SiC衬底AlN缓冲层的应变对GaN外延层质量的影响

在3英寸(1英寸=2.54 cm)SiC衬底上采用金属有机物化学气相沉积(MOCVD)法生长GaN外延材料。研究了AlN缓冲层的应变状态对GaN外延层应变状态和质量的影响。使用原子力显微镜和高分辨率X射线双晶衍射仪观察样品表面形貌,表征外延材料质量的变化,使用高分辨喇曼光谱仪观察外延材料应力的变化,提出了基于外延生长的应变变化模型。实验表明,GaN外延层的张应变随着AlN缓冲层应变状态的由压变张逐渐减小,随着GaN张应力的逐渐减小,GaN位错密度也大大减少,表面形貌也逐渐变好。     

在复合衬底γ-Al2O3/Si(001)上生长GaN

采用分子束外延(MBE)生长方法,使用γ-Al2O3材料作为新型过渡层,在Si(∞1)衬底上获得了没有裂纹的GaN外延层,实验结果表明使用γ-Al2O3过渡层有效地缓解了外延层中的应力.通过生长并测试分析几种不同结构的外延材料,研究了复合衬底γ-Al2O3/Si(001)生长GaN情况,得到了六方相GaN单晶材料,实现了GaN c面生长.预铺薄层Al及高温AlN层可以提高GaN晶体质量,低温AlN缓冲层可以改善GaN表面的粗糙度.为解决Si(001)衬底上GaN的生长问题提供了有益的探索.     

在复合衬底γ-Al2O3/Si(001)上生长GaN

采用分子束外延(MBE)生长方法,使用γ-Al2O3材料作为新型过渡层,在Si(∞1)衬底上获得了没有裂纹的GaN外延层,实验结果表明使用γ-Al2O3过渡层有效地缓解了外延层中的应力.通过生长并测试分析几种不同结构的外延材料,研究了复合衬底γ-Al2O3/Si(001)生长GaN情况,得到了六方相GaN单晶材料,实现了GaN c面生长.预铺薄层Al及高温AlN层可以提高GaN晶体质量,低温AlN缓冲层可以改善GaN表面的粗糙度.为解决Si(001)衬底上GaN的生长问题提供了有益的探索.     

采用AlN缓冲层在Si(111)衬底上生长GaN的形貌

针对Si衬底上生长GaN具有的特有形貌进行了研究,分析采用扫描电镜(SEM)、X射线能谱仪(EDS)、原子力显微镜(AFM)等手段,研究了使用AlN作为缓冲层的GaN的生长模式、缺陷形成机理、应力释放机制.并且发现缓冲层厚度和外延层生长温度对裂纹和表面缺陷的形成有很大的影响.     

采用AlN缓冲层在Si(111)衬底上生长GaN的形貌

针对Si衬底上生长GaN具有的特有形貌进行了研究,分析采用扫描电镜(SEM)、X射线能谱仪(EDS)、原子力显微镜(AFM)等手段,研究了使用AlN作为缓冲层的GaN的生长模式、缺陷形成机理、应力释放机制.并且发现缓冲层厚度和外延层生长温度对裂纹和表面缺陷的形成有很大的影响.     

蓝宝石上横向外延GaN薄膜

在蓝宝石衬底上利用金属有机物气相外延(MOCVD)方法对横向外延(ELO)GaN薄膜的生长条件进行了研究.在蓝宝石衬底上利用化学腐蚀的方法刻饰出图案,再沉积低温GaN缓冲层作为外延层的子晶层,以降低外延层与衬底的晶格失配与热失配,制备出低位错密度的GaN外延层.分别利用X射线衍射、原子力显微镜及湿法腐蚀对外延层进行检测.     

蓝宝石上横向外延GaN薄膜

在蓝宝石衬底上利用金属有机物气相外延(MOCVD)方法对横向外延(ELO)GaN薄膜的生长条件进行了研究.在蓝宝石衬底上利用化学腐蚀的方法刻饰出图案,再沉积低温GaN缓冲层作为外延层的子晶层,以降低外延层与衬底的晶格失配与热失配,制备出低位错密度的GaN外延层.分别利用X射线衍射、原子力显微镜及湿法腐蚀对外延层进行检测.     

插入δAl/AlN缓冲层在Si(111)上生长GaN

采用MOCVD(metal organic chemical vapor deposition)生长方法,对比在AlN层上加入δAl/AlN缓冲层和不加入δAl/AlN缓冲层两种生长结构,在Si(111)衬底上生长GaN.实验结果表明,在加入δAl/AlN缓冲层后,GaN外延层的裂纹密度得到了有效的降低,晶体质量也得到了明显的提高.通过MOCVD生长方法,利用光学显微镜、XRD和Raman等分析测试手段,研究了δAl/AlN缓冲层对GaN外延层的影响,获得了裂纹密度小、晶体质量高的GaN材料.     

