细分曲面拟合的局部渐进插值方法

逼近型细分方法生成的细分曲面其品质要优于插值型细分方法生成的细分曲面.然而,逼近型细分方法生成的细分曲面不能插值于初始控制网格顶点.为使逼近型细分曲面具有插值能力,一般通过求解全局线性方程组,使其插值于网格顶点.当网格顶点较多时,求解线性方程组的计算量很大,因此,难以处理稠密网格.与此不同,在不直接求解线性方程组的情况下,渐进插值方法通过迭代调整控制网格顶点,最终达到插值的效果.渐进插值方法可以处理稠密的任意拓扑网格,生成插值于初始网格顶点的光滑细分曲面.并且经证明,逼近型细分曲面渐进插值具有局部性质,也就是迭代调整初始网格的若干控制顶点,且保持剩余顶点不变,最终生成的极限细分曲面仍插值于初始网格中被调整的那些顶点.这种局部渐进插值性质给形状控制带来了更多的灵活性,并且使得自适应拟合成为可能.实验结果验证了局部渐进插值的形状控制以及自适应拟合能力.     

一种大规模散乱数据自适应压缩与曲面重建方法

针对大规模散乱数据点云,提出了一种基于曲率与距离的三角网格抽样方法。算法既能保证所生成网格曲面中每个三角片具有较好的形状,又能较鲜明地刻画曲面的细节特征。同时还能将原先规模较大的点云压缩到事先可控的数量上,是一种简单高效的自适应压缩和曲面生成方法。     

曲率约束的隐式曲面三角网格化

提出一种有效的隐式曲面三角网格化算法。从隐式曲面上的一个种子点开始,生成网格的边界作为扩张多边形,且该多边形最小角对应的顶点为扩张点,计算从扩张点处欲生成的三角网格,为了防止新生成的三角网格和已经存在的三角网格重叠,要进行冲突检测。在隐式曲面三角网格化的过程中,扩张多边形是不断变化的,需要重复上述步骤,直至没有扩张多边形时结束。该算法分别应用于解析隐式曲面和变分隐式曲面的三角网格化。实验结果表明,该算法不需要重新网格化的步骤,生成的三角网格具有较高的质量,且三角网格随曲率适应性变化,因此说明了该算法的有效性。     

对流扩散方程的间断Galerkin自适应方法

本文给出求解二维非线性对流扩散方程的局部间断Galerkin有限元方法在非协调三角网格上的自适应算法实现.数值算例表明这种方法可以高效追踪真解的剧烈变化.     

基于球填充法的STL模型曲面自适应网格生成方法

为满足有限元分析的需要,针对STL模型提出一种基于球填充法的自适应网格生成方法.首先识别STL模型的线曲率、面曲率和区域形状特征;其次采用八叉树做背景网格来建立尺寸场信息;最后,利用球填充算法在STL曲面生成自适应网格.文中方法不需要点面投影、前沿判交等复杂计算,能高效地生成STL曲面自适应网格.数值实验结果表明,该方法比NetGen速度更快,产生的自适应网格质量更优.     

几何自适应参数曲面网格生成

为满足有限元分析的需要,针对参数曲面提出一种几何自适应的网格生成方法.通过黎曼度量控制下的曲面约束Delaunay三角化获得曲面中轴,将其用于自动识别曲面邻近特征,并通过曲率计算自动识别曲率特征;根据邻近特征和曲率特征,融合传统网格尺寸控制技术控制边界曲线离散,并创建密度场;结合映射法和前沿推进技术对组合参数曲面生成几何自适应的网格.实验结果表明,该方法能够处理复杂的几何外形,生成的网格具有很好的自适应效果和质量.     

壳空间剖分的隐式曲面三角化

提出了一种曲率自适应的壳空间剖分隐式曲面三角形化新方法.新方法首先采用粒子系统对隐式曲面进行采样,通过高斯曲率约束粒子的生成,使生成的网格模型在曲率大的区域具有较多的小三角形,在曲率小的区域具有较少的大三角形,从而使网格模型更好地逼近隐式曲面.新方法在每个采样粒子处沿曲面法线正负方向延伸适当距离得到两个附加点,对所有附加点进行四面体化形成对隐式曲面逼近的壳空间四面体网格,在每个壳空间四面体中抽取三角形,所有抽取的三角形拼合得到隐式曲面的三角网格表示.与以往方法相比,新的三角网格化方法更具有鲁棒性,可一次性获得高质量的三角形网格.最后给出了对常用隐式曲面进行三角化的实例比较,显示了新方法的有效性.     

