基于超混沌双向认证的医院财务信息安全加密系统设计

由于医院财务信息中需要加密的数据较多,在信息加密过程中常出现系统稳定性差的r问题,为此将超混沌双向认证方法应用到医院财务信息安全加密系统设计中.实验证明,所设计的基于超混沌双向认证的医院财务信息安全加密系统比传统系统稳定性强.     

Effect of laser power density on the electrochromic properties of WO3 films obtained by pulsed laser deposition

Pulsed laser deposition (PLD) was used to prepare tungsten trioxide (WO₃) films on ITO substrates with a varying laser power density of 4.0–5.5 W/cm². XPS indicated that when the laser power density decreased, the peak positions of the W 4f and O 1s orbits shifted slightly to low energy due to the difference in oxygen vacancies. As the laser power density decreased, W⁶⁺ gradually replaced the lattice position of O^2?, increasing oxygen vacancies in the lattice. The transmittance modulated values (ΔT) were over 44% at 830 nm, indicating strong absorption by the WO₃ thin films in the near-infrared ray. The switching time of the WO₃ thin films between bleached states and coloured states decreased as the laser power density increased due to the amorphous structure, morphology, and lower oxygen deficiency at a high power density. The high ΔT and very fast switching time of t_b (1.09 s) and t_c (6.01 s) demonstrated the excellent electrochromic (EC) properties of the WO₃ films prepared by PLD.     

2种侧围加强内框总成检具结构对比分析

概述了侧围加强内框总成与周边零件的匹配关系,从检具操作的人机工程出发,描述了侧围加强内框总成检具的2种定位方式和结构设计,对比了2种定位方式对于检测结果的影响,总结了其优点和弊端,结果表明侧围加强内框总成检具采用车内方向朝下的定位方式效果更好。     

基于光刀图像的机器人示教纠偏方法

为了解决机器人辅助在线检测系统示教过程中效率低、人为干预多的问题,针对孔类特征,提出一种通过处理光刀图像获取机器人位姿纠正参数的方法。在该方法中,纠偏过程按照将图像光刀线调整为水平方向、将被测特征调整至图像中央、根据不同特征调整最优扫描方向3个步骤进行。根据光刀图像可以求出测量坐标系与被测特征的位姿关系,并得到该位姿与理想测量位姿的偏差。经过坐标变换即可得到在机器人基坐标系下的调整参数。另外,可利用电脑控制机器人运动,从而实现了纠偏过程的自动化。实验结果表明,该方法可将初始的示教位姿修正为理想位姿,且比传统方式效率更高。     

Constructing magnetically recoverable CdS/CaFe2O4 P–N heterojunctions for enhanced photoelectrochemical properties towards H2 evolution reaction

A novel CdS/CaFe₂O₄ (CS/CFO) heterogeneous p-n junction was created by thermal deposition of CaFe₂O₄ nanoparticles on CdS rods. The CS/CFO hetero-structured photocatalysts exhibited increasingly efficient visible light harvesting compared to the bare CdS. The CS/CFO composites also presented higher photocurrent and slower decay of photoluminescence, suggesting a better separation of the photo-generated electrons and holes. The photocatalytic H₂ evolution quantity on the optimized CS/CFO composite from water in the presence of ethanol was up to 2200 μmol after 3-h visible light illumination, which is more than twice that of the pristine CdS. The chemical interaction between CdS and CaFe₂O₄ was confirmed by the shifts in the XPS peaks, which made it possible for the charge carriers to transfer across the p-n junction interface. This research highlights the importance of forming an interfacial p-n heterojunction between two semiconductors for efficient charge separation and improved photocatalytic performance.     

基于GA-BP的汽车风振噪声声品质预测模型

目前对于汽车风振噪声的优化研究主要以声压级（Sound pressure level，SPL）作为单一评价指标，既不能全面反映噪声的物理属性，也无法考虑人耳对噪声的主观认知过程。为准确评价风振噪声，引入声品质，运用大涡模拟（Large eddy simulation，LES）对风振噪声进行数值仿真，根据实车道路试验判断仿真的准确性；对仿真结果进行声品质客观评价与主观评价，综合声品质客观评价参数与声品质主观评价试验结果建立BP神经网络预测模型；利用遗传算法（Genetic algorithm，GA），进一步对BP神经网络的结构参数进行优化，建立GA-BP声品质预测模型。研究结果表明，GA-BP声品质预测模型在训练速度和预测精度上都优于BP神经网络预测模型。预测模型基于声品质主客观评价结果，其预测值可以代替传统的声压级评价指标，为风振噪声提供更为准确合理的评价。     

Effects of (Li0.5Sm0.5)/W co-substitution and sintering temperature on the structure and electrical properties of ultrahigh Curie temperature piezoceramics,Ca0.92(Li0.5Sm0.5)0.08Bi2Nb2-xWxO9

With co-substitution of (Li_0.5Sm_0.5) at A site and W at B site, the electrical properties of modified Ca_0.92(Li_0.5Sm_0.5)_0.08Bi₂Nb_2-xW_xO₉ [(CLS)BN-xW, x = 0, 0.015 and 0.03] piezoceramics with ultrahigh Curie temperature (T_C) of > 930 °C were enhanced dramatically. The increased resistivity induced by the co-substitution ensure them to be polarized under an enough high field. Combined with the increase of spontaneous ferroelectric polarization (P_S), the significant enhancements in the piezoelectric, dielectric and ferroelectric properties can be obtained in the composition x = 0.015. Furthermore, the piezoelectric activity (d₃₃) and bulk resistivity (ρ_b) of (CLS)BN-0.015 W can be further enhanced at an appropriate sintering temperature. This optimum composition sintered at 1170 °C shows ultrahigh T_C of ～948 °C, d₃₃ of ～17.3 pC/N and ρ_b of ～6.9 MΩ cm at 600 °C, which are comparable to those of the reported high-temperature Aurivillius piezoceramics with T_C > 850 °C.     

某特钢工业厂房办公楼结构设计

特钢工业厂房办公楼由2栋长90.6 m、宽34.2 m、高36.5 m的塔楼组成,两个塔楼之间2层设置钢平台,一端铰接,一端滑移.通过方案比选,两塔楼均采用钢框架(局部设支撑)结构体系,标准轴网为8.4 m×9.0m,结构布置基本对称,相邻处端部一跨存在斜柱.针对斜柱对结构的不利影响,对结构进行了 pushover分析,并采取了相应的措施;2层的钢平台跨度较大,进而做了舒适度分析,结果表明,满足规范的要求.     

Effects of ultrafiltration combined with high-pressure processing,ultrasound and heat treatments on the quality of a blueberry–grape–pineapple–cantaloupe juice blend

This study investigated the effect of ultrafiltration (UF) combined with high-pressure processing (HPP) at 550 MPa, 25 °C for 5 min, ultrasound (US) at 520 W, 40 °C for 10 min and heat treatment (HT) at 90 °C for 3 min on the microbial, physicochemical and sensory properties of a blueberry–grape–pineapple–cantaloupe juice blend during 104 days of storage at 4 °C. After UF, the shelf life of the HPP- and US-treated clear juice blends were 104 and 72 days during the storage at 4 °C respectively. HPP, US and HT treatment minimally affected the anthocyanin and total phenol contents, while HPP better maintained the ascorbic acid levels and sensory properties in the clear juice blend during the storage. Therefore, HPP combined with UF was identified as a prospective processing technique in the fruit juice industry.