基于子载波配对的多用户协作中继系统资源分配算法

针对多用户协作中继系统中的功率最小化问题,提出了一种基于联合子载波配对及分配的资源分配算法。首先根据不同用户的目标速率要求及平均信道增益进行子载波数目的分配;然后以信道条件最佳为准则,提出了一种联合子载波配对及分配的多用户迭代算法,以实现对每个用户的中继链路和直传链路分别进行子载波配对及虚拟配对;最后利用注水算法对子载波进行功率分配,从而保证各用户以最小功率进行传输。仿真结果表明,该算法在满足用户目标速率的情况下,能够进行有效的子载波配对及分配,从而最小化系统的发射功率。     

协作系统中基于比例公平的资源分配方法

针对多用户协作中继系统中的资源分配问题,提出了一种在满足用户速率比例公平约束条件下的新算法。该算法先将由2个时隙组成的中继用户传输链路转换为一个等效信道链路,将涉及子载波分配、中继选择和功率分配的组合优化问题转化为分步的次优化问题。该算法在等功率分配情况下,根据各用户速率比例公平系数进行初步子载波数目分配;以瞬时信道增益最佳原则,进行剩余子载波数目分配及具体子载波分配,同时完成中继选择;在速率比例公平约束条件下推导出次优化功率分配的闭式表达式,从而完成各子载波上的功率分配。仿真结果表明,该算法在有效提高系统容量的同时,保证了各用户速率之间的比例公平性。     

一种兼顾速率公平的多用户子载波功率联合分配算法

随着无线通信技术的迅猛发展,无线资源的需求量越来越大,用户对服务质量的要求也越来越高,因此,未来通信系统需要智能地在用户服务质量(QoS)需求和无线资源限制间进行一个有效的折中。为了提高认知无线网络频谱利用率,在可用子载波、次级用户功率预算及公平性等约束条件下,基于速率自适应(RA)准则,提出了在认知正交频分复用(OFDM)系统中兼顾速率公平的多用户子载波功率联合分配算法。该算法将子载波和功率分配分为两步,在兼顾各次级用户速率公平性的同时,最大化链路容量。仿真结果表明,该联合分配算法在系统吞吐量与次级用户速率公平性之间可以取得有效的折中。     

优化公平性的多用户OFDM系统下行链路资源分配算法

研究了优化公平性的多用户OFDM系统下行链路的资源分配算法,根据系统各用户的业务需求,在保证用户所得数据速率满足一定比例以及系统总功率限制的前提下,提高系统总数据速率。首先,根据公平性原则进行用户的子载波分配,子载波功率分配使用注水算法;子载波分配完成后,利用贪婪功率分配算法,以最大化用户数据速率和提高功率利用率为目标,对各用户内部子载波功率和比特数进行再分配。仿真结果表明,相比参考文献[10]的算法,该算法在提高系统总速率的同时,更好地保证了用户数据速率的公平性;相比参考文献[12]的算法,该算法虽然牺牲了一定的系统总速率,但能提供更高的用户数据速率公平性。     

基于比例速率保证的信道误差OFDMA中继系统资源分配

针对存在有信道估计误差的正交频分多址( OFDMA)中继系统,在考虑用户传输中断概率的同时,提出了满足不同用户最小服务质量( QoS)需求和比例公平性约束条件下的中继选择、子载波分配和功率分配的联合优化问题,建立了以最大化系统总容量为目标的优化模型。在此基础上以速率最大化为目标进行最佳中继选择,并通过动态子载波分配来满足用户的最小QoS需求和比例公平性,最后采用拉格朗日乘子法来得到最优功率分配方案。仿真结果表明,此算法在降低用户中断概率的同时,提高了系统吞吐量并保证了用户速率的比例公平性。     

提供QoS保证的比例公平调度改进算法及其应用

优化分配有限的无线资源以提高系统容量,同时为不同用户的不同业务提供服务质量保障,是未来无线通信的关键问题之一.传统的比例公平(PF)算法是系统吞吐量与公平性的折中,没有考虑用户的QoS需求.对传统的PF算法作一些改进,根据用户的目标速率设置不同的加权值.根据时延设置不同的历史平均窗长,以提供一定的QoS保证;并分析了该算法在多天线多载波系统下行链路中的性能.仿真结果表明改进的PF算法能根据用户需求提供QoS保证,同时获得多用户分集增益.     

基于比例公平原则的多用户MIMO-OFDM系统资源分配

提出了一种基于比例公平原则提高MIMO-OFDM系统吞吐量的子载波和功率分配算法.它在总功率和误比特率的约束下,以获取最大系统吞吐量为目标,同时为兼顾用户间资源享用的公平性,根据用户速率成比例推导出了子载波分配限制准则.仿真结果表明,本算法不仅可满足不同用户的速率要求,而且平衡了容量最大化和用户间公平性的矛盾,同时计算...     

改进的多用户OFDM系统子载波和比特分配算法

针对多用户正交频分复用（OFDM）系统资源分配问题,提出了一种改进的基于边缘自适应（MA）准则的子载波和比特分配算法。在采用比例公平准则为每个用户分配子载波集合基础上,以用户速率最大者-最小者（Max-Min）子载波交换为原则进行子载波调整,使用户功率递减同时兼顾用户的公平性;通过对信道状态信息进行判断,利用贪婪算法将用户子载波分配的比特取整,以实现系统功率最小化。实验结果表明,本文提出的改进次优算法的计算复杂度较传统分步算法稍高,但仍远低于最优算法,其系统性能得以提升,且接近最优算法。     

多用户OFDM系统中一种新颖的自适应功率分配方案

针对多用户正交频分复用(OFDM)系统自适应资源分配的问题,提出了一种新的自适应子载波分配方案。子载波分配中首先通过松弛用户速率比例约束条件确定每个用户的子载波数量,然后对总功率在所有子载波间均等分配的前提下,按照最小比例速率用户优先选择子载波的方式实现子载波的分配;在功率分配中提出了一种基于人工蜂群算法和模拟退火算法(ABC-SA)相结合的新功率分配方案,并且通过ABC-SA算法的全局搜索实现了在所有用户之间的功率寻优,同时利用等功率的分配方式在每个用户下进行子载波间的功率分配,最终实现系统容量的最大化。仿真结果表明,与其他方案相比,所提方案在兼顾用户公平性的同时还能有效地提高系统的吞吐量,进而证明了所提方案的有效性。     

不完整CSI下OFDMA无线中继系统资源分配算法研究

针对实际OFDMA系统中下行无线链路信道状态信息(CSI)不完善的前提下,提出一种满足不同用户QoS需求的资源分配算法。在该方案中,首先确定用户与中继站之间的CSI,然后在总功率约束条件下,通过在等功率分配降低算法复杂度的基础上进行最佳中继选择和子载波的分配,最后再对子载波进行注水的功率分配来进一步提高系统容量。仿真结果表明,该方案在保证用户QoS的同时进一步提高系统容量。     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.