插入δAl/AlN缓冲层在Si(111)上生长GaN

采用MOCVD(metal organic chemical vapor deposition)生长方法,对比在AlN层上加入δAl/AlN缓冲层和不加入δAl/AlN缓冲层两种生长结构,在Si(111)衬底上生长GaN.实验结果表明,在加入δAl/AlN缓冲层后,GaN外延层的裂纹密度得到了有效的降低,晶体质量也得到了明显的提高.通过MOCVD生长方法,利用光学显微镜、XRD和Raman等分析测试手段,研究了δAl/AlN缓冲层对GaN外延层的影响,获得了裂纹密度小、晶体质量高的GaN材料.     

6英寸硅基GaN HEMT外延材料的制备

采用金属有机物化学气相沉积(MOCVD)方法,在6英寸(1英寸=2.54 cm)Si(111)衬底上,使用多层不同Al摩尔组分的AlGaN插入层技术,成功生长出厚度为2.9 μm无裂纹(扣除边缘2mm)的GaN外延层,解决了大尺寸外延片的翘曲度问题,并在此基础上生长了全结构的高电子迁移率晶体管(HEMT)外延片.采用X射线双晶衍射对外延材料结构进行了表征.Hall测试结果表明,HEMT外延材料的迁移率为2 080 cm2/(V·s),方块电阻为279.8 Ω/□,电荷面密度为1.07×1013 cm-2.采用喇曼光谱仪对GaN的应力进行了表征,GaN的喇曼E2(h)峰位于567.02 cm-1,表面受到的张应力为0.170 6 GPa,由于GaN外延层受到的张应力很小,说明插入多层AlGaN后应力已经释放.汞探针C-V测试二维电子气浓度较Hall测试结果偏低,可能是在C-V测试时肖特基势垒接触会降低载流子浓度.     

引入GaN过渡层对Si（111）衬底上生长GaN外延的影响

本文研究了在Si(111)衬底上生长GaN外延层的方法。相比于直接在AlN缓冲层上生长GaN外延层,引入GaN过渡层显著地提高了外延层的晶体质量并降低了外延层的裂纹密度。使用X射线双晶衍射仪、光学显微镜以及在位监测曲线分析了GaN过渡层对外延层的晶体质量以及裂纹密度的影响。实验发现,直接在AlN缓冲层上生长外延层,晶体质量较差, X射线(0002)面半高宽最优值为0.686°,引入GaN过渡层后,通过调整生长条件,控制岛的长大与合并的过程,从而控制三维生长到二维生长过渡的过程,外延层的晶体质量明显提高, (0002)面半高宽降低为0.206°,并且裂纹明显减少。研究结果证明,通过生长合适厚度的GaN过渡层,可以得到高质量、无裂纹的GaN外延层。     

Effects of high-temperature AIN buffer on the microstructure of AlGaN/GaN HEMTs

Effects on AlGaN/GaN high-electron-mobility transistor structure of a high-temperature AlN buffer on sapphire substrate have been studied by high-resolution x-ray diffraction and atomic force microscopy techniques. The buffer improves the microstructural quality of GaN epilayer and reduces approximately one order of magnitude the edge-type threading dislocation density. As expected, the buffer also leads an atomically flat surface with a low root-mean-square of 0.25 nm and a step termination density in the range of 10⁸ cm^?2. Due to the high-temperature buffer layer, no change on the strain character of the GaN and AlGaN epitaxial layers has been observed. Both epilayers exhibit compressive strain in parallel to the growth direction and tensile strain in perpendicular to the growth direction. However, an high-temperature AlN buffer layer on sapphire substrate in the HEMT structure reduces the tensile stress in the AlGaN layer.     

<Emphasis Type="Italic">In Situ</Emphasis> Stress Measurements During GaN Growth on Ion-Implanted AlN/Si Substrates

In situ wafer curvature measurements were used in combination with postgrowth structural characterization to study the evolution of film stress and microstructure in GaN layers grown by metalorganic chemical vapor deposition on N⁺ ion-implanted AlN/Si (111) substrates. The results were compared with growth on identical unimplanted substrates. In situ stress measurements revealed that, for the unimplanted sample, the GaN initiated growth under compressive stress of −1.41 GPa which arose due to lattice mismatch with the AlN buffer layer. In contrast, GaN growth on the ion-implanted sample began at lower compressive stress of −0.84 GPa, suggesting a reduction in epitaxial stress. In both cases, the compressive growth stress was fully relaxed after ~0.7 μm and minimal tensile stress was generated during growth. During post-growth cooling, tensile stress was introduced in the GaN layer of both samples due to thermal expansion mismatch. Post-growth optical microscopy characterization, however, demonstrated that the ion-implanted sample had lower density of channeling cracks compared with the unimplanted sample. Cross-sectional transmission electron microscopy images of the sample grown on ion-implanted Si with no post-implantation nitrogen annealing revealed the formation of horizontal cracks in the implanted region beneath the AlN buffer layer. The weakened layer acts to decouple the GaN film from the Si substrate and thereby reduces the density of channeling cracks in the film after growth.     

