Samarium Ion-Doped Maghemite Nanoparticles: Synthesis,Microstructural, Optical,and Magnetic Characterizations

Journal of Superconductivity and Novel Magnetism - This paper reports the effects of rare-earth Sm3+ ion substitution on structural, optical, electronic, and magnetic responses of maghemite...     

Real-Time Ultrasonic Monitoring of the Vulcanization Process in Nitrile Rubbers

Russian Journal of Nondestructive Testing - Nitrile rubbers, also known as Nitrile-Butadiene rubbers, belong to the category of synthetic rubbers and are a better choice as materials for...     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

Isolation and identification of phosphate‐solubilizing microorganisms and distribution of orthophosphate in different seasons from sewage‐fed East Kolkata Wetland

This study focused on isolation and identification of possible phosphate‐solubilizing bacteria (PSB ) from the sewage‐fed East Kolkata Wetland (EKWL ), a prospective water resource for pisciculture. In addition, different limnological parameters have been correlated with orthophosphate and seasonal variations. PSB have been isolated in Pikovskaya medium and identified morphologically and biochemically and finally analysed by 16S rDNA gene sequence. Limnological studies involving temperature (potentiometric), pH (potentiometric), dissolved oxygen (iodometric), ammonia‐nitrogen (spectrophotometric) and orthophosphate (spectrophotometric) concentrations were conducted. The results of this study established the presence of Bacillus megaterium , a potential PSB in EKWL . The activity of B. megaterium is also supported by the seasonal orthophosphate variations. The changes in concentration of other limnological parameters were also prominent. The water quality parameters of temperature (r  = 0.886), dissolved oxygen (r  = 0.729) and ammonia‐nitrogen (r  = 0.396) concentrations exhibited a positive correlation with orthophosphate and a negative correlation with pH (r  = ?0.699). The B. megaterium obtained in this study, exhibited a significant alteration in regard to orthophosphate content and relationships with other factors. Further experiment on the soluble phosphorus solubilization potential of B. megaterium revealed the biological availability of phosphorus was increased by threefold after 120 hr of incubation, with the decreasing pH value, although the phytase activity was 0.419 U/ml. PSB have a vital function in plant nutrition in supplying phosphate, essential nutrients and its uptake results in appropriate functioning and metabolism of different aquatic plants and organisms. PSB are competent biofertilizer to amplify aquaculture production for sustainable development.     

Iron-Doped,Mullite-Impregnated PVDF Composite: An Alternative Separator for a High Charge Storage Ceramic Capacitor

In this communication, the formation mechanism of the electroactive β phase, morphology and the dielectric activities of increasing doping concentration (0–1.2 M.W % of mullite) of Fe²⁺ ion-doped, mullite-impregnated polyvinylidene fluoride (PVDF) nanocomposite have been investigated. Differential thermal analysis (DTA) confirms the formation of an electroactive β phase, and Fourier transform infrared spectroscopy (FTIR) showed that the β phase increases simultaneously and attains the maximum increment of 2.6 times compared to pristine PVDF. X-ray diffraction (XRD) spectra also agreed well with the β-phase increment behaviour and also confirmed the presence of required mullite phases. Field emission scanning electron microscopy (FESEM) images indicate the strong interaction between the polymer matrix and different concentrations of Fe²⁺ ion-doped mullite particles, resulting in enhanced electroactive β phase formation and large dielectric constant of the nanocomposite films followed by significant low dielectric loss with high ac conductivity compared to pristine PVDF films at room temperature. This doped polymer composite can be used as a high dielectric separator and, using this separator, we have successfully fabricated a high-charge-storage device. This paper also demonstrates that the loading of conductive Fe²⁺ ions within the highly insulating mullite matrix has a critical concentration for the enhancement and nucleation of the electroactive β phase of the PVDF polymer. In this critical concentration, the highest formation of a β network and maximum numbers of homogeneously distributed iron-doped mullite (FeM) particles in PVDF matrix improves the effective interfacial polarization by Maxwell–Wagner–Sillar (MWS) polarization effect which is responsible for the enhancement of dielectric constant and ac conductivity followed by significant tangent loss. So, it can be concluded that the incorporation of Fe²⁺-doped mullite into PVDF matrix is an effective way to fabricate a high dielectric separator of high-charge-storage electronic devices.     

Guayule natural rubber composites: impact of fillers on their cure characteristics,dynamic and mechanical behavior

Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.