参数不确定时滞系统的鲁棒P ID 控制

提出一种简单而有效的参数不确定时滞系统鲁棒PID控制器设计方法．通过在kp-ki平面上绘制稳定边界线,确定稳定的PID控制器参数区域;推导了一阶不稳定时滞系统PI控制器和PID控制器的存在性条件;基于推广到时滞系统的棱边定理,确定所有鲁棒PID控制器参数集．仿真实例表明了该方法的优越性．     

一种时滞过程内模PID控制器鲁棒整定方法

针对典型的一阶时滞（FOPTD）、二阶时滞（SOPTD）以及一阶时滞积分（FODI）过程,提出了一种简便的内模PID控制器设计和参数整定方法。 用一阶泰勒级数逼近系统模型的时滞项,导出内模PID控制器参数表达式,且仅有一个可调参数β,该可调参数与系统的动态性能和鲁棒性直接相关。基于控制系统的鲁棒性能指标给出了控制器可调参数β进行鲁棒整定的解析表达式。仿真结果表明,该方法可使系统同时获得良好的设定值跟踪特性、扰动抑制特性和克服参数变化的鲁棒性。        

基于GLBest-PSO算法的CSTR系统鲁棒PID控制

连续搅拌反应釜(CSTR)系统是一类具有多变量、强非线性和多工作点的复杂工业过程,对外界扰动及内部参数变化较为敏感。针对常规PID控制器参数整定困难,难以取得满意效果,本文提出了一种基于改进粒子群优化算法的CSTR系统鲁棒PID控制方法。通过对优化目标的分析,将鲁棒PID控制器的参数整定问题转化成一个求解最大-最小问题,在对粒子群优化算法进行改进的基础上,引入合作进化思想对该最大-最小问题进行求解,获得了基于优化性能指标最优的鲁棒PID控制器参数。针对实例的仿真结果表明,利用此方法整定得到的鲁棒PID控制器具有良好的鲁棒性,性能指标优于其它方法得到的鲁棒PID控制器,当过程对象操作范围发生大的变化时,利用本文方法设计得到的鲁棒PID控制器能获得满意的结果。     

间隙度量与跟踪系统中的鲁棒控制器设计

为定量研究鲁棒控制器允许对象有尽可能大的不确定性.在引入间隙度量的基础上,定义了跟踪系统鲁棒控制器的鲁棒边界,并对某跟踪系统设计了基于间隙度量的鲁棒控制器.该控制器能兼顾对象的不确定性与控制器的不确定性.由仿真结果可以看出,与普通的PID控制器相比,具有较大鲁棒边界的鲁棒控制器不仅具有较强的干扰抑制能力.而且能够在模型加性不确定性存在的情况下具有很好的跟踪性能.     

不确定性系统的自适应鲁棒跟踪控制

针对存在未知干扰和未建模动态等不确定性的系统的自适应鲁棒跟踪控制问题进行了 探讨.首选将l1优化控制器的有限拍设计方法结合给出了最优鲁棒稳态跟踪控制器的设计方法． 然后利用集员辨识的思想,将名义模型的参数和未建模动态及干扰的大小作为未知参数,提出了 一种递推参数估计方法.最后将上述研究结果结合起来提出了一种自适应鲁棒跟踪控制策略,证 明了自适应算法的全局收敛性并给出了鲁棒跟踪性能指标的一下较紧的上界.与现有的结果相 比,本文提出的自适应控制具有非保守的鲁棒稳定性,具有渐近最优的鲁棒跟踪性能.     

机器人鲁棒轨迹跟踪控制系统

根据鲁棒控制理论和机器人的动态特性,针对机器人系统中存在的不确定性因素,利用不确定性的上界设计了一种鲁棒控制器,并将之用于机器人的跟踪轨迹控制,给出了仿真实验结果并与PID控制的结果进行了比较,仿真实验结果表明所设计的鲁棒控制器与PID控制器相比,具有很好的动态特性和很强的鲁棒性。     

典型大时变时滞工业过程的鲁棒数字PⅡ调节控制

通过分析典型大时变时滞工业过程的特性,提出了一种新的数字PⅡ鲁棒调节控制器 的设计方法.应用这种数字鲁棒控制器,闭环系统可具有大时变时滞鲁棒镇定性,且完全抑制定 值负载干扰.数字仿真验证了该方法的有效性.     

