传感器网络拥塞避免与控制的模糊AQM算法

传感器网络节点通信能力有限,当数据到达速率持续超过节点转发能力时网络会发生拥塞;传感器网络是任务型网络,对不同优先级的信息具有不同的服务质量要求.针对传感器网络信息传输的上述特性,提出了一种新的拥塞避免与控制算法FAQM（Fuzzy Active Queue Management）.该算法在综合考虑数据包的随机指数标记概率和优先级权值的基础上,建立了模糊逻辑推理系统,并以数据包丢弃因子作为参量来实现数据流的智能调控.NS2仿真实验结果表明：FAQM算法能减少高优先级数据包的丢弃率和节点间链路的时延,稳定节点队列长度,在有效避免与控制拥塞网络的同时提升网络整体QoS（Quality of Service）性能.     

一种基于QoS的空间延迟/中断容忍网络拥塞控制方法

为缓解网络拥塞对空间延迟/中断容忍网络产生的影响,该文提出一种基于QoS的网络拥塞控制算法。该算法包括接触拥塞判断和基于QoS的数据转发两种机制,分别从接触剩余可用容量和节点剩余存储空间两方面对每一段接触的拥塞程度进行预测,将接触划分为不同的拥塞等级。在计算路由时,以整段路径中所包含接触的最高拥塞等级为该路径的拥塞等级,并根据该拥塞等级发送不同优先级的数据。实验表明,基于QoS的拥塞控制算法可以提高低优先级数据的传递率并在节点存储空间不足时降低最高优先级数据的传递时延。     

基于REDP算法的动态QoS时延保障

针对无线多跳自组织网络中随机网络编码,之前提出了一种网络编码随机优先级检测调度算法(Random early detection with priority,REDP),对两条不同优先级的数据流建立Markov数学模型,推导出了引入REDP算法下数据流的单节点的时延数学表达式,该算法使得数据流能够根据自身优先级和拥塞程度调整丢包概率,从而主动丢弃数据包提前避免拥塞。文中将单节点时延问题拓展到多节点的网络拓扑结构中,提出了动态时延分配算法,该算法能够根据各个节点队列的缓存情况,动态调整各个节点的时延分配,仿真结果表明,动态时延分配算法能够实现实时数据流严格的Qo S时延保障,更利于视频、语音等实时业务流的传输。     

适合关键信息可靠传输的节点拥塞避免算法

无线传感器网络节点通信能力有限,有事件发生时,数据产生速率将急剧增大,网络可能会发生拥塞的问题,提出了一种适合关键信息可靠传输的节点拥塞避免算法CAARTKI (Congestion Avoidance Algorithm for Reliable Transmission of Key Information)。算法主要思想是通过引入区分服务,数据包按其重要性不同划分为不同的优先级,高优先级分组优先得到传输。本算法中,节点只有在下一跳节点为其分配了发送窗口才可以发送数据,以避免节点拥塞发生;在链路层考虑拥塞避免的同时,在路由层通过选择可用缓存空间多的邻居节点作为下一跳节点,使关键信息能及时可靠传输到负载较轻的节点,减少由于负载过重时重要信息不能及时传输的可能;在关键信息密集产生时,采用主动丢包策略,丢弃部分低优先级分组,为高优先级分组腾出缓存区间。NS2仿真实验结果表明:CAARTKI可预防拥塞的产生,最高优先级分组的丢包率低,平均网络时延较小,能保证关键信息的及时可靠传输。      

带区分服务扩展的802.11MAC 协议及其性能分析

提出了一种基于802.11MAC协议的扩展协议,为ad hoc网络的数据链路层提供区分服务的支持。该扩展协议通过引入新的控制分组,使接收节点可以拒绝发送节点的数据,从而确保了高等级的数据业务的优先权,同时避免了中间路由节点的拥塞。理论与仿真结果均表明,该扩展协议可以在负荷极重的条件下,提高高优先级数据流的接入概率,显著地降低高等级业务的端到端时延以及数据包丢弃率。     

基于自适应参数估值的DTN拥塞控制策略

提出基于自适应参数估值的DTN拥塞控制策略APE。APE利用节点本身的信息估算网络的平均延迟和平均跳数等参数,进而计算数据包的保存权值,在网络拥塞时优先丢弃保存权值低的数据包。仿真实验结果表明,与默认的丢弃缓存中最早接收包策略相比,APE较大幅度提升了网络交付率。     

