A study on physical and mechanical properties for soft to firm clays in Yangon area – Properties of clays deposit at the sedimentary basins in Myanmar

Recently, a great deal of foreign investment has been entered into construction of the social infrastructure of Myanmar. Many construction projects are therefore on-going, and these are especially planned in the Yangon area. While these construction booms are increasing, existing studies on the geotechnical problems in the Yangon area such as problematic soils like soft clays are limited at present. Information on soil properties has also not been shared and has been confined to individual projects. In this paper, the boring and laboratory tests carried out in the Yangon area are selected and focused upon among the tests carried out in Myanmar. Laboratory test results for clay deposits in the Yangon area are analyzed and the differences in soil properties between different sedimentary basins and sub-areas divided by the Tertiary sediment ridge that runs from north to south at the center of Yangon are clarified together with a comparison to the clays found in other countries, which have been previously investigated.     

Total reflection X-ray spectroscopy as a rapid analytical method for uranium determination in drainage water

Uranium concentrations in drainage water are typically determined by α-spectrometry. However, due to the low specific radioactivity of uranium, the evaporation of large volumes of drainage water, followed by several hours of measurements, is required. Thus, the development of a rapid and simple detection method for uranium in drainage water would enhance the operation efficiency of radiation control workers. We herein propose a novel methodology based on total reflection X-ray fluorescence (TXRF) for the measurement of uranium in contaminated water. TXRF is a particularly desirable method for the rapid and simple evaluation of uranium in contaminated water, as chemical pretreatment of the sample solution is not necessary, measurement times are typically several seconds, and the required sample volume is low. We herein employed sample solutions containing several different concentrations of uranyl acetate with yttrium as an internal standard. The solutions were placed onto sample holders, and were dried prior to TXRF measurements. The relative intensity, otherwise defined as the net intensity ratio of the Lα peak of uranium to the Kα peak of yttrium, was directly proportional to the uranium concentration. Using this method, a TXRF detection limit for uranium in contaminated water of 0.30 µg/g was achieved.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Engineering of novel tamavidin 2 muteins with lowered isoelectric points and lowered non-specific binding properties

The avidin-biotin interaction is widely employed as a universal tool in numerous biotechnological applications. In avidin-biotin technology, non-specific binding to biological macromolecules is a hindrance. The major origin of this non-specific binding is the electrical charge of the surface of biotin-binding proteins. Tamavidin 2, a fungal avidin-like protein that binds biotin with an extremely high affinity, can be produced as a soluble recombinant protein in Escherichia coli. The isoelectric point of tamavidin 2 is 7.4-7.5, lower than avidin (10.0), and slightly higher than that of streptavidin (6.0-7.5). Here, we genetically engineered charge mutants of tamavidin 2 to reduce non-specific binding. By substituting an acidic residue (glutamic acid) for basic residues (arginine and lysine), we constructed three mutant proteins (muteins) and confirmed their high-level production in soluble form in E. coli, as well as that of tamavidin 2.?We then tested these proteins for non-specific binding to salmon sperm DNA, glycoproteins (integrin and fibronectin), and IgG from human sera. The muteins showed lower non-specific binding than tamavidin 2 to these macromolecules. In particular, one mutein, tamavidin-R104EK141E, which had the lowest isoelectric point (5.8-6.2) among avidin, streptavidin and tamavidin 2, displayed the lowest non-specific binding. The affinity of this mutein to biotin was high, comparable with that of tamavidin 2. These findings indicate that tamavidin-R104EK141E has the potential to serve as a robust tool in the numerous applications of biotin-binding proteins.     

