共查询到20条相似文献,搜索用时 62 毫秒
1.
简单介绍了直9(Z9)飞机复杂的镁铝铸件主减机匣的结构特点;阐述了该铸件5#主体芯结构特点、工艺技术要求;对其冷芯盒设计中的射砂口、活块、冷铁、芯盒本体及其底框等主要结构和零件的优化设计、方案优选作了较详细的评述。以及引入了人体工效学、美学、黄金分割原理等理念来指导冷芯盒的设计.使其达到了既适(实)用又美观的效果。 相似文献
2.
介绍了直九飞机上使用的复杂镁铝铸件主减机匣的结构特点,阐述了该铸件外型砂芯结构特点及其工艺技术要求,对该外型自硬砂芯芯盒设计中的中心定位体、活块、起吊芯骨、外套框、内套框及其底座等主要结构和零件的优化设计、方案优选作了详细评述,并引入了人体工效学、美学、黄金分割原理等理念来指导该芯盒的设计,生产实践结果,达到了既适(实)用又美观的效果. 相似文献
3.
陈永龙 《中国铸造装备与技术》2012,(4):15-18
本文简单介绍了一种重型车用减速箱体铸铁件的结构特点,以及该铸件主体芯结构特点、工艺技术要求,并对其冷芯盒设计中的射砂口、侧开盒结构、芯盒本体及其底框等主要结构和零件的优化设计、方案优选作了较详细的评述。同时引入人类工效学、美学、黄金分割原理等理念来指导冷芯盒的设计,使其达到了既实用又美观的效果。 相似文献
4.
介绍了S1100、ZS1110缸体冷芯主体砂芯的设计方法,其关键是砂芯分型面要平整,凹凸结合槽要完整且配合要好;根据砂芯结构的特点,按水平射芯、下芯盒移出顶芯方案设计制造冷芯射芯机。结果显示:这种砂芯结构从降低制芯成本、提高生产效率、减轻铸件单重、提高铸件整体质量等方面取得了明显的综合经济效益。 相似文献
5.
某轴间分动箱本体铸件,材质为ZL104,采用砂型低压铸造工艺生产,粘砂缺陷较为严重,通过统计分析,发现铸件粘砂产生的原因主要有:型砂中再生砂含量偏高,砂型(芯)烘烤温度过高,芯盒结构不合理,未设置结壳阶段。降低型砂中再生砂含量和砂型(芯)烘烤温度,防止砂型(芯)开裂;合理设计模具结构,通过舂砂保证砂型(芯)的紧实度;增设结壳阶段等,对预防粘砂效果明显。 相似文献
6.
7.
8.
史鉴开 《中国铸造装备与技术》1990,(6)
一、计算公式众所周知,模样(芯盒)工作尺寸计算公式一般为: L_模=L_基(1 K)式中L_模—模样(芯盒)工作尺寸(mm); L_基—铸件基本尺寸(mm),铸件图上给定的尺寸,包括机械加工余量, 起模斜度及其它工艺余量; K—铸造收缩率(%)。模样、芯盒形成铸型、型芯,排除或基本排除系统误差,在正常生产条件下,其工作尺寸决定铸件尺寸。铸件尺寸误差呈或基本呈随 相似文献
9.
刘文川 《中国铸造装备与技术》2007,(6):32-34
简单介绍了航空镁铝铸件上常用的直浇道芯、细长实体芯、细长中空芯及微小砂芯的结构特点。重点阐述了直浇道芯的几种冷芯盒方案各自的特点,并对其进行了比较分析,提出了其优(化)选设计方案。简单评述了其它几类砂芯之适用的冷芯盒制芯工艺方案。 相似文献
10.
11.
12.
13.
扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性. 相似文献
14.
15.
论述了CAD技术中参数化设计的三种建模方法,重点介绍了基于特征的参数化建模原理。在此基础上,分析机械设计中的机构结构,归纳出其零件的几何特征构成。设计了机构CAD图形库,并提出了该图形库生成步骤和人机交互界面。 相似文献
16.
采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合. 相似文献
17.
18.
19.
C. Colinet 《Intermetallics》2003,11(11-12):1095
A large number of ab-initio calculations of energies of formation of intermetallic compounds have been performed in the last 15 years. The currently used methods are listed. The paper presents a review of the aluminium based compounds which have been studied. Comparisons of calculated and experimental enthalpies of formation are provided for aluminim-3d and-4d transition metal alloys at equiatomic composition. The modelling of the enthalpies of mixing of solid solutions based on a given lattice is described. 相似文献
20.
O. N. Vlasova N. N. Korneeva V. I. Eremenko O. Kh. Fatkullin N. M. Semenova S. N. Petrova D. D. Vaulin 《Metal Science and Heat Treatment》1991,33(12):924-931
Conclusions To provide a high level of mechanical properties in wrought blanks of cast ÉP741NP and ÉP962 alloys it is necessary to form controlled structures. A necklace-type structure formed in homogenizing isostatic treatment, subsequent thermomechanical working including alternation of the operations of deformation in the (+)-area and recrystallization anneals, and final heat treatment is preferable. The temperature conditions of all stages of thermomechanical working are strictly controlled, especially the final operation of deformation and heating for hardening. To eliminate hardening cracks and distortions it is necessary to use molten salts at t=600°C as quenchants. The use of multiple production operations makes it possible to significantly reduce the structural inhomogeneity related to inhertance of the original dendritic structure. However, the structure of the final semifinished product is nevertheless characterized by a difference in occurrence of the processes of polygonization and recrystallization between the former dendritic cells and the interdendritic spaces in deformation and heat treatment.To obtain structurally homogeneous blanks for gas turbine engine parts it is necessary to use basically new methods of remelting such as vacuum double electrode remelting and electron beam remelting with an intermediate vessel.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 25–29, December, 1991. 相似文献