时序电路逻辑参数提取激励波形的自动生成

本文提出了在提取时序电路逻辑参数时,应用于SPICE模拟时的激励波形自动生成算法,该算法可以根据用户指定的各种相关参数进行激励波形的自动生成,从而缩短了建立逻辑参数库的时间.     

一类时序逻辑电路的逻辑参数提取 激励波形自动生成

提出了对具有反馈信息的时序逻辑电路进行逻辑参数提取时用于SPICE模拟的激励波形自动生成方法,该方法能根据用户指定的要提取的时延参数要求,很快产生这种时序逻辑电路的模拟激励波形,从而可以加快逻辑参数的提取过程,保证参数提取激励波形的正确性．该方法的实现,可以使逻辑参数的提取完全自动化,缩短了逻辑参数库的建立时间,具有较高的适用价值．     

一类时序逻辑电路的逻辑参数提取激励波形自动生成

提出了对具有反馈信息的时序逻辑电路进行逻辑参数提取时用于 SPICE模拟的激励波形自动生成方法 ,该方法能根据用户指定的要提取的时延参数要求 ,很快产生这种时序逻辑电路的模拟激励波形 ,从而可以加快逻辑参数的提取过程 ,保证参数提取激励波形的正确性 .该方法的实现 ,可以使逻辑参数的提取完全自动化 ,缩短了逻辑参数库的建立时间 ,具有较高的适用价值     

逻辑参数库中Power参数的提取

本文介绍了在LPE这个逻辑参数(电学参数)自动提取工具里，Power参数的定义以及提取Power的输入激励波形的生成算法。对于不同的Related Pin以及电路的反馈特性需要不同的激励波形生成算法。     

基于反向遍历组合单元BDD的延时参数激励波形自动生成算法

本文研究了深亚微米工艺条件下单元特征参数提取和建模的激励生成，提出了一种基于反向遍历组合单元BDD的延时参数激励波形生成算法。该算法通过分析组合单元延时参数激励波形的特征和单元BDD的特征，推导了组合单元延时激励波形的生成定理，给出了基于该定理的组合单元延时激励波形生成算法。算法能快速完备地生成延时参数的激励波形，避免了复杂的布尔函数运算，提高了激励波形的生成效率。     

一种标准单元库的自动仿真验证方法

提出了一种针对标准单元库中单元逻辑功能进行自动仿真验证的方法,验证了55 nm标准单元库中单元逻辑功能的正确性。该方法能自动提取设计文档中的单元逻辑,根据提取结果中输入端的数量自动生成测试向量,并以此测试向量生成参考逻辑值,整个过程只需0.708 μs。采用仿真工具对标准单元库文件进行仿真,将得到的仿真值自动与参考值对比,验证了库单元逻辑的正确性,提高了标准单元库功能验证的效率。     

WAF规则的自动探测与发现技术研究

本文设计了一款自动探测WAF规则的工具,在输入了网址和目标参数后能够自动探测其WAF的规则.工具主要分为三大模块:网站过滤检测模块、攻击向量生成模块、过滤规则生成模块.其中增加了正则表达式匹配功能,使用最小元素优先检测法以及二分法提升了程序运行的效率;使用多线程有效地缓解了网络延迟带来的探测速度慢的问题.工具中设计了良好的攻击向量库能够使探测更为高效和精准,同时这个库也是开放可随时增加的.     

基于状态机自动生成的SoC硬件接口综合方法

在SoC接口综合方法设计中，由于大多数IP的接口设计和通信协议是不同的，所以必须要发展能结合不同通信协议IP模块的方法。文章提出了一种基于状态机(FSM)自动生成的硬件接口综合方法，其在给定两个子模块的HDL模型的情况下，根据数据传送的逆过程就可以自动生成与其通信的状态机，同时．该方法也给出了一个参数化的缓冲器和数据格式转换．用户可以根据需要选择合适的库。最后，通过一个实例验证了该方法并给出了仿真波形。     

用于工艺流程自动生成的排序算法

文章介绍了一种工艺流程的自动排序算法。该算法将器件的结构作为输入信息,利用工艺库,得到可制造出该器件的工艺路线。该算法可应用于VLI制造的工艺流程卡自动生成。     

感性脉冲电流注入装置的SPICE电路建模

为预测电子设备传导敏感度试验中脉冲电流注入在设备端口产生的干扰强度及波形,建立了感性电流注入装置的SPICE(Simulation Program with Integrated Circuit Emphasis)电路模型.在将装置电路模块化的基础上,应用传输矩阵计算的方法,从实验数据中提取出各模块的电路参数或方程表达式,并转换为SPICE模型,最后再将各模块组合为完整的装置模型.频域和时域的实验显示,模拟结果和测量结果一致性较好.建立的电路模型可用于设计和优化脉冲电流注入试验.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Nanoimprint Lithography -A Next Generation High Volume Lithography Technique

IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL…     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.     

Analysis of error performance on Turbo coded FDPIM

Due to variable symbol length of digital pulse interval modulation（DPIM）, it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation（FDPIM） method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.