Dynamic mechanical properties of three‐component composites (acrylic polymer/epoxy/SiO2) in the glass‐transition region

In previous studies, we reported the linear and nonlinear rheological properties of three‐component composites consisting of acrylic polymer (AP), epoxy resin (EP), and various SiO₂ contents (AP/EP/SiO₂) in the molten state. In this study, the dynamic mechanical properties of AP/EP/SiO₂ composites with different particle sizes (0.5 and 8 μm) were investigated in the glass‐transition region. The EP consisted of three kinds of EP components. The α relaxation due to the glass transition shifted to a higher temperature with an increase in the volume fraction (?) for the AP/EP/SiO₂ composites having a particle size of 0.5 μm, but the α relaxation scarcely shifted for the composite having a particle size of 8 μm as a general result. This result suggested that the SiO₂ nanoparticles that were 0.5 μm in size adsorbed a lot of the low‐glass‐transition‐temperature (T_g) component because of their large surface area. The AP/SiO₂ composites did not exhibit a shift in T_g; this indicated that the composite did not adsorb any component. The modulus in the glassy state (E′_g) exhibited a very weak &phis; dependence for the AP/EP/SiO₂ composites having particle sizes of 0.5 and 8 μm, although E′_g of the AP/SiO₂ composites increased with &phis;. The AP/EP/SiO₂ composites exhibited a peculiar dynamic mechanical behavior, although the AP/SiO₂ composites showed the behavior of general two‐component composites. Scanning electron microscopic observations indicated that some components in the EP were adsorbed on the surface of the SiO₂ particles. We concluded that the peculiar behavior of the AP/EP/SiO₂ composites was due to the selective adsorption of the EP component. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40409.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

Development of Motor Model of Rotor Slot Harmonics for Speed Sensorless Control of Induction Motor

This paper proposes a novel mathematical dynamic model to represent the steady‐state and transient‐state characteristics of rotor slot harmonics of an induction motor for sensorless control. Although it is well known that the rotor slot harmonics originate from the mechanical structure of the induction motor, a mathematical model that describes the relationship between the stator/rotor currents of the induction motor and the slot harmonics has not yet been proposed. Therefore, in this paper, a three‐phase model of the induction motor that depicts the rotor slot harmonics is developed by taking into consideration the magnetomotive force harmonics and the change in the magnetic air gap caused by the rotor slots. The validity of the proposed model is verified by comparing the experimental results and the calculated values. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 63–74, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22478     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Evaluating a behavioral demand response trial in Japan: evidence from the summer of 2013

This paper presents results from a behavioral demand response trial targeted to both grid and residential peak hours, in which weekly feedback via paper-based reports, real-time feedback via an in-home display, 30-minute tiered rate, and email prompts are adopted to almost 230 residential customers of a condominium in Funabashi, a city located in Greater Tokyo. Through a randomized experiment, we find that the peak saving impact during grid peak hours (1–4 pm, weekdays only) was 11.6 %, given that all the four interventions provided all at once. In addition, the results show that the variation in peak saving effects by household characteristics exists, and the variation differs among packages of peak saving interventions. Furthermore, we analyzed how much informational elements in weekly reports are considered as useful by residential customers. These results suggest that feedback-based approaches for peak saving can promote households’ energy conservation behavior.     

Vinyl ester/clay based nanocomposites: a complementary study of vinyl ester polymerization by hyphenated rheo‐Fourier transform infrared and separate rheology/Fourier transform infrared measurements

This work is focused on the complementary information obtained from advanced in situ Fourier transform infrared (FTIR) spectroscopy and rheological measurements to correlate the structural changes with rheological properties upon polymerization of different organically modified montmorillonite clay/vinyl ester composites prepared by in situ polymerization. The microstructure and morphology of the nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The effect exerted by the presence of organic clay on the polymerization reaction of a vinyl ester based polymer matrix was evaluated. In situ and ex situ rheo‐FTIR measurements were compared to demonstrate the accuracy of this technique. © 2013 Society of Chemical Industry