Rapid determination of the fracture toughness of metallic materials using circumferentially notched bars

Three types of material whose fracture toughness tests were previously performed by using circumferentially notched bars, namely (1) a dual-phase steel with three different morphologies; (2) an Al-Zn-Mg-Cu-wrought alloy; and (3) Al-Si-cast alloys with three different Si contents, were investigated in terms of accuracy and reliability of the testing method. Also, the advantages of using circumferentially notched bars for fracture toughness determination of metallic materials were discussed. With the help of stress concentration factors, which are associated with the bluntness of the notch, correction factors for the fracture toughness calculations are derived. The corrected fracture toughness values are found to be close to the uncorrected ones, implying that the testing procedure is reliable.     

A comparison of swarm-based optimization algorithms in linear antenna array synthesis

Today, the design of antenna arrays is very important in providing effective and efficient wireless communication. The purpose of antenna array synthesis is to obtain a radiation pattern with a low side lobe level (SLL) at a desired half power beam width in far-field. The amplitude and position values of the array elements can be optimized to obtain a radiation pattern with suppressed SLLs. In this paper, swarm-based metaheuristic algorithms including particle swarm optimization (PSO), artificial bee colony (ABC), mayfly algorithm (MA) and jellyfish search (JS) are compared to determine the optimal design of linear antenna arrays. Extensive experiments are conducted on designing 10-, 16-, 24- and 32-element linear arrays by determining the amplitude and positions. Experiments are repeated 30 times due to the random nature of swarm-based optimizers, and statistical results show that the performance of the novel algorithms, MA and JS, is better than that of the well-known PSO and ABC methods.

     

A variational approach to problems in calibration of multiple cameras

This paper addresses the problem of calibrating camera parameters using variational methods. One problem addressed is the severe lens distortion in low-cost cameras. For many computer vision algorithms aiming at reconstructing reliable representations of 3D scenes, the camera distortion effects will lead to inaccurate 3D reconstructions and geometrical measurements if not accounted for. A second problem is the color calibration problem caused by variations in camera responses that result in different color measurements and affects the algorithms that depend on these measurements. We also address the extrinsic camera calibration that estimates relative poses and orientations of multiple cameras in the system and the intrinsic camera calibration that estimates focal lengths and the skew parameters of the cameras. To address these calibration problems, we present multiview stereo techniques based on variational methods that utilize partial and ordinary differential equations. Our approach can also be considered as a coordinated refinement of camera calibration parameters. To reduce computational complexity of such algorithms, we utilize prior knowledge on the calibration object, making a piecewise smooth surface assumption, and evolve the pose, orientation, and scale parameters of such a 3D model object without requiring a 2D feature extraction from camera views. We derive the evolution equations for the distortion coefficients, the color calibration parameters, the extrinsic and intrinsic parameters of the cameras, and present experimental results.     

The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel

The influence of duplex surface treatments consisting of a DC-pulsed plasma nitriding process and subsequent coatings of CrN and TiAlN deposited by physical vapor deposition(PVD)on AISI H13 tool steel was studied in this article.The treated samples were characterized using metallographic techniques,SEM,EDS,and microhardness methods.Hydro-abrasive erosion wear tests were performed in a specifically designed wear tester in which the samples were rotated in a wear tank containing a mixture of distilled water and ceramic abrasive chips with a fixed rotational speed.The wear rates caused by the abrasive particle impacts were assessed based on accumulated weight loss measurements.The worn surfaces were also characterized using optical microscopy,SEM,and EDS.Microhardness measurements indicated a significant increase in the surface hardness of the duplex-treated samples.The surfaces of the samples with the TiAlN coating were approximately 15 times harder than that of the untreated samples and 3 times that of the plasma nitrided samples.Hydro-abrasive erosion wear results showed that the duplex surface treatments,especially the CrN coating,displayed the highest erosion wear resistance.     

