共查询到20条相似文献,搜索用时 46 毫秒
1.
DDS技术在高频石英晶体测试系统中的应用 总被引:1,自引:1,他引:0
在此介绍了一种以DDS芯片AD9912作为信号源的高频石英晶体测试系统。AD9912是一款直接数字频率合成芯片。一方面,AD9912内部时钟速度可高达1GSPS,并集成了14位数/模转换器,可以直接输出400MHz信号;另一方面,AD9912的频率控制字为48位,可以小于4μHz的分辨率输出信号。由于采用了DDS芯片AD9912作为信号源,所设计的石英晶体测试系统能够在20kHz~400MHz范围内测试石英晶体的串联谐振频率。与国内目前普遍使用的基于振荡器和阻抗计测试方法的测试仪相比,该测试系统具有测试频率范围宽、重复精度高等优点。 相似文献
2.
3.
4.
DDS(Direct Digital Synthesis)是一种新型的数字频率合成技术,该技术具有频率转换快、频率分辨率高等特点,得到了广泛的应用。本系统以单片机8751为控制核心,外接DDS芯片组成了智能化信号源,可以产生DC 100 MHz的高稳定正弦波、方波、三角波调幅波及扫频信号。输出稳定度、精度极高,适用于当代的通信系统和精密的高精度仪器。 相似文献
5.
一、序言随着科学技术,特别是电子技术的飞速发展,压电石英谐振器(简称晶体)和晶体滤波器在无线电通讯、导航、载波电话、电视广播、深空跟踪、测量仪器、电力传输、手表工业等方面都获得了广泛的应用。由于通讯信道增多,频率密集,频率和时间计量精度要求越来越高,所以对压电石英谐振器频率精确度,稳定度提出了越来越高的要求,石英谐振器的频率也越来越高。为了更好地检测、分类、正确使用,同时促进石英谐振器及器件的 相似文献
6.
对信号源的频率稳定度进行了分析,在此基础上提出了一种同时测量相参振荡器频率稳定度与定相精度的方法。该方法具有结构简单、操作方便的优点,且所需设备少,可达到较高的测量精度。 相似文献
7.
Shawn Logan 《今日电子》2010,(5):29-30
由体波石英晶体元件构成的振荡电路和压控振荡电路谐振元素具有卓越的长期和短期频率稳定度。最早使用体波石英晶体来控制振荡电路频率的历史可以追溯到1919年,当时,卫斯理大学(Wesleyan University)的W.G.Cady教授首先使用了一片石英晶体来控制振荡器的输出频率。 相似文献
8.
9.
本文阐述高稳定电磁振荡频率源(原子频率标准及石英振荡器等)输出频率的短期稳定度的各种定义,它们彼此之间的相互关系以及换标方法。介绍目前对短期稳定度进行测量的主要方法及数据处理技术。引言高稳定的电磁振荡频率源(包括各式原子频率标准及高稳定石英振荡器等)在许多尖端科学技术领域中的应用日益广泛,并起着日益重要的作用。对高稳定频率源的主要技术要求,是其输出频率的准确度和稳定度。在许多应用中,由于发射接收系绕可以用同一个频率源来控制,或者可以进行同步统调,故对频率准确度和长期稳定度并不一定要求非常严格;然而对其短期稳定度则往往提出十分严格的要求,因为它对整个工程系统的精确度和分辨力往往起决定性的作用。 相似文献
10.
11.
Meihua Shen Wilfred Pau Nicolas Gani Jianping Wen Shashank Deshmukh Thorsten Lill Jian Zhang Hanming Wu Guqing Xing 《半导体技术》2004,29(8)
This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration. 相似文献
12.
White organic light-emitting devices based on fac tris(2- phenylpyridine) iridium sensitized 5,6,11,12-tetraphenylnap -hthacene 总被引:1,自引:0,他引:1
We have fabricated the white organic light-emitting devices (WOLEDs) based on 4,4' -bis(2,2 -diphenyl vinyl)-1,1' - biphenyl (DPVBi) and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene (rubrene). The device structure is ITO/2T-NATA (20 nm)/NPBX (20 nm)/CBP: x%Ir(ppy)3:0.5% rubrene (8 nm)/NPBX (5 nm)/DPVBi (30 nm)/Alq(30 nm)/LiF(0.5 nm)/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris (2-phenylpyridine) iridium [Ir(ppy)3], acts as a yellow light-emitting layer, and N,N' -bis- (1-naphthyl)- N,N' -diphenyl -1, 1' -biphenyl-4,4' -diamine (NPBX) acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir (PPY)3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V. 相似文献
13.
Complete approach to automatic identification and subpixel center location for ellipse feature 总被引:1,自引:0,他引:1
XUE Ting WU Bin SUN Mei YE Sheng-hua 《光电子快报》2008,4(1):51-54
To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction. 相似文献
14.
15.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy. 相似文献
16.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center. 相似文献
17.
Credence Systems Corporation 《半导体技术》2004,29(9)
Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V. 相似文献
18.
This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors. 相似文献
19.
YUXiao-hua XIANGYu-qun 《半导体技术》2005,30(2):30-32,37
An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB. 相似文献
20.
It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer (LDV). 相似文献