具有输入时滞的不确定采样系统的鲁棒控制北大核心CSCD

针对具有输入时滞的结构不确定采样系统,研究了该类系统基于离散化模型的鲁棒控制器设计问题。通过将采样系统的连续的结构不确定对象离散化得到其近似模型,使具有输入时滞不确定采样系统的鲁棒控制器设计问题转换为讨论具有输入时滞的离散系统的鲁棒稳定性问题。利用Lyapunov函数的构造及解析技巧,给出了基于线性矩阵不等式(LMI)的输入时滞离散系统的鲁棒稳定性条件,并在此基础上将控制器参数化,得到了一个通过求解线性矩阵不等式(LMI)来获得采样系统鲁棒控制器的设计方法,所设计的控制器保证了系统的鲁棒稳定性,对结构摄动有着较好的鲁棒性能。最后,通过数值计算仿真验证了本文方法的可行性。     

具有输入时滞的不确定采样系统的鲁棒控制

针对具有输入时滞的结构不确定采样系统,研究了该类系统基于离散化模型的鲁棒控制器设计问题。通过将采样系统的连续的结构不确定对象离散化得到其近似模型,使具有输入时滞不确定采样系统的鲁棒控制器设计问题转换为讨论具有输入时滞的离散系统的鲁棒稳定性问题。利用Lyapunov函数的构造及解析技巧,给出了基于线性矩阵不等式(LMI)的输入时滞离散系统的鲁棒稳定性条件,并在此基础上将控制器参数化,得到了一个通过求解线性矩阵不等式(LMI)来获得采样系统鲁棒控制器的设计方法,所设计的控制器保证了系统的鲁棒稳定性,对结构摄动有着较好的鲁棒性能。最后,通过数值计算仿真验证了本文方法的可行性。     

区间时滞相关离散非线性系统的鲁棒模型预测控制

针对一类带有扰动、输入约束和凸多面体不确定性的区间时滞离散非线性系统, 提出一种鲁棒模型预测控制方法. 一方面, 利用min-max 模型预测控制求解鲁棒模型预测控制器, 以研究鲁棒预测控制在范数有界意义下的扰动抑制问题; 另一方面, 充分利用时滞的上下界信息构造Lyapunov 函数以得到控制器存在的充分条件. 最后给出了闭环系统鲁棒稳定性证明.     

Time‐varying input delay compensation for nonlinear systems with additive disturbance: An output feedback approach

This paper addresses the output feedback tracking control of a class of multiple‐input and multiple‐output nonlinear systems subject to time‐varying input delay and additive bounded disturbances. Based on the backstepping design approach, an output feedback robust controller is proposed by integrating an extended state observer and a novel robust controller, which uses a desired trajectory‐based feedforward term to achieve an improved model compensation and a robust delay compensation feedback term based on the finite integral of the past control values to compensate for the time‐varying input delay. The extended state observer can simultaneously estimate the unmeasurable system states and the additive disturbances only with the output measurement and delayed control input. The proposed controller theoretically guarantees prescribed transient performance and steady‐state tracking accuracy in spite of the presence of time‐varying input delay and additive bounded disturbances based on Lyapunov stability analysis by using a Lyapunov‐Krasovskii functional. A specific study on a 2‐link robot manipulator is performed; based on the system model and the proposed design procedure, a suitable controller is developed, and comparative simulation results are obtained to demonstrate the effectiveness of the developed control scheme.     

PI tracking control for nonlinear time-varying delay Markov jump systems

This paper considers robust stochastic stability and PI tracking control problem for Markov jump systems with both input delay and an unknown nonlinear function. Based on the traditional PI control strategy, a new controller design scheme is proposed for nonlinear time-delay Markov jump systems which can realize multiple control objectives including robust stochastic stability and tracking performance. By using the Lyapunov stability theory and LMI algorithms, a sufficient condition for the solution to robust stochastic stability and tracking control problem is obtained. Then, the desired controller with PI structure is designed, which ensures the resulting closed-loop system is robust stochastically stable and the system state has favorable tracking performance. Finally, a numerical example is provided to illustrate the effectiveness of the proposed results.     

Tracking Control of Uncertain Nonlinear Systems With Unknown Constant Input Delay

A robust delay compensator has been developed for a class of uncertain nonlinear systems with an unknown constant input delay.The control law consists of feedback terms based on the integral of past control values and a novel filtered tracking error,capable of compensating for input delays.Suitable Lyapunov-Krasovskii functionals are used to prove global uniformly ultimately bounded(GUUB)tracking,provided certain sufficient gain conditions,dependent on the bound of the delay,are satisfied.Simulation results illustrate the performance and robustness of the controller for different values of input delay.     

Robust output tracking control for discrete-time nonlinear systems with time-varying delay: Virtual fuzzy model LMI-based approach

This paper proposes an output tracking control via virtual reference model for a class of nonlinear discrete-time systems with time-varying delay and disturbance. First, a Takagi–Sugeno (T–S) fuzzy model represents the discrete-time nonlinear system with time-varying delay. Second, a fuzzy observer design estimates immeasurable state. Third, a virtual desired variable (VDV) based tracking controller design guarantees H_∞ control performance for the overall system. Using Lyapunov’s stability analysis, we obtain sufficient conditions for stability of estimation, control, and robustness. The advantages are as follows: (i) allow unknown time-varying delay; (ii) ensure robust output tracking; (iii) provide relaxed conditions via a three-steps procedure to find observer and controller gain. To verify the theoretical derivation, we carry out numerical simulations on a stirred tank reactor system as an example. Satisfactory results validate the claims.     

