共查询到20条相似文献,搜索用时 62 毫秒
1.
基于故障树和神经网络的飞机电源系统故障诊断研究 总被引:1,自引:0,他引:1
介绍了基于故障树模型的故障诊断技术和基于神经网络的故障诊断技术,提出了基于故障树和神经网络的集成故障诊断思想。在此基础上,以交流发电机旋转整流器二极管开路故障为例进行了实例分析,说明了故障树和神经网络集成故障诊断技术对此故障的诊断,结果表明该方法用于解决此类问题是有效的。 相似文献
2.
3.
《电子技术与软件工程》2016,(10)
风力发电正在电力行业中占有越来越重要的位置。然而因为所处的环境条件恶劣,风力发电机经常容易发生故障。传统的状态监测与故障诊断方法较为费时费力,又因为无法采集到所有的故障信息,所以BP神经网络无法做出正确诊断。因此,将SOM神经网络应用于风力发电机组的振动故障诊断中。用正常运行的样本数据对网络进行训练,根据检测样本输出神经元在输出层的位置对是否发生故障进行判断。经实例分析证明,该方法可对风电机组的故障进行有效诊断。 相似文献
4.
针对滚动轴承的故障信号存在大量噪声信号和滚动轴承故障的准确诊断等问题,提出一种基于改进自适应迭代滤波算法与萤火虫算法优化BP神经网络相结合的故障诊断新方法。首先采用自适应迭代滤波算法对故障信号进行分解得到若干个内禀模态函数,再进行奇异值分解,绘制差分谱曲线并选择重构信号,对其进行二次降噪;然后通过萤火虫算法寻找BP神经网络的最佳参数,建立FA-BP故障诊断模型,提取降噪后的内禀模态函数中心频率形成特征矩阵,输入故障诊断模型;最后应用于美国凯斯西储大学的轴承数据进行检测,准确率达99.4%,诊断时间为3.18 s。该方法与BP神经网络、萤火虫算法网络、遗传算法网络、遗传算法优化BP神经网络的诊断模型相比,大大提高了诊断效率并具有较高准确率。 相似文献
5.
基于BP神经网络的电控发动机故障诊断 总被引:1,自引:0,他引:1
《现代电子技术》2015,(9):128-131
针对汽车发动机电控系统结构的复杂性,提出用BP神经网络进行故障诊断的方法。以北京现代05款途胜G4GC型发动机电控系统为实验,并对其进行故障设置,采集发动机故障数据流,运用BP神经网络构建诊断模型,并且改变BP训练方法。诊断结果表明用BP神经网络诊断发动机电控系统故障是行之有效的,具有较好的应用前景。 相似文献
6.
模拟数字电路故障诊断新方法 总被引:1,自引:0,他引:1
利用小波变换与神经网络相结合的方法,采用能量分布特征提取方法和改进BP算法,给出了一种基于小波变换和BP神经网络相结合的模拟电路故障诊断方法.用正弦信号仿真模拟电路,应用小波变换对模拟电路的采样信号进行多尺度分解,再进行能量分布特征提取,然后利用神经网络对各种状态下的特征向量进行分类识别,实现模拟电路故障诊断.在用神经网络诊断模拟电路的基础上,进行了将神经网络用于数字电路单故障诊断的研究.对两者的实例电路仿真结果表明,神经网络可以有效、方便地实现电路的故障检测和定位,准确率高,为故障诊断的研究提供了一种新思路. 相似文献
7.
8.
9.
在研究故障树分析(FE气)和双向联想记忆(BAM)神经网络在故障诊断中应用的基础上,提出了一种融合FTA和BAM的故障诊断方法.故障树存贮了系统关于顶事件发生的全部知识,利用FTA得到系统所有的故障模式,进而归纳出BAM的学习样本,即故障树中故障现象(监测点状态组合)和底事件发生与否之间的对应.RAM通过联想记忆矩阵并行联想,得到诊断结果,扩展综合故障诊断能力.仿真结果表明该方法用于解决此类问题是有效的. 相似文献
10.
故障树分析方法是一种实用的故障分析方法,文章通过对某单脉冲雷达建立故障树模型,进行定性、定量分析计算。利用构建故障树来进行无线电测量设备故障诊断分析,不仅可以方便推理机构寻找潜在故障或进行故障诊断,而且可以进一步预测未来系统故障发生的概率,便于测量设备故障的检测与定位。 相似文献
11.
Meihua Shen Wilfred Pau Nicolas Gani Jianping Wen Shashank Deshmukh Thorsten Lill Jian Zhang Hanming Wu Guqing Xing 《半导体技术》2004,29(8)
This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration. 相似文献
12.
White organic light-emitting devices based on fac tris(2- phenylpyridine) iridium sensitized 5,6,11,12-tetraphenylnap -hthacene 总被引:1,自引:0,他引:1
We have fabricated the white organic light-emitting devices (WOLEDs) based on 4,4' -bis(2,2 -diphenyl vinyl)-1,1' - biphenyl (DPVBi) and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene (rubrene). The device structure is ITO/2T-NATA (20 nm)/NPBX (20 nm)/CBP: x%Ir(ppy)3:0.5% rubrene (8 nm)/NPBX (5 nm)/DPVBi (30 nm)/Alq(30 nm)/LiF(0.5 nm)/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris (2-phenylpyridine) iridium [Ir(ppy)3], acts as a yellow light-emitting layer, and N,N' -bis- (1-naphthyl)- N,N' -diphenyl -1, 1' -biphenyl-4,4' -diamine (NPBX) acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir (PPY)3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V. 相似文献
13.
Complete approach to automatic identification and subpixel center location for ellipse feature 总被引:1,自引:0,他引:1
XUE Ting WU Bin SUN Mei YE Sheng-hua 《光电子快报》2008,4(1):51-54
To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction. 相似文献
14.
15.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy. 相似文献
16.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center. 相似文献
17.
This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors. 相似文献
18.
Credence Systems Corporation 《半导体技术》2004,29(9)
Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V. 相似文献
19.
YUXiao-hua XIANGYu-qun 《半导体技术》2005,30(2):30-32,37
An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB. 相似文献
20.
It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer (LDV). 相似文献