首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 703 毫秒
1.
利用主动变采样周期方法, 本文研究了具有时延及丢包的网络控制系统的 H∞ 控制器设计问题, 其中采样周期在一个有限集合内切换. 提出了一个新的线性估计方法以补偿丢包的负面影响, 并利用多目标优化方法设计系统的 H∞ 控制器. 仿真结果表明了主动变采样周期方法及基于线性估计的丢包补偿方法的有效性.  相似文献   

2.
This article studies the problems of H output tracking performance analysis and controller design for networked control systems (NCSs) with time delay and packet dropout. By using linear matrix inequality (LMI)-based method, H output tracking performance analysis and controller design are presented for NCSs with constant sampling period. For NCSs with time-varying sampling period, a multi-objective optimisation methodology in terms of LMIs is used to deal with H output tracking performance analysis and controller design. The designed controllers can guarantee asymptotic tracking of prescribed reference outputs while rejecting disturbances. The simulation results illustrate the effectiveness of the proposed H output tracking controller design.  相似文献   

3.
This paper studies the problem of designing H∞ controllers for networked control systems (NCSs) with both network-induced time delay and packet dropout by using an active-varying sampling period method, where the sampling period switches in a finite set. A novel linear estimation-based method is proposed to compensate packet dropout, and H∞ controller design is also presented by using the multi-objective optimization methodology. The simulation results illustrate the effectiveness of the active-varying sampling period method and the linear estimation-based packet dropout compensation.  相似文献   

4.
This paper is concerned with the problem of H controller design for networked control systems (NCSs) with time delay and packet dropout. A combined switching and parameter uncertainty‐based method is proposed to deal with time‐varying delay. The proposed method can avoid the high computational complexity of the delay switching‐based method and introduce less conservatism than the parameter uncertainty‐based method. An active varying sampling period method is proposed to make full use of network bandwidth, and a multi‐objective optimization methodology in terms of linear matrix inequalities is used to deal with H controller design for NCSs with active varying sampling period. The simulation results illustrate the effectiveness of the proposed active varying sampling period method and the less conservatism of the combined switching and parameter uncertainty‐based method. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society  相似文献   

5.
This paper is concerned with the problem of H output tracking control for networked control systems (NCSs) with network‐induced delay and packet disordering. Different from the results in existing literature, the controller design in this paper is both delay‐ and packet‐disordering‐dependent. Based on the different cases of consecutive predictions, the networked output tracking system is modeled into a switched system. Moreover, by the corresponding switching‐based Lyapunov functional approach, a linear matrix inequality (LMI)‐based procedure is proposed for designing state‐feedback controllers, which guarantees that the output of the closed‐loop NCSs tracks the output of a given reference model well in the H sense. In addition, the proposed method can be applied variously due to all kinds of prediction numbers of the consecutive disordering packet have been considered, and the designed controller is based on the prediction case in the last transmission interval, which brings about less conservatism. Finally numerical examples and simulations are used to illustrate the effectiveness and validity of the proposed switching‐based method and the delay‐ and packet‐disordering‐dependent H output tracking controller design.  相似文献   

6.
This paper investigates the H control synthesis problem for Lurie networked control systems (NCSs) with multiple time‐varying delays. With the consideration of both network‐induced delays and data packet dropout, Lurie NCSs discussed in this work can effectively be transformed into Lurie control systems with multiple time‐varying delays. In addition, with the non‐uniform distribution characteristics of network delays, based on the delay probability distribution, the stable controller design, and H synthesis, approaches are derived in the form of linear matrix inequalities (LMIs). Finally, a set of numerical examples are studied, and the results demonstrate the applicability and effectiveness of the suggested approaches.  相似文献   

7.
时滞系统方法的网络化H∞控制   总被引:1,自引:0,他引:1       下载免费PDF全文
针对网络控制系统的主要影响因素,建立包含网络诱导时延和数据丢包及错序等非理想网络状况的系统统一模型。以此为基础,对闭环网络控制系统进行了H性能分析和H控制器设计。由于采用新的时滞系统分析方法并考虑网络诱导时延的下界大于零这一事实,所设计的控制器具有较小的保守性和广泛的适应性。最后通过仿真例子,表明所得结果的正确性。  相似文献   

