Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties

Metal/ceramic composites are in high demand in several industries because of their superior thermo-mechanical properties. Among various composite types, the interpenetrating phase composites (IPCs) with percolating metallic and ceramic phases offer manifold benefits, such as a good combination of strength, toughness, and stiffness, very good thermal properties, excellent wear resistance, as well as the flexibility of microstructure and processing route selection, etc. The fabrication of metal/ceramic IPCs typically involves two steps - i) processing of an open porous ceramic body, and ii) infiltration of metallic melt in the pores to fabricate the IPC. Although significant progress has been made in recent years for developing both porous ceramics and melt infiltration methods, to the best of the knowledge of the authors, no review article summarizing all the aspects of processing and properties of IPCs has been published till date. This review article is aimed at filling this gap. Starting with a brief introduction about the current status and applications of IPCs, the various processing routes for fabricating open porous ceramic preforms and melt infiltration techniques have been discussed. Subsequently, the data available for various important physical, mechanical, and thermal properties for IPCs have been critically analyzed to thoroughly understand their dependence on various structural and processing parameters. To compare the properties of IPCs with other relevant materials, seven different Ashby material property maps have been used, and the domains for IPCs have been created in them. For each map, the concept of material indices has been employed to critically discuss how IPCs perform in relation to other material classes for various optimum design conditions. Finally, a detailed future outlook for further research on IPCs has been provided.     

Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

Excellent destabilization effect and ideal desorption temperature in the hydride Mg2FeH6 substituted with yttrium; a first principles study

We investigated some properties of the hydride Mg₂FeH₆ substituted with yttrium by a first principles calculation. Some experimental results showed that 4d transition metal, yttrium serves as a good catalyst for magnesium based hydrogen storage alloys, but there are a few theoretical studies about magnesium based hydrides substituted with it. Mg₂FeH₆ is regarded as a cheaper material than pure MgH₂, while it is crystalized into Fm3m structure (space group 225). Although it has high hydrogen storage capacity, many investigations have not been devoted to it due to its extremely high thermodynamic stability. The yttrium substituted Mg₂FeH₆ exhibits very low energy of formation, and its desorption temperature, 75 °C is very suitable for practical hydrogen storage applications. Our results showed that Mg₂FeH₆ is destabilized effectively by yttrium substitution and introducing vacancy defects has additive effect to the improvement of dehydrogenation performance.     

Fox Hunting in Wild Apples: Searching for Novel Genes in Malus Sieversii

Malus sieversii is considered the progenitor of modern apple (Malus pumila) cultivars and to represent a valuable source of genetic diversity. Despite the importance of M. sieversii as a source of disease resistance, stress tolerance, and novel fruit traits, little is known about gene function and diversity in M. sieversii. Notably, a publicly annotated genome sequence for this species is not available. In the current study, the FOX (Full-length cDNA OvereXpressing) gene hunting system was used to construct a library of transgenic lines of Arabidopsis in which each transgenic line overexpresses a full-length gene obtained from a cDNA library of the PI619283 accession of M. sieversii. The cDNA library was constructed from mRNA obtained from bark tissues collected in late fall–early winter, a time at which many abiotic stress-adaptative genes are expressed. Over 4000 apple FOX Arabidopsis lines have been established from the pool of transgenic seeds and cDNA inserts corresponding to various Gene Ontology (GO) categories have been identified. A total of 160 inserts appear to be novel, with no or limited homology to M. pumila, Arabidopsis, or poplar. Over 1300 lines have also been screened for freezing resistance. The constructed library of transgenic lines provides a valuable genetic resource for exploring gene function and diversity in Malus sieversii. Notably, no such library of t-DNA lines currently exists for any Malus species.     

A review on China's wind power accommodation in the background of “Internet+” strategy

The consumption of fossil fuel has resulted in global warming, environmental pollution, and many other crucial problems. Replacing fossil fuel with renewable energy has become an important issue over the recent decades. As a renewable clean energy, wind power is a relatively well‐developed and promising energy method for current technology development in China. Under the background of growing demand for electricity and enhancing awareness for environmental, the “Internet+ wind power” concept has emerged based on both the wind power's characteristics that renewable and non‐polluting, and the rapid development of the Internet in China. Through querying an amount of literature and information, this paper reveals the resource endowment and policy environment about wind power and energy Internet at first. Then, the PEST‐SWOT strategy analysis model is used to analyze the internalities (strengths and weaknesses) and the externalities (opportunities and threats) of “Internet+ wind power”. According to these results, the paper puts forward some measures (development and utilization, business mode) for wind power accommodation. Then some policy recommendations have been proposed. The government should provide favorable conditions for wind power grid with the “Internet+” technology innovation.     