Effect of AlN buffer thickness on GaN epilayer grown on Si(1 1 1)

We studied the influence of high temperature AlN buffer thickness on the property of GaN film on Si (1 1 1) substrate. Samples were grown by metal organic chemical vapor deposition. Optical microscopy, atomic force microscopy and X-ray diffraction were employed to characterize the samples. The results demonstrated that thickness of high temperature AlN buffer prominently influenced the morphology and the crystal quality of GaN epilayer. The optimized thickness of the AlN buffer is found to be about 150 nm. Under the optimized thickness, the largest crack-free range of GaN film is 10 mm×10 mm and the full width at half maximum of GaN (0 0 0 2) rocking curve peak is 621.7 arcsec. Using high temperature AlN/AlGaN multibuffer combined with AlN/GaN superlattices interlayer we have obtained 2 μm crack-free GaN epilayer on 2 in Si (1 1 1) substrates.     

Influence of AlN buffer layer thickness on the properties of GaN epilayer on Si(1 1 1) by MOCVD

The effect of thickness of the high-temperature (HT) AlN buffer layer on the properties of GaN grown on Si(1 1 1) has been investigated. Optical microscopy (OM), atomic force microscopy (AFM) and X-ray diffraction (XRD) are employed to characterize these samples grown by metal-organic chemical vapor deposition (MOCVD). The results demonstrate that the morphology and crystalline properties of the GaN epilayer strongly depend on the thickness of HT AlN buffer layer, and the optimized thickness of the HT AlN buffer layer is about 110 nm. Together with the low-temperature (LT) AlN interlayer, high-quality GaN epilayer with low crack density can be obtained.     

Analysis of the growth of GaN epitaxy on silicon

Due to the great potential of GaN based devices,the analysis of the growth of crack-free GaN with high quality has always been a research hotspot.In this paper,two methods for improving the property of the GaN epitaxial layer on Si (111) substrate are researched.Sample A,as a reference,only has an AlN buffer between the Si substrate and the epitaxy.In the following two samples,a GaN transition layer (sample B) and an AlGaN buffer (sample C) are grown on the AlN buffer separately.Both methods improve the quality of GaN.Meanwhile,using the second method,the residual tensile thermal stress decreases.To further study the impact of the two introduced layers,we investigate the stress condition of GaN epitaxial layer by Raman spectrum.According to the Raman spectrum,the calculated residual stress in the GaN epitaxial layer is approximately 0.72 GPa for sample B and 0.42 GPa for sample C.The photoluminescence property of GaN epitaxy is also investigated by room temperature PL spectrum.     

High quality AIN and GaN grown on compliant Si/SiC substrates by gas source molecular beam epitaxy

Epitaxial layers of AlN and GaN were grown by gas source molecular-beam epitaxy on a composite substrate consisting of a thin (250 nm) layer of silicon (111) bonded to a polycrystalline SiC substrate. Two dimensional growth modes of AlN and GaN were observed. We show that the plastic deformation of the thin Si layer results in initial relaxation of the AlN buffer layer and thus eliminates cracking of the epitaxial layer of GaN. Raman, x-ray diffraction, and cathodoluminescence measurements confirm the wurtzite structure of the GaN epilayer and the c-axis crystal growth orientation. The average stress in the GaN layer is estimated at 320 MPa. This is a factor of two less than the stress reported for HVPE growth on 6H-SiC (0001).     

Structural characterization of thick, high-quality epitaxial Ge on Si substrates grown by low-energy plasma-enhanced chemical vapor deposition

In this paper, we report on the growth of epitaxial Ge on a Si substrate by means of low-energy plasma-enhanced chemical vapor deposition (LEPECVD). A Si_1?xGe_x graded buffer layer is used between the silicon substrate and the epitaxial Ge layer to reduce the threading dislocation density resulting from the lattice mismatch between Si and Ge. An advantage of the LEPECVD technique is the high growth rate achievable (on the order of 40 Å/sec), allowing thick SiGe graded buffer layers to be grown faster than by other epitaxial techniques and thereby increasing throughput in order to make such structures more manufacturable. We have achieved relaxed Ge on a silicon substrate with a threading dislocation density of 1 × 10⁵ cm^?2, which is 4?10x lower than previously reported results.