8.
This paper is concerned with H control of networked control systems (NCSs) with both network-induced delay and packet disordering taken into account. A switching-based method depends on different cases of prediction numbers is presented to model the NCSs as a switched system. With the application of an improved prediciton-based method to compensate for the time delay and packet disordering, H controller is designed by solving the linear matrix inequalities (LMIs). The proposed method can be applied variously due to all kinds of prediciton numbers of the consective disordering packet have been considered, which means that our techniques are less conservative than existing literatures. Finally numerical examples and simulations are used to illustrate the effectiveness and validity of the proposed switching-based method and the improved prediction-based H controller design synthesis.  相似文献   

9.
针对一类T-S 模糊模型描述的网络控制系统(NCSs) 非脆弱H跟踪控制问题进行研究. 首先, 综合考虑网络中数据传输时滞和数据丢包的影响, 采用输入时滞法和并行分布补偿(PDC) 技术, 建立基于T-S 模糊模型的NCSs 状态跟踪误差模型; 然后, 利用Lyapunov 方法和改进的自由权矩阵方法, 基于线性矩阵不等式(LMI), 给出满足系统H 跟踪性能的条件, 并给出非脆弱模糊控制器设计方法; 最后, 通过仿真实例表明了该方法的有效性.  相似文献   

10.
This paper is concerned with the H control problem for networked control systems (NCSs) with random packet dropouts. The NCS is modeled as a sampled‐data system which involves a continuous plant, a digital controller, an event‐driven holder and network channels. In this model, two types of packet dropouts in the sensor‐to‐controller (S/C) side and controller‐to‐actuator (C/A) side are both considered, and are described by two mutually independent stochastic variables satisfying the Bernoulli binary distribution. By applying an input/output delay approach, the sampled‐data NCS is transformed into a continuous time‐delay system with stochastic parameters. An observer‐based control scheme is designed such that the closed‐loop NCS is stochastically exponentially mean‐square stable and the prescribed H disturbance attenuation level is also achieved. The controller design problem is transformed into a feasibility problem for a set of linear matrix inequalities (LMIs). A numerical example is given to illustrate the effectiveness of the proposed design method. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society  相似文献   

11.
This paper focuses on the design of H filter and event-triggered scheme for a class of continuous non-linear networked control systems (NCSs) based on fuzzy system appeared with time delays. First, we consider the discrete event-triggered (ET) scheme to make efficient utilisation of bandwidth. Under this ET-scheme, sensor releases the data only when our sampled-data plant violates the specific event-triggered condition. Second, the T-S fuzzy system is used to model the non-linear NCSs. Another purpose of this paper is to design filters involving delays. Such filters have a more general form than the delay-free filters that have been mostly considered in the traditional studies. By using the time-delay system, co-design of event-triggered scheme and H filter for the delayed NCSs is presented in a unified frame work. To choose the latest data packet and discard the dis-ordered packet logic, zero-order hold is inserted between the fuzzy filter and event generator. Then, by using the novel fuzzy Lyapunov–Krasovskii function approach with free-weighting matrix technique, H filter design of event-triggered delay NCSs is proposed. Finally, to show the effective result of our co-design method, a tunnel-diode example is given.  相似文献   

12.
This paper is concerned with the observer‐based H control for continuous‐time networked control systems (NCSs) considering packet dropouts and network‐induced delays. The packet dropouts and network‐induced delays in the sensor‐to‐controller (S‐C) channel and network‐induced delays in the controller‐to‐actuator (C‐A) channel are taken into full consideration. By taking the non‐uniform distribution characteristic of the arrival instants of actually adopted controller inputs into account, a new model for continuous‐time NCSs is established. To reduce the conservatism of modelling, a linear estimation‐based measurement output estimation method is introduced. Based on the newly established model and a Lyapunov functional, new controller design methods are proposed. A numerical example is given to illustrate the effectiveness and merits of the derived results.  相似文献   

13.
This paper is concerned with the problem of robust H controller design for a class of uncertain networked control systems (NCSs). The network‐induced delay is of an interval‐like time‐varying type integer, which means that both lower and upper bounds for such a kind of delay are available. The parameter uncertainties are assumed to be normbounded and possibly time‐varying. Based on Lyapunov‐Krasovskii functional approach, a robust H controller for uncertain NCSs is designed by using a sum inequality which is first introduced and plays an important role in deriving the controller. A delay‐dependent condition for the existence of a state feedback controller, which ensures internal asymptotic stability and a prescribed H performance level of the closed‐loop system for all admissible uncertainties, is proposed in terms of a nonlinear matrix inequality which can be solved by a linearization algorithm, and no parameters need to be adjusted. A numerical example about a balancing problem of an inverted pendulum on a cart is given to show the effectiveness of the proposed design method.  相似文献   

