon steel in carbon dioxide-saturated chloride solutions at different temperatures and pressures. The corrosion tests were realized by electrochemical techniques, weight loss measurements, bubble tests, and a high-pressure/high-temperature autoclave system. The corrosion tests demonstrated that the investigated molecule is an excellent corrosion inhibitor. The inhibiting effect is even bigger at high pressure and temperature than at atmospheric pressure and room temperature. The thermodynamic parameters were calculated and determined to obey the Langmuir isotherm. Polarization studies revealed that the evaluated inhibitor is a mixed type.     

Combining 1,3-Ditriazolylbenzene and Quinoline to Discover a New G-Quadruplex-Interactive Small Molecule Active against Cancer Stem-Like Cells

Quadruplex nucleic acids are promising targets for cancer therapy. In this study we used a fragment-based approach to create new flexible G-quadruplex (G4) DNA-interactive small molecules with good calculated oral drug-like properties, based on quinoline and triazole heterocycles. G4 melting temperature and polymerase chain reaction (PCR)-stop assays showed that two of these compounds are selective G4 ligands, as they were able to induce and stabilize G4s in a dose- and DNA sequence-dependent manner. Molecular docking studies have suggested plausible quadruplex binding to both the G-quartet and groove, with the quinoline module playing the major role. Compounds were screened for cytotoxicity against four cancer cell lines, where 4,4′-(4,4′-(1,3-phenylene)bis(1H-1,2,3-triazole-4,1-diyl))bis(1-methylquinolin-1-ium) ( 1 d ) showed the greater activity. Importantly, dose–response curves show that 1 d is cytotoxic in the human colon cancer HT-29 cell line enriched in cancer stem-like cells, a subpopulation of cells implicated in chemoresistance. Overall, this study identified a new small molecule as a promising lead for the development of drugs targeting G4 in cancer stem cells.