高亏格曲面共形参数化方法

共形映射又称为保角映射,在计算机图形学、几何信息处理和参数化领域扮演着重要角色.调和映射易于计算并且有严密的理论基础,为了计算高亏格曲面的共形映射,提出一种基于调和映射的非线性扩散方法.首先使用贪心算法在高亏格曲面上找到一个同伦群基底;然后通过求解一个线性系统来计算曲面的调和映射,将该映射的结果作为非线性扩散计算的初始条件;再使用拉普拉斯切向法来调节曲面边界的调和能量,调和能量下降的过程即非线性扩散过程;最后最小化调和能量,以获得曲面的共形映射.实验结果表明,文中方法是稳定的,映射结果可以很好地保证曲面三角网格的角度关系;算法对模型网格质量要求不高,具有更高的鲁棒性;与经典的共形映射方法相比,该方法得到的结果更均匀,共形效果更好.该方法可以在参数化、纹理映射、曲面注册等领域得到很好应用.     

基于黎曼度量的复杂参数曲面有限元网格生成方法

给出了三维空间的黎曼度量和曲面自身的黎曼度量相结合的三维复杂参数曲面自适应网格生成的改进波前推进算法.详细阐述了曲面参数域上任意一点的黎曼度量的计算和插值方法;采用可细化的栅格作为背景网格,在降低了程序实现的难度的同时提高了网格生成的速度;提出按层推进和按最短边推进相结合的方法,在保证边界网格质量的同时,提高曲面内部网格的质量.三维自适应黎曼度量的引入,提高了算法剖分复杂曲面的自适应性.算例表明,该算法对复杂曲面能够生成高质量的网格,而且整个算法具有很好的时间特性和可靠性.     

三角网格表面近似测地线的计算

为了有效地计算三角网格表面任意两点间的近似测地线,将三角网格模型表示成带权图,计算带权图上两点间的最短路径,并迭代细分最短路径邻域内的边以构造新的带权图求解.改进了细分顶点的生成策略,提出了邻域扩展的方法,提高了迭代运算速度,有效地解决了迭代细分算法容易陷入局部最优的问题;并把测地线距离应用于径向基函数,实现了一种曲面变形算法.实验表明该算法达到了较好的效果.     

Mesh generation and mesh refinement procedures for the analysis of concrete shells

In this paper, a mesh generation and mesh refinement procedure for adaptive finite element (FE) analyses of real-life surface structures are proposed. For mesh generation, the advancing front method is employed. FE meshes of curved structures are generated in the respective 2D parametric space of the structure. Thereafter, the 2D mesh is mapped onto the middle surface of the structure. For mesh refinement, two different modes, namely uniform and adaptive mesh refinement, are considered. Remeshing in the context of adaptive mesh refinement is controlled by the spatial distribution of the estimated error of the FE results. Depending on this distribution, remeshing may result in a partial increase and decrease, respectively, of the element size. In contrast to adaptive mesh refinement, uniform mesh refinement is characterized by a reduction of the element size in the entire domain. The different refinement strategies are applied to ultimate load analysis of a retrofitted cooling tower. The influence of the underlying FE discretization on the numerical results is investigated.     

Structured mesh generation by kriging with local refinement with a new elliptic scheme

Accurate results in finite element analysis are strongly related to mesh quality. In this paper, an automatic quadrilateral mesh generation methodology using kriging interpolation is described, a quality mesh study is conducted, and the development of a new local refinement scheme, called the elliptic scheme, is presented. The new elliptic refinement scheme is evaluated using four standard structural cases, and it is shown that it compares very well with octree-based refinement schemes and other local refinement methods.     

基于几何特征和力学特性的自适应网格生成算法

为获得适合有限元分析的满意网格划分,提出了平面域的基于几何特征和力学特性相结合的自适应网络生成方法,实现了应力集中区的网格局部加密及平稳变密度的网格自动剖分,通过实例表明本方法实用性强、效果良好。     

一类三角形网格的局部加密方法及其应用

5卫.引言网格生成是数值计算必需解决的问题.对于许多复杂的工程实际问题,由于物理参数的变化及解的性态复杂,对求解区域的网格疏密变化都有某些特殊的要求.虽然一般的非结构网格能够适应这些要     

A new scheme for mesh generation and mesh refinement using graph theory

There are an extensive number of algorithms available from graph theory, some of which, for problems with geometric content, make graphs an attractive framework in which to model an object from its geometry to its discretization into a finite element mesh. This paper presents a new scheme for finite element mesh generation and mesh refinement using concepts from graph theory. This new technique, which is suitable for an interactive graphical environment, can also be used efficiently for fully automatic remeshing in association with self-adaptive schemes. Problems of mesh refinement around holes and local mesh refinement are treated. The suitability of the algorithms presented in this paper is demonstrated by some examples.     