控制受限的移动机器人鲁棒跟踪控制器设计

研究了非完整移动机器人动力学模型中带有参数不确定和控制受限的鲁棒轨迹跟踪控 制器的设计问题.在建立移动机器人的全动态误差模型的基础上,应用滚动时域控制(RHC)和线 性矩阵不等式(LMIs)方法,设计了鲁棒跟踪控制器,在满足非完整和控制约束的条件下,实现了 机器人位置,导向角以及速度的同时渐近跟踪.系统稳定性的充分条件以LMI的形式给出.仿真 结果验证了提出方法的可行性和有效性.     

Robust Tracking Control Of The Variable Stiffness Actuator Based On The Lever Mechanism

This paper is concerned with the design of a robust adaptive tracking control scheme for a class of variable stiffness actuators (VSAs) based on the lever mechanisms. For these VSAs based on the lever mechanisms, the AwAS‐II developed at Italian Institute of Technology (IIT) is chosen as the study object, and it is an enhanced version of the original realization AwAS (actuator with adjustable stiffness). Firstly, for the dynamic model of the AwAS‐II system in the presence of parametric uncertainties, unknown bounded friction torques, unknown bounded external disturbance and input saturation constraints, by using the coordinate transformations and the static state feedback linearization, the state space model of the AwAS‐II system with composite disturbances and input saturation constraints is transformed into an uncertain multiple‐input multiple‐output (MIMO) linear system with lumped disturbances and input saturation constraints. Subsequently, a combination of the feedback linearization, disturbance observer, sliding mode control and adaptive input saturation compensation law is adopted for the design of the robust tracking controller that simultaneously regulates the position and stiffness of the AwAS‐II system. Under the proposed controller, the semi‐global uniformly ultimately bounded stability of the closed‐loop system has been proved via Lyapunov stability analysis. Simulation results illustrate the effectiveness and the robustness of the proposed robust adaptive tracking control scheme.     

Prediction‐based Adaptive Robust Tracking Control of an Uncertain First‐Order Time‐Delay System

This paper considers the tracking problem of a delayed uncertain first‐order system which is simultaneously subject to (possibly large) known input delay, unknown but bounded time‐varying disturbance, and unknown plant parameter. The proposed predictor adaptive robust controller (PARC) involves prediction‐based projection type adaptation laws with model compensation and prediction‐based continuous robust feedback such that the closed loop system has global exponential convergence with an ultimate bound proportional to delay, disturbance bound, and switching gain. Further, if there are only delay and parameter uncertainties after some finite time, then semi‐global asymptotic tracking is guaranteed. The proposed design is shown to have significant closed loop performance improvement over the baseline controller.     

Approximate trajectory tracking of input‐disturbed PVTOL aircraft with delayed attitude measurements

In this paper, we address the flight‐trajectory tracking problem of an input‐disturbed planar vertical take‐off and landing (PVTOL) aircraft with delayed attitude measurements. By applying the first‐order Padé approximation to deal with the time delay functions, the problem is reduced to the output tracking of a new non‐minimum‐phase system without delay. A tracking controller, consisting of a linear static‐state feedback term, a switching control term and a nonlinear auxiliary input term, is proposed for robust stabilization of the output‐tracking errors together with the internal dynamics. Numerical simulations are performed to show the main results. Copyright © 2009 John Wiley & Sons, Ltd.     

Force Reflecting Bilateral Control of Master–Slave Systems in Teleoperation

In this paper, a simple structure design with arbitrary motion/force scaling to control teleoperation systems, with model mismatches is presented. The goal of this paper is to achieve transparency in presence of uncertainties. The master–slave systems are approximated by linear dynamic models with perturbed parameters, which is called the model mismatch. Moreover, the time delay in communication channel with uncertainties is considered. The stability analysis will be considered for two cases: (1) stability under time delay uncertainties and (2) stability under model mismatches. For the first case, two local controllers are designed. The first controller is responsible for tracking the master commands, while the second controller is in charge of force tracking as well as guaranteeing stability of the overall closed-loop system. In the second case, an additional term will be added to the control law to provide robustness to the closed-loop system. Moreover, in this case, the local slave controller guarantees the position tracking and the local master controller guarantees stability of the inner closed-loop system. The advantages of the proposed method are two folds: (1) robust stability of the system against model mismatches is guaranteed and (2) structured system uncertainties are well compensated by applying independent controllers to the master and the slave sites. Simulation results show good performance of the proposed method in motion tracking as well force tracking in presence of model mismatches and time delay uncertainties.     

步进梁加热炉神经网络模型预测控制

针对步进梁式连续加热炉燃烧过程控制的温度分布非线性和滞后性,提出了一种基于非线性优化技术的神经网络模型预测控制算法。神经网络具有强大的自学习和非线性映射能力,把神经网络预测模型和非线性优化器整合为一个温度控制器,通过神经网络预测模型描述温度控制对象的动态行为,根据加热炉当前温度和出钢温度预测未来时刻的温度输出值,实现加热炉温度控制。实验结果表明,通过对网络模型进行大样本训练和对模型预测控制参数的优化,加热炉温度控制系统能快速达到控制要求,具有良好的抗干扰能力和温度跟随性能。