The effect of atmospheric plasma treatment of recycled carbon fiber at different plasma powers on recycled carbon fiber and its polypropylene composites

To increase the mechanical properties of recycled carbon fiber-reinforced polypropylene (PP) composites, recycled carbon fibers (RCF) were subjected to atmospheric plasma treatment at different plasma powers (100, 200, and 300 W). The changes on surface topography and roughness of RCF were examined by atomic force microscopy. Plasma treatment of RCF increased the roughness value of RCF. The variation of surface elemental compositions and tensile strength of RCF were determined by using X-ray photoelectron spectroscopy and tensile test, respectively. Plasma-treated RCF-reinforced PP composites were fabricated using high speed thermo-kinetic mixer. Plasma treatment of RCF at 100 W increased the tensile and flexural strength values of RCF-reinforced PP composites considerably by 17 and 11%, respectively. However, plasma treatment of RCF at higher plasma powers (200 W and 300 W) decreased tensile and flexural strength values of composites because of the etching of RCF. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47131.     

Microbial profile and bacterial characterisation of naturally debittered Hurma olives compared to non‐debittered Erkence variety during ripening period

Naturally debittered Hurma olive is grown in a specific area in Karaburun peninsula in Turkey. It is characterised by its sweet taste and it differs from other varieties by losing its bitterness caused by phenolic compounds during its maturation period on the tree. Therefore, Hurma olive does not require any further debittering process to be served as table olive. This study was particularly interested in the comparison of the microbial profile of Hurma olive during its 8 weeks of maturation period in two subsequent harvest years and Erkence (not naturally debittered) olive. In addition, main bacterial profile of both Hurma and Erkence olives were isolated and identified. Aerobic mesophilic microorganism (AMM), lactic acid bacteria (LAB), Enterobacteriaceae, Pseudomonadaceae, Staphylococci, Micrococcaceae, yeasts and moulds (Y&Ms) were detected (counted and isolated) in the olive drupes during the maturation period. Isolated bacteria were identified as different spp. of Bacillaceae, Enterobacteriaceae, Micrococcoceae and Pseudomonadaceae.     

Synthesis and Characterization of PEG-Sr Hexaferrite by Sol–Gel Conversion

Sr-M-type hexagonal ferrites have been prepared via a sol?Cgel route, and the effects of addition of different molecular weight polyethylene glycol (PEG) into the sol solutions on the static magnetic properties and particle morphology have been studied. Crystalline phases of the samples were determined by XRD analysis. FT-IR and TG analyses were used to prove the presence of PEG on SrFe₁₂O₁₉. The results showed that adding PEG with different molecular weight into the sol solutions affected the formation mechanism of SrFe₁₂O₁₉. Sr-M precursors prepared by various PEG types show different magnetic behaviors after pre-calcination at 150?^°C. This discrepancy is explained by the formation of a different phase during the synthesis of SrM particles.     

Synthesis and application of phenylcarbamodithioate compound for steel protection

Phenyldithiocarbamate compound has been synthesized and studied as corrosion inhibitor for steel. Dithiocarbamate (DTC) compounds with linear alkyl groups are good inhibitors, but their stability is quite low in acidic solutions. It should be noted that long-term stability is important for practical applications, in order to avoid excess use of chemicals. So, we have synthesized phenyl substituted DTC which offers strong inhibition efficiency and extra stability. This new inhibitor is chemically adsorbed on steel through its DTC group, while the aromatic ring provides extra stability and long-term efficiency. For the assessment of corrosion kinetics, we have utilized potentiodynamic and ac impedance studies; also solution assay analysis was realized with atomic absorption spectroscopy. It was revealed that inhibitor exhibits remarkably high efficiency, even under elevated temperature conditions. At 55 °C temperature conditions, i_corr value decreased from 5050 to 154 μA cm^?2, with the addition of 500 ppm inhibitor. The long-term stability of inhibitor was also tested and 85.93% efficiency was obtained after three days of exposure period for 500 ppm concentration.