14.
In this article, the problem of sampled-data H control for networked control systems (NCSs) with digital control inputs is considered, where the physical plant is modelled as a continuous-time one, and the control inputs are discrete-time signals. By exploiting a novel Lyapunov–Krasovskii functional, using the Leibniz–Newton formula and a free-weighting matrix method, sufficient conditions for sampled-data H performance analysis and H controller design for such systems are given. Since the obtained conditions of H controller design are not expressed strictly in term of linear matrix inequalities, the sampled-data H controller is solved using modified cone complementary linearisation algorithm. In addition, the new sampled-data stability criteria for the NCSs is proved to be less conservative than some existing results. Numerical examples demonstrate the effectiveness of the proposed methods.  相似文献   

15.
This paper considers the design of mixed event/time‐triggered controllers for networked control systems (NCSs) under transmission delay and possible packet dropout. Assuming that a conventional delayed static output feedback L2‐gain controller exists, we propose an output‐based mixed event/time‐triggered communication scheme for reducing the network traffic in a NCS. Moreover, we show that a conventional delayed static output feedback L2‐gain controller can be obtained by solving a linear matrix inequality with a matrix equality constraint. A numerical example is proposed for demonstrating the theoretical results.  相似文献   

16.
The problem of quantized H control for networked control systems (NCSs) subject to time‐varying delay and multiple packet dropouts is investigated in this paper. Both the control input and the measurement output signals are quantized before being transmitted and the quantized errors are described as sector bound uncertainties. The measurement channel and the control channel packet dropouts are considered simultaneously, and the stochastic variables satisfying Bernoulli random binary distribution are utilized to model the random multiple packet dropouts. Sufficient conditions for the existence of an observer‐based controller are established to ensure the exponential mean‐square stablility of the closed‐loop system and achieve the optimal H disturbance attenuation level. By using a globally convergent algorithm involving convex optimization, the nonconvex feasibility can be solved successfully. Finally, a numerical example is given to illustrate the effectiveness and applicability of the proposed method.  相似文献   

17.
This paper considers the problem of delay‐dependent adaptive reliable H controller design against actuator faults for linear time‐varying delay systems. Based on the online estimation of eventual faults, the parameters of adaptive reliable H controller are updating automatically to compensate the fault effects on the system. A new delay‐dependent reliable H controller is established using a linear matrix inequality technique and an adaptive method, which guarantees the stability and adaptive H performance of closed‐loop systems in normal and faulty cases. A numerical example and its simulation results illustrate the effectiveness of the proposed method. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

18.
This article addresses the problem of controller design for networked control systems over digital communication. The systems under consideration are stabilised via state feedback, where the effects of sampled signal, state quantisation, network-induced delay and packet dropout are considered. The proposed delay-dependent stability criteria are formulated in the form of a linear matrix inequality, which ensure asymptotic stability and a prescribed H performance level for networked control systems with admissible uncertainties. Maximum allowable delay bound of networked control systems is obtained by solving a convex optimisation problem. Furthermore, a numerical example is given to illustrate the effectiveness of the main result.  相似文献   

19.
This paper studies the problem of H model reference tracking control for continuous time networked control systems (NCSs) with communication constraints. By using the continuous Jensen inequality, linear matrix inequality (LMI)-based H model reference tracking controller design for nominal NCSs with controller-to-actuator communication constraints is presented, and a new method is proposed to design H model reference tracking controllers for NCSs with both controller-toactuator and sensor-to-controller communication constraints. The results are also extended to NCSs with norm-bounded parameter uncertainties. The merits of the proposed methods lie in their less computational complexity and less conservatism, which are achieved by adopting continuous Jensen inequality and proposing new controller design methods, respectively. The simulation results illustrate the effectiveness of the proposed H model reference tracking controller design for NCSs with communication constraints.  相似文献   

20.
This article considers the H control problem for a class of networked control systems (NCSs) based on the event-time-driven model, under which the considered NCS can be changed into a class of switched delay systems including an unstable subsystem. The Lyapunov functional exponential estimation method is adopted to solve the problem of H control for such systems. The switching controller is designed to make the considered system exponentially stable with an H norm bound in terms of linear matrix inequalities. The obtained results are less conservative than existing ones. Finally, one example is given to illustrate the effectiveness and benefit of the proposed method.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号