Functional Coupling of Slack Channels and P2X3 Receptors Contributes to Neuropathic Pain Processing

The sodium-activated potassium channel Slack (K_Na1.1, Slo2.2, or Kcnt1) is highly expressed in populations of sensory neurons, where it mediates the sodium-activated potassium current (I_KNa) and modulates neuronal activity. Previous studies suggest that Slack is involved in the processing of neuropathic pain. However, mechanisms underlying the regulation of Slack activity in this context are poorly understood. Using whole-cell patch-clamp recordings we found that Slack-mediated I_KNa in sensory neurons of mice is reduced after peripheral nerve injury, thereby contributing to neuropathic pain hypersensitivity. Interestingly, Slack is closely associated with ATP-sensitive P2X3 receptors in a population of sensory neurons. In vitro experiments revealed that Slack-mediated I_KNa may be bidirectionally modulated in response to P2X3 activation. Moreover, mice lacking Slack show altered nocifensive responses to P2X3 stimulation. Our study identifies P2X3/Slack signaling as a mechanism contributing to hypersensitivity after peripheral nerve injury and proposes a potential novel strategy for treatment of neuropathic pain.     

Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Influence of microwave heating and time on functional,pasting and thermal properties of cassava starch

The effect microwaving power and time on the functional, pasting and thermal properties of cassava starch was investigated. Cassava starch at a moisture content of 30% was microwaved at 600 and 700 W for 0, 5, 15, 30 and 60 s following a preliminary study. Microwaving power and time did not alter the crystalline pattern of the starch, but there were obvious changes in the starch morphology. Starch colour was significantly (P ≤ 0.05) altered by microwave heating, with the total colour difference increasing from 4.85 to 43.01. Microwave treatment increased starch gelatinisation temperatures but decreased the swelling power, water absorption capacity and the relative crystallinity. These changes were influenced by microwave heating power and time. The results further revealed that the peak viscosity (3714.00–1947.00 cP) and setback ratio (1.70–1.49) decreased with increasing microwave heating time. However, breakdown viscosity (322.67–897.63 cP) and pasting temperature (1947.00–3714.00 °C) increased.     

Developing conductive immiscible polystyrene/polypropylene blends with a percolated conducting polyaniline/polyamide filler by tuning its specific interactions with the styrene-based triblock compatibilizer grafted with maleic anhydride

An approach to induce conductivity in immiscible polystyrene/polypropylene (PS/PP) blends is described using a percolated conducting polyaniline/polyamide (PANI/PA) filler combined with a polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene-graft-maleic anhydride compatibilizer. The approach is based on the ability of the compatibilizer to concomitantly stabilize the cocontinuous morphology and to improve the state of dispersion of the PANI/PA filler. Selective localization of PANI/PA in the PS phase with improved filler dispersion is achieved with the optimal master batch (MB) preparation technique followed by its optimized sequence addition to the blend components. This results in an increase in the dc conductivity by six decades as compared with that of the neat compatibilized blend at an effective 4.8-wt % PANI concentration. An investigation of the effect of functionality and concentration of the filler and the compatibilizer on the filler connectivity in the blend is performed. The prevailing specific interactions are analyzed by Fourier transform infrared spectroscopy and thermogravimetric analysis of the MBs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48433.     

Strength assessment of Al2O3 and MgAl2O4 using micro- and macro-scale biaxial tests

Journal of Materials Science - The application of ceramics in advanced functional applications often requires thicknesses below a few hundred micrometers, rendering an assessment of the...     

Improving the performances of earth air heat exchangers through Constructal design

Earth to air heat exchanger (EAHE) is a well‐known technique used to preheat or precool outdoor air before blowing it into a building. However, its geometry is often very simple as it consists in one or multiple straight pipes, while more complex arrangements can be found in heat exchangers design. In this paper, we explore the advantage of designing an EAHE as a network through the Constructal law point of view. A methodology is first proposed to design a single pipe EAHE when the need is defined in terms of cooling power, overall efficiency and enthalpy difference between the inlet air and the ground. Next, the single pipe EAHE is used as a reference for designing a tree‐shaped network under the constraint of identical fluid volume and cooling power. The geometrical features are allowed to change for the different branches of the network. The network coefficient of performance is found to increase significantly with the bifurcation level, illustrating the superior performances of the network. This approach was found to be robust as the improvements were not depending on the cooling demand or the environmental conditions. However, further work is needed to move from this theoretical result to practical considerations.     

Morphological description of the immature stages of Hermetia illucens (Linnaeus, 1758) (Diptera: Stratiomyidae)

In the dipteran genus Hermetia, only 6 of the 78 valid species have documented immature stages: H. albitarsis Fabricius, 1805, H. aurata Bellardi, 1859, H. concinna Williston, 1900, H. illucens (Linnaeus, 1758), H. panamensis Greene, 1940 and H. pulchra Weidemann, 1830. In particular, H. illucens stands out due to its reported applicability for forensic, medical and economic purposes. Here, we described the morphology of eggs and immature stages of this species, with a view to detecting differences between instars and in the pupal stage, which should eventually help properly identifying larval age. We utilized both optical and scanning electron microscopy tools. The eggs are elliptical and elongated, and color varies from cream white to yellowish. The larvae are apodal, hemichephalic and holopneustic, flattened dorso‐ventrally and may be recognized by the head elongated, dorsal and ventral chaetotaxy of the cephalic capsule, thoracic and abdominal segments, and the morphology of the anterior and posterior spiracles. The pupae are adecticous and coarctate, tegument dark brown and pruinescence varying from brown to golden. The overall morphology across instars is similar, but marked variations were observed in the shape of the antennal articuli and the shape of the setae (first instar compared to the others). Our results supplement the biological information on Hermetia illucens and should aid the proper identification and aging of juveniles in the field, as a way to minimize errors in the calculation of the post‐mortem interval.     

Fracture behavior of solid electrolyte LATP material based on micro-pillar splitting method

The NASICON type solid electrolyte LATP is a promising candidate for all-solid-state Li-ion batteries considering energy density and safety aspects. To ensure the performance and reliability of batteries, crack initiation and propagation within the electrolyte need to be suppressed, which requires knowledge of the fracture characteristics. In the current work, micro-pillar splitting was applied to determine the fracture toughness of LATP material for different grain orientations. The results are compared with data obtained using a conventional Vickers indentation fracture (VIF) approach. The fracture toughness obtained via micro-pillar splitting test is 0.89 ± 0.13 MPa?m^1/2, which is comparable to the VIF result, and grain orientation has no significant effect on the intrinsic fracture toughness. Being a brittle ceramic material, the effect of pre-existing defects on the toughness needs to be considered.