共查询到20条相似文献,搜索用时 156 毫秒
1.
本文分析了市话分局出局话务量(到其它市话分局的话务量)原有计算方法不足,在此基础上提出了一种新的计算方法即用户比例法,并对新、旧方法进行了分析对比。 相似文献
2.
本文在电路状态方程的求解之中引入了一种新的方法──精细计算法。该方法以解析法为基础,采用等时间步长对状态方程进行递推数值计算。它是一种半解析法,兼有解析法与数值法的优点,精度高,概念简单,便于编程,无条件稳定,且可采用较大的时间步长,所以计算效率高。 相似文献
3.
4.
(Sr,Pb)TiO3复合钙钛矿型铁电体的晶体结构 总被引:1,自引:1,他引:0
应用化学共沉淀法制备系列Pb/Sr比例的(Sr,Pb)TiO3粉末,标定了体材料的晶体结构,计算了材料的晶胞参数,给出了晶胞参数随Pb/Sr比例的变化规律。 相似文献
5.
船舶捷联式惯导系统中姿态矩阵算法研究 总被引:3,自引:0,他引:3
主要研究了捷联惯导系统中姿态矩阵的求解,实时计算等一系列问题,就实时性和计算等一系列问题,就实时性和计算精度对欧拉角法、四元数法和方向余弦法进行了理论上的分析和仿真,结果表明:四元数法在实时性,特别是计算精度方面要比其它两种方法高得多。 相似文献
6.
信息系统的模糊风险评估模型 总被引:21,自引:0,他引:21
提出了一种信息系统的综合风险评估模型。首先采用AHP(analytic hierarchy process)与模糊逻辑法相结合的方法进行风险评估,并根据信息系统风险评估的实际情况对2种方法进行了改造。应用模糊逻辑法对各个风险因素从概率方面、影响方面、不可控制性方面分别评价其重要度,利用AHP求出各个风险因素的风险值,通过比较各个因素的风险值,指出哪些风险需要采取措施加以控制。其次通过引进信息熵,求出各个风险因素在系统风险评估中所占的比例,可以计算整个系统的风险度,由此决定系统的总体风险水平。通过实例分析可知,该模型可以方便地用于信息系统风险评估,实验结果符合实际。 相似文献
7.
8.
本文用多种数值方法(积分插值法、有限元法及幂法)对具有渐变折射率分布的平面光波导率征方程进行了理论计算。这些方法不仅适用于任意的折射率分布,而且能够达到较高的计算精度。作为一个例子,作者对高斯分布波导进行了具体计算。计算结果表明,Arun Kumar等人用的微扰法是较好的方法。此外,本文作者通过迭代求出了更精确边界条件下的本征模。 相似文献
9.
电磁问题中几种减少计算时间的方法和比较性研究 总被引:2,自引:0,他引:2
在电磁理论问题的求解中,往往会遇到大系统问题,如何减少大系统问题的计算时间是一个具有共性的重要课题,本文对求解大系统问题的几秒方法进行了介绍和比较性研究,其中包括矩量法,网络分解法,矩阵分块法和空域分解法,文章在简述了这些方法的原理之后,给出了用上述方法以及用普通的矩量法计算同一问题的计算时间和储存量,并且比较了各种方法的特点。 相似文献
10.
对雷达网的探测效能进行了系统研究。确定了一套评价指标,建立了评价模型;对层次分析法的比例标度法的引入进行了初步探讨。并结合实际,给出了用比例标度法评价某雷达网探测效能的实例。 相似文献
11.
12.
A numerical method is formulated for the analysis of H -plane waveguide junctions with arbitrary cross sections. The junctions are loaded with arbitrarily shaped dielectric or ferrite. The method is a combination of the finite-element method and the boundary-element method, and is applied to the regions with and without dielectric or ferrite, respectively. To show the validity and usefulness of the method, a lossy dielectric post and a ferrite slab in a rectangular waveguide are investigated in detail, and the computed results are compared with earlier theoretical and experimental results 相似文献
13.
14.
S. A. Manenkov 《Journal of Communications Technology and Electronics》2018,63(6):512-520
The problem of calculation of eigenmode characteristics is considered for 3D open dielectric waveguides and waveguides with the anisotropic impedance boundary condition. An efficient algorithm is proposed for finding eigenmodes of waveguides having different cross-sections. It is based on the solution of the auxiliary problem of diffraction of the field of a filamentous source located inside the waveguide. The method is tested using weakly directing dielectric waveguides having circular and elliptical sections and a waveguide with the two-sheeted section. The results of calculation of dielectric waveguides obtained with the help of the proposed method, the method of finite elements, and the method of the integral equation over the waveguide section are compared. The circular and elliptical waveguides and the waveguide having a two-sheeted section with an anisotropic impedance are also investigated. The calculation results are compared with the results obtained with the use of the method of separation of variables and the Galerkin method. 相似文献
15.
An analysis method is presented for an arbitrarily shaped microstrip antenna with multiterminals. The method is based on the variational method and the modal-expansion technique. Eigenvalues and eigenfunctions are determined using the Rayleigh-Ritz method. Input impedance and other antenna parameters are derived at nonresonance. Furthermore, the network model, useful for the network analysis of a microstrip antenna with multiterminals, is presented by introducing an ideal transformer. Finally, numerical examples are compared with experimental results. The agreement is quite good, and the validity of the present method is confirmed. 相似文献
16.
17.
针对图像部分像素深度值失真,导致图像变形后物体边缘失真的问题,提出了一种引入“零视差缓冲”的方法。首先选取四幅具有不同复杂程度场景的图像,引入零视差缓冲对图像进行变形,其次采用传统图像质量评价体系(结构相似度SSIM和模糊系数K)对得到的图像进行质量评价,最后对比传统DIBR方法和引入零视差缓冲方法得到的视点图中物体边缘的表现。实验结果表明,该方法对于变形图像的SSIM平均提高了4.66%, K平均下降了1.73%。提高了视点图中物体边缘的质量,提高了3D图像的整体质量。 相似文献
18.
R. S. Chen D. X. Wang Edward K. N. Yung 《Journal of Infrared, Millimeter and Terahertz Waves》2003,24(7):1187-1202
The finite element method (FEM) combined with the perfectly matched layers (PML) is given for simulation of waveguide ferrite circulators. The generalized minimal residual (GMRES) iterative method is applied to solve such sparse large non-symmetric system of linear equations resulting from the use of edge-based finite element method. The formulation of FEM and the algorithm of GMRES method are described in detail. The reflection and insertion losses of millimeter wave waveguide circulator are analyzed and the results are compared with those obtained from literature. 相似文献
19.
高斯随机粗糙表面的电磁散射研究 总被引:2,自引:0,他引:2
本文利用数值方法研究高斯随机粗糙表面的电磁散射问题.应用矩量法研究高斯随机粗糙表面的电磁散射可以使我们获得较为精确的数值结果.但是,对于表面散射,应用矩量法时,表面未知变量的数目非常大,即使对于一维表面也需要几千个未知变量.当我们求解矩阵方程时,计算机对求解的问题有几个限制,一个是内存的限制,一个是速度的限制.为了克服内存的限制,发展了许多迭代数值算法.本文发展了一种新的数值迭代方法.利用这一方法,我们对高斯随机粗糙表面的电磁散射问题进行了研究,并与矩阵反演方法进行了比较.所得结果表明,这种新的迭代法具有很好的收敛性. 相似文献