Abnormal myelination in a patient with ring chromosome 18

BACKGROUND: Most adult anatomical texts state that the deep inguinal ring is situated midway between the anterior superior iliac spine and the pubic tubercle. The aim of this study was to determine if this was true in prepubescent children. METHODS: A total of 107 inguinal ligaments and canals were measured during inguinal operations in 80 children (68 boys, age range 1-118 months). RESULTS: The length of the inguinal ligament increased from a median of 4.3 cm (range 3.6-6.8) at less than 1 year of age to 7.5 cm (range 6.7-10.1) at over 4 years of age. The internal ring was situated medial to the midpoint of the inguinal ligament throughout childhood. The ratio of internal ring to public tubercle over inguinal ligament length was 42% (range 27-58) at less than 2 years; and 34% (range 25-46) at over 4 years. The inguinal canal remained short (median 1 cm (range 0.7-1.1) at less than 2 years, and median 1.1 cm (range 0.7-2.3) at over 4 years) suggesting that growth of the inguinal region in this age group occurs outside the canal. CONCLUSIONS: These results have implications for the siting of incisions, and question the necessity of opening the inguinal canal in children.     

Roles of precipitates on corrosion fatigue crack growth of high-strength steels in corrosive environments

The effect of microstructures on resistance to corrosion fatigue cracking and fracture surface morphology for age-hardened steels were investigated in a 3.5% NaCl aqueous solution under a cathodic potential of –0.85 V (Ag/AgCl). The free corrosion was about –0.63 V (Ag/AgCl). The resistance to corrosion fatigue cracking of materials containing coherent precipitates in the matrix (underaged conditions) was less than that of materials containing incoherent precipitates (reheated conditions) at equal strength levels. Accelerated fatigue crack growth rates of the underaged material in the aqueous solution were followed by cracking along prior-austenite grain boundaries, due to hydrogen embrittlement, while the overaged material did not show accelerated fatigue crack growth rates and had fracture surfaces similar to those in air. The difference in the fracture surfaces of both materials in air and in the aqueous solution was considered to depend on the ease of diffusion of hydrogen to the prior-austenite grain boundaries. It is concluded that incoherent precipitates in the matrix made hydrogen accumulation at prior-austenite grain boundaries much slower than for coherent precipitates.     

Potential of renewable energy sources and its applications in Yakushima Island

A study was carried out to see if the potential of renewable energy sources other than hy droelectric power, such as wind, photovoltaic, solar thermal, biomass and waste energy sources, can meet the current energy consumption in Yakushima. The current electricity consumption can be covered by wind and photovoltaic energy sources. The total potential of wind and photovoltaic energy sources is 5.4 times as much as the current electricity consumption. LP gas and kerosene can be replaced by solar thermal and biogas energy. The potential of plant biomass and municipal waste is not sufficient (approximately one third) to cover the rest of the fossil fuels (gasoline, diesel oil and heavy oil). Also, plant biomass and municipal waste must be converted into fluid form. This shortage can be covered by the po tential of wind and photovoltaic energy sources. We also investigated the possibility of tourism expansion using the potential of wind and photovoltaic energy sources. Taking into account three types of capacity (energy, accommodation and transportation), Yakushima can accept approximately four times as many tourists as the current number of tourists.     

Identification of Aloe species by random amplified polymorphic DNA (RAPD) analysis

Juice and integument of leaves of 3 Aloe species, Aloe vera, A. ferox and A. africana, are not allowed to be used as food according to the Pharmaceutical Affairs Law in Japan. On the other hand, whole leaves of A. arborescens can be used as food. The present study was designed to distinguish Aloe species by random amplified polymorphic DNA (RAPD) analysis. DNA was isolated from fresh and dried leaves of the 4 Aloe species. Five out of 32 different 10-mer primers examined were useful for analysis. By comparison of the characteristic bands of PCR products on agarose gel, it was possible to distinguish the 4 species. Thus, the botanical species of Aloe in commercial food products can be identified by RAPD analysis.     

Density and viscosity of tetralin and trans-decalin

New measurements are reported for the density and viscosity of tetralin and trans-decalin. The density was determined from room temperature to 60°C for tetralin and to 95°C for trans-decalin. The kinematic viscosity was measured up to temperatures slightly above 100°C. Our results improve upon the values recommended by the American Petroleum Institute for these liquids.