Comparison of the meccano method with standard mesh generation techniques

The meccano method is a novel and promising mesh generation technique for simultaneously creating adaptive tetrahedral meshes and volume parameterizations of a complex solid. The method combines several former procedures: a mapping from the meccano boundary to the solid surface, a 3-D local refinement algorithm and a simultaneous mesh untangling and smoothing. In this paper we present the main advantages of our method against other standard mesh generation techniques. We show that our method constructs meshes that can be locally refined using the Kossaczky bisection rule and maintaining a high mesh quality. Finally, we generate volume T-mesh for isogeometric analysis, based on the volume parameterization obtained by the method.     

Generation of 3D mixed element meshes using a flexible refinement approach

This paper describes and discusses the main characteristics and implementation issues of a 3D mixed element mesh generator based on a generalization of the modified octree approach. This mesh generator uses primitive elements of different type as internal nodes, a flexible refinement approach as refinement strategy (primitive elements are not always bisected), and bricks, pyramids, prisms and tetrahedra as final elements. The mesh generation process is divided in several steps: the generation of the initial mesh composed of primitive elements, the refinement of primitive elements until the point density requirements are fulfilled, the generation of a graded mesh between dense and coarse regions, and finally, the recognition of the final elements. The main algorithms and data structures are described in detail for each step of the mesh generation process. As result, examples of meshes that satisfy the Delaunay condition and that can be used with the control volume method are shown.     

A methodology for adaptive mesh refinement in optimum shape design problems

This work presents a methodology based on the use of adaptive mesh refinement (AMR) techniques in the context of shape optimization problems analyzed by the Finite Element Method (FEM). A suitable and very general technique for the parametrization of the optimization problem using B-splines to define the boundary is first presented. Then, mesh generation using the advancing front method, the error estimation and the mesh refinement criteria are dealt with in the context of a shape optimization problems. In particular, the sensitivities of the different ingredients ruling the problem (B-splines, finite element mesh, design behaviour, and error estimator) are studied in detail. The sensitivities of the finite element mesh coordinates and the error estimator allow their projection from one design to the next, giving an “a priori knowledge” of the error distribution on the new design. This allows to build up a finite element mesh for the new design with a specified and controlled level of error. The robustness and reliability of the proposed methodology is checked out with some 2D examples.     

Generation of Tetrahedral Meshes with Multiple Elements through Thin Sections

Finite element simulations in domains with strong gradients across thin sections typically require meshes with multiple elements through these sections to accurately capture the solution. Most of the published techniques for isotropic mesh generation are not suited for the creation of such meshes in general, arbitrarily complex, non-manifold domains. In this paper, an automatic method is described for identification of thin sections of a domain and anisotropic refinement of an initial mesh to introduce a user-requested number of elements through the thin sections. The method uses local mesh modification operations to effect the refinement and subsequent realignment of edges along the thickness direction and perpendicular to it. Results are presented for a number of general models to illustrate the capability of the mesh generator.     

BatTri: A two-dimensional bathymetry-based unstructured triangular grid generator for finite element circulation modeling

A brief summary of Delaunay unstructured triangular grid refinement algorithms, including the recent “off-centers” method, is provided and mesh generation requirements that are imperative to meet the criteria of the circulation modeling community are defined. A Matlab public-domain two-dimensional (2-D) mesh generation package (BatTri) based on these requirements is then presented and its efficiency shown through examples. BatTri consists of a graphical mesh editing interface and several bathymetry-based refinement algorithms, complemented by a set of diagnostic utilities to check and improve grid quality. The final output mesh node locations, node depths and element incidence list are obtained starting from only a basic set of bathymetric data. This simple but efficient setup allows fast interactive mesh customization and provides circulation modelers with problem-specific flexibility while satisfying the usual requirements on mesh size and element quality. A test of the “off-centers” method performed on 100 domains with randomly generated coastline and bathymetry shows an overall 25% reduction in the number of elements with only slight decrease in element quality. More importantly, this shows that BatTri is easily upgradeable to meet the future demands by the addition of new grid generation algorithms and Delaunay refinement schemes as they are made available.