12000t/d水泥熟料生产线三次风管的优化改造*

水泥熟料生产过程中三次风管对分解炉和回转窑等热工设备的稳定运行起着重要作用。三次风管的用风和通风合理性,直接影响分解炉内煤粉的燃烧、碳酸盐在分解炉内的分解,间接影响回转窑内通风量和熟料在窑内的烧结。本文通过热工标定分析W工厂12000t/d水泥熟料生产线三次风管存在的问题,通过数据计算和对比分析,提出三次风管优化改造方案。     

Associations between evaporative cooling and dust‐mite allergens,endotoxins, and β‐(1 → 3)‐d‐glucans in house dust: A study of low‐income homes

Recent work suggests that evaporative coolers increase the level and diversity of bioaerosols, but this association remains understudied in low‐income homes. We conducted a cross‐sectional study of metropolitan, low‐income homes in Utah with evaporative coolers (n = 20) and central air conditioners (n = 28). Dust samples (N = 147) were collected from four locations in each home and analyzed for dust‐mite allergens Der p1 and Der f1, endotoxins, and β‐(1 → 3)‐d ‐glucans. In all sample locations combined, Der p1 or Der f1 was significantly higher in evaporative cooler versus central air conditioning homes (OR = 2.29, 95% CI = 1.05‐4.98). Endotoxin concentration was significantly higher in evaporative cooler versus central air conditioning homes in furniture (geometric mean (GM) = 8.05 vs 2.85 EU/mg, P < .01) and all samples combined (GM = 3.60 vs 1.29 EU/mg, P = .03). β‐(1 → 3)‐d ‐glucan concentration and surface loads were significantly higher in evaporative cooler versus central air conditioning homes in all four sample locations and all samples combined (P < .01). Our study suggests that low‐income, evaporative cooled homes have higher levels of immunologically important bioaerosols than central air‐conditioned homes in dry climates, warranting studies on health implications and other exposed populations.     

膨润土在涂料中的应用性能研究

膨润土在涂料工业中有非常广泛的应用,如可作为涂料的增稠剂、悬浮防沉降剂、辅助粘结剂等。本文对膨润土在其中的应用机理以及对涂料性能的影响作了探讨,并在此基础上分析了膨润土在涂料中应用的优缺点。     

仿真三维模拟放矿方法研究

本文提出了一种基于离散元的三维微分矿岩颗粒模拟放矿方法以进行高精度模拟放矿试验并通过理论的阐述与科学的计算方式描述其可行性。它以传统电算随机模拟放矿试验法为基础，结合现先进计算能力，科学地计算、分配并生成此试验方法中的单元子格与颗粒，然后分配各种颗粒的属性；再根据放矿学基本原理通过程序计算出颗粒在模拟矿岩分布空间随放矿时间变化的分布形态，从而达到真实放矿模拟的效果而加以研究。其以矿岩颗粒状态随时间变化而变化并兼用受力分析的方式分析端底部放矿的实际情况对现今放矿分析与模拟具有极其重要的意义。     

An extension of ASM2d including pH calculation

This paper presents an extension of the Activated Sludge Model No. 2d (ASM2d) including a chemical model able to calculate the pH value in biological processes. The developed chemical model incorporates the complete set of chemical species affecting the pH value to ASM2d describing non-equilibrium biochemical processes. It considers the system formed by one aqueous phase, in which biochemical processes take place, and one gaseous phase, and is based on the assumptions of instantaneous chemical equilibrium under liquid phase and kinetically governed mass transport between the liquid and gas phase. The ASM2d enlargement comprises the addition of every component affecting the pH value and an ion-balance for the calculation of the pH value and the dissociation species. The significant pH variations observed in a sequencing batch reactor operated for enhanced biological phosphorus removal were used to verify the capability of the extended model for predicting the dynamics of pH jointly with concentrations of acetic acid and phosphate. A pH inhibition function for polyphosphate accumulating bacteria has also been included in the model to simulate the behaviour observed. Experimental data obtained in four different experiments (with different sludge retention time and influent phosphorus concentrations) were accurately reproduced.