基于马尔可夫相遇时间间隔的延迟容忍网络路由策略

在延迟容忍网络中,节点间的连接具有间断性和未知性,源节点和目的节点间不存在完整的通信路径,使得节点仅能通过移动获得的通信机会对待转发消息进行转发,易导致其转发成功率较低。对此,本文提出了基于马尔可夫相遇时间间隔预测的拥塞控制策略(CCSMP)主要是通过规定节点缓存的排队方式和丢弃机制,将预测得到的较早与目的节点相遇的报文排于队首,尽可能丢弃效用值较低的报文,进而解决由于节点缓存有限而带来的拥塞问题。     

Hadoop平台下一种改进蚂蚁算法的QoS路由研究

随着未来云计算的发展,各种云服务的应用将需要更高的网络性能。链路拥塞导致的数据包传输时延或数据包丢弃使得网络无法保障业务的QoS。目前普遍使用的链路状态路由算法不具有拥塞响应机制。本文通过在拥塞节点间发送连接蚂蚁寻找新路由来解决拥塞问题。NS2仿真结果表明,该算法能加快新的路由搜索,满足QoS的需求,并有效控制丢包率,时延等性能。     

基于LSTM模型的动态转发路由协议

文中将容忍延迟网络(Delay Tolerant Network,DTN)应用于船舶通信,提出了一种基于长短时记忆网络(Long Short-Term Memory,LSTM)模型的动态转发路由协议LSTM-DRA(Dynamic Distribution Routing Algorithm Based on LSTM Model),该协议通过比较相遇船舶的预计行驶轨迹来为消息选择最优的中继节点,并使用多副本的策略实现消息的动态转发。同时,采取了拥塞控制策略,以降低网络拥塞。仿真结果表明,LSTM-DRA在提高送达率和降低路由开销等方面具有较高的性能,可实现可靠、低成本的消息传输。     

基于无线传感器网络的跨层拥塞控制协议

无线传感器网络(WSN)中由拥塞引起的大量分组重传以及重传多次失败后的分组丢弃会导致较长的时延、较高的分组丢失率和较多的能量消耗.为了准确探测和控制网络拥塞,提出了一种基于跨层设计的拥塞控制协议,即上行拥塞控制(UCC)协议.该协议利用节点在媒质接人控制(MAC)层中未占用的缓冲器区间大小和所预测的通信流量作为该节点的...     

Technology innovation and process integrations for sub-100nm gate patterning

This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.     

White organic light-emitting devices based on fac tris（2- phenylpyridine） iridium sensitized 5,6,11,12-tetraphenylnap -hthacene

We have fabricated the white organic light-emitting devices （WOLEDs） based on 4,4＇ -bis（2,2 -diphenyl vinyl）-1,1＇ - biphenyl （DPVBi） and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene （rubrene）. The device structure is ITO/2T-NATA （20 nm）/NPBX （20 nm）/CBP： x%Ir（ppy）3：0.5% rubrene （8 nm）/NPBX （5 nm）/DPVBi （30 nm）/Alq（30 nm）/LiF（0.5 nm）/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris （2-phenylpyridine） iridium [Ir（ppy）3], acts as a yellow light-emitting layer, and N,N＇ -bis- （1-naphthyl）- N,N＇ -diphenyl -1, 1＇ -biphenyl-4,4＇ -diamine （NPBX） acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir （PPY）3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.     

Complete approach to automatic identification and subpixel center location for ellipse feature

To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.     

小角度扩展相关性近似算法分析

本论文提出一种在多天线MIMO信道相关性建模中小角度扩展近似理论算法,并应用于分析MIMO系统性能。分析中分别对三种不同角能量分布情况下的空间相关性研发快速近似计算法,并同时提出双模(Bi-Modal)角能量分布情况下的近似运算。通过分析这些新方法的近似效率,可以得到计算简单、复杂度低、而且符合实际的MIMO相关信道矩阵,对系统级的快速高效计算法的研究和系统级的评估以及误差分析具有重要的意义。     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

A Versatile Mixed-Signal Pin Approach for Cost-Effective Test of Automotive ICs

Integrated circuits (ICs) intended for increasingly sophisticated automotive applications bring unique test demands. Advanced ICs for applications such as highly integrated automatic braking system (ABS) and airbag controllers combine high voltage digital channels, significant VI demands and precise timing capability. Along with continued missioncritical reliability concerns, the trend toward higher voltage operation and increased device integration requires specialized test capabilities able to extend across the wide operating ranges found in automotive applications. Among these capabilities, automotive test requirements increasingly dictate a need for a cost-effective versatile mixed-signal pin electronics with very high data rates reaching up to 50MHz with a voltage swing of-2 V to +28 V.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

Optical vibration and deviation measurement of rotating machine parts

It is of interest to get appropriate information about the dynamic behaviour of rotating machinery parts in service. This paper presents an approach of optical vibration and deviation measurement of such parts. Essential of this method is an image derotator combined with a high speed camera or a laser doppler vibrometer （LDV）.