2英寸GaAs快速热退火技术研究

为配合２０００门ＧａＡｓ超高速门阵列及ＧａＡｓ超高速分频器等２英寸ＧａＡｓ工艺技术研究，开展了２英寸ＧａＡｓ快速热退火技术研究。做出了阈值电压为０～０．２Ｖ，跨导大于１００ｍＳ／ｍｍ的Ｅ型ＧａＡｓＭＥＳＦＥＴ和夹断电压为－０．４～－０．６Ｖ，跨导大于１００ｍＳ／ｍｍ的低阈值Ｄ型ＧａＡｓＭＥＳＦＥＴ。     

2英寸GaAs快速热退火技术研究

为配合２０００门ＧａＡｓ超高速门列及ＧａＡｓ超高速分频器等２英寸ＧａＡｓ工艺技术研究，开展了２英寸ＧａＡｓ快速热退火技术研究，做出了阈值电压为０～０．２Ｖ，跨导大于１００ｍＳ／ｍｍ的Ｅ型ＧａＡｓＭＥＳＦＥＴ和夹断电压为－０．４～－０．６Ｖ，跨导大于１００ｍＳ／ｍｍ的低阈值Ｄ型ＧａＡｓＭＥＳＦＥＴ。     

P埋层技术研究

介绍了在Ｓｉ￣＋注入的ｎ－ＧａＡｓ沟道层下面用Ｂｅ￣＋或Ｍｇ￣＋注入以形成ｐ埋层。采用此方法做出了阈值电压０～０．２Ｖ，跨导大于１００ｍＳ／ｍｍ的Ｅ型ＧａＡｓＭＥＳＦＥＴ，也做出了夹断电压－０．４～－０．６Ｖ、跨导大于１００ｍＳ／ｍｍ的低阈值Ｄ型ＧａＡｓＭＥＳＦＥＴ。     

高温正向大电流下TiAl,TiptAu栅GaAsMESFET的栅退化机理 …

针对ＧａＡｓＭＥＳＦＥＴ在微波频率的应用中的射频过驱动导致高栅电流密度现象,设计了ＴｉＡｌ栅和ＴｉＰｔＡｕ栅ＧａＡｓ ＭＥＳＦＥＴ的高温正向大电流试验,通过对试验数据和试验样品的扫描电镜静态电压衬度像以及试验中的失效样品进行分析,确定了栅寄生并联电阻的经是导致器件的跨导ｇｍ、栅反向漏电流Ｉｓ、夹断电压Ｖｐ等特性退化,甚至导致器件烧毁失效的主要原因。     

半绝缘砷化镓的光淬灭对TSC的影响

实验研究了ＳＩ－ＧａＡｓ材料中的ＥＬ２能级光淬灭对ＴＳＣ谱的影响。ＥＬ２能级显著光淬灭后,ＴＳＣ谱发生了明显的变化。一些ＴＳＣ峰的高度明显降低甚至消失,在低温端ＴＳＣ谱出现一些新的峰。     

C波段16W内匹配GaAs功率MESFET

Ｃ波段１６Ｗ内匹配ＧａＡｓ功率ＭＥＳＦＥＴ傅炜（南京电子器件研究所，２１００１６）１９９３年１２月２日收到ＡＣ－Ｂａｎｄ１６ＷＩｎｔｅｒｎａｌｌｙＭａｔｃｈｅｄＰｏｗｅｒＧａＡｓＭＥＳＦＥＴ￥ＦｕＷｅｉ（ＮａｎｊｉｎｇＥｌｅｃｔｒｏｎｉｃＤｅｖｉｃｅ...     

高温正向大电流下TiAl、TiPtAu栅GaAs MESFET的栅退化机理及其对器件特性的影响

针对ＧａＡｓ ＭＥＳＦＥＴ在微波频率的应用中的射频过驱动导致高栅电流密度现象,设计了Ｔｉａｌ栅和ＴｉＰｔＡｕ栅ＧａＡｓ ＭＥＳＦＥＴ的高温正向大电流试验,通过对试验数据和试验样品的扫描电镜静态电压衬度像以及试验中的失效样品进行分析,确定了栅寄生并联电阻的退化是导致器件的跨导ｇｍ、栅反向漏电流Ｉｓ、夹断电压Ｖｐ等特性退化,甚至导致器件烧毁失效的主要原因。     

大信号设计GaAs MESFET功率合成

利用ＧａＡｓＭＥＳＦＥＴ功率特性的线性化模型，求出ＧａＡｓＭＥＳＦＥＴ近似最佳功率负载阻抗，为利用谐波平衡法计算提供初值。然后，使用自行研制的谐波平衡分析软件包，进行ＧａＡｓＭＥＳＦＥＴ大信号模型参数的提取和非线性电路模拟计算。将两只总栅宽为９．６ｍｍ的ＧａＡｓＭＥＳＦＥＴ管芯，利用内匹配功率合成技术，在Ｃ波段（５．５～５．８ＧＨＺ）制成１ｄＢ压缩功率大于８Ｗ，典型功率增益９ｄＢ的ＧａＡｓＭＥＳＦＥＴ内匹配功率管。     

新型GaAsD－MESFETDCFL单元电路

本文基于自举反馈原理提出了一种新型的全部电耗尽型ＧａＡｓＭＥＳＦＥＴ构成的单电源ＧａＡｓＭＥＳＦＥＴ直接耦合逻辑ＦＥＴ单元电路．该单元电路比已有的各种ＧａＡｓ数字集成电路单元电路有明显优点，是ＧａＡｓ数字集成电路领域有前景的新型逻辑单元电路．     

背栅效应对GaAsMESFETV_(th)均匀性的影响

研究了背栅效应对全平面选择离子注入自隔离ＧａＡｓＭＥＳＦＥＴ的阈值电压及其均匀性的影响．结果表明,背栅效应使ＧａＡｓＭＥＳＦＥＴ的阈值电压绝对值变小,均匀性变差．     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Nanoimprint Lithography -A Next Generation High Volume Lithography Technique

IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL…     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.     

Analysis of error performance on Turbo coded FDPIM

Due to variable symbol length of digital pulse interval modulation（DPIM）, it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation（FDPIM） method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.