新型杂环氯代聚芳醚的合成与性能

以自制的新型氯代类双酚化合物4-(3-氯-4-羟基苯基）-2,3-二氮杂萘-1-酮（OC-HPPZ）为单体,分别与4,4/-二氟二苯酮、4,4/-二氯二苯砚和1,4-双-（4-氯代苯甲酰基）苯进行缩聚反应,合成了一类新型的具有较高分子质量的聚芳醚材料。利用FTIR、1H NMR等分析手段研究了类双酚化合物OC-HPPZ及其聚合物的结构;采用差示扫描量热仪（DSC）、热重分析仪（TGA）研究了聚合物的耐热性能,结果表明,新型聚芳醚砜、聚芳醚酮和聚芳醚酮酮具有优异的耐热性能和热稳定性能,其玻璃化转变温度为234～287℃,在氮气氛中5%热失重温度均高于420℃,新型氯代聚芳醚在氯仿、N、N-二甲基乙酰胺等极性有机溶剂中可溶解并浇铸得到透明、韧性的薄膜。     

新型可溶性聚芳醚腈酮的合成及其在绝缘漆领域的应用

以4种含杂萘联苯结构的类双酚单体分别与2,6-二氯苯腈、4,4-二氟酮进行亲核缩聚反应,制备了一系列新型含杂萘联苯结构的聚芳醚腈酮树脂.研究了不同类双酚单体结构对聚合物性能的影响.所制备聚合物均具有较高的分子量,特性粘度在0.50dL/g以上,可溶解于N-甲基吡咯烷酮(NMP),N,N-二甲基乙酰胺(DMAc),氯仿等极性非质子型有机溶剂中.聚合物的结构以FT-IR进行表征;利用差示扫描量热仪(DSC)和热重分析仪(TGA)研究了聚合物的耐热性能,结果表明,该类聚芳醚腈酮树脂具有优异的耐热性能,玻璃化转变温度(Tg)在255～277℃之间,10%热失重温度(Td)在498℃以上.由该系列聚芳醚腈酮材料制成的绝缘漆具有良好的电绝缘性能,较高的机械强度,良好的柔韧性和附着力.     

聚芳醚砜醚酮共聚物的合成与表征

通过低温溶液亲电共缩聚合成了聚芳醚醚酮醚砜醚酮(Ia)、聚芳醚酮酮醚砜醚酮(Ib),甲基取代、双邻位甲基取代的聚芳醚酮酮醚酮醚砜醚酮(Ic、Id)等4种结构新型的共聚物。用傅里叶红外光谱仪(FT-IR)、核磁共振(1H-NMR)、差示扫描量热仪(DSC)、热重分析(TGA)、X射线衍射仪(WAXD)对聚合物进行了结构表征和性能测试。结果表明,共聚物有较高的玻璃化转变温度(Tg)177℃~188℃;较高的热分解温度(Td5%≥460℃),共聚物能溶解于N-甲基-2-吡咯烷酮,四氯乙烷和浓硫酸中;甲基取代的共聚物溶解性得到了明显改善,室温下还能溶于二氯甲烷、二氯乙烷、氯仿、N,N-二甲基甲酰胺、N,N-二甲基乙酰胺中。     

几种甲基取代的新型可溶性聚芳醚酮醚砜醚酮的合成与表征

在无水A lC l3及DM F存在下,将4,4′-二(4-氯甲酰苯氧基)二苯砜(SPC l)、4,4′-二(3-氯甲酰苯氧基)二苯砜(SM C l)分别与2-甲基二苯醚(o-M DPE)和3-甲基二苯醚(m-M DPE)在1,2-二氯乙烷中进行低温溶液缩聚,合成了4种新型可溶性的甲基取代聚芳醚酮醚砜醚酮(M-PEKESEK)。DSC,TG,FT-IR及W AXD等测试表明,4种聚合物均为无定型结构,其玻璃化转变温度(Tg)介于157℃~167℃,在氮气气氛中5%的热失重温度(Td)均在465℃以上,易溶于氯仿和DM F、DM SO等强极性非质子有机溶剂中。     

含二氮杂萘酮和萘结构聚芳醚酮的研究

以4-（4-羟基苯基）-2,3-二氮杂萘-1-酮与1-氯-4-（4-氯苯甲酰基）萘单体经亲核取代反应,合成了含二氮杂萘酮和萘结构的聚芳醚酮。用FT-IR、∧1H-NMR、DSC、TG、WAXD等方法对聚合物进行了表征,研究了聚合物的溶解性能。结果表明,该聚芳醚酮是一种耐热等级高的可溶性无定形聚合物。     

二甲基杂萘联苯聚醚砜的合成与表征

以新型类双酚单体４－（２,６－二甲基－４－羟基苯基）－２,３－二氮杂萘－１－酮,与４,４′－二氯二苯砜反应,合成了一种新型聚芳醚砜,对其聚合条件作了初步探讨;并利用核磁共振、红外光谱分析研究了双酚单体及聚合物的结构,利用ＤＳＣ、ＴＧＡ对聚合物的耐热性进行了分析。实验结果表明,该类双酚单体具有与双酚类似的活必珂以进行聚合反应。     

含萘环新型聚芳醚酮砜的合成与表征

以4,4′-二(β-萘氧基)二苯砜(BNODPS),2,5-二氯对苯二甲酰氯(DCTPC)和二苯醚(DPE)为单体,通过亲电缩聚反应,合成了一系列主链含萘环的新型聚芳醚酮砜.经IR、DSC和WAXD等方法对共聚物的研究表明,随着BNODPS结构单元含量的增加,共聚物的玻璃化温度(211～224 ℃)和溶解性逐渐提高,而其熔融温度、结晶度和热分解温度均逐渐下降,但仍具有较高的耐热性.     

含醚键双二氮杂萘酮结构聚芳醚腈砜的合成与性能

文中以含醚键双二氮杂萘酮结构化合物4,4’-双(氧基(1,4-苯撑))-双二氮杂萘-1(2H)酮-二苯醚(OBDHPZ)为类双酚单体,与4,4’-二氟二苯砜(DFS)和2,6’-二氟苯腈(DFBN)进行高温溶液缩聚反应,通过调节聚合物分子主链中砜基和氰基等的含量,合成了一系列不同腈砜比的含醚键双二氮杂萘酮联苯结构聚芳醚腈砜树脂(PBPENS),其N-甲基吡咯烷酮(NMP)溶液在25℃的特性黏度为0.63～0.90 dL/g。通过红外光谱、核磁共振氢谱和广角X射线衍射仪表征了所合成聚芳醚腈砜的结构;通过差示扫描量热仪和热失重分析仪分析了该类聚芳醚腈砜的热性能,聚合物的玻璃化转变温度(T_g)在322～325℃,5%热失重温度(T_d5%)在485～500℃。该类聚合物在常温时可溶解于NMP、N,N-二甲基乙酰胺(DMAc)、氯仿等极性非质子有机溶剂;采用溶液浇筑法制备了含醚键双二氮杂萘酮结构聚芳醚腈砜薄膜,薄膜的拉伸强度可以达到56～65 MPa。     

含甲基侧基聚芳醚砜醚酮酮的合成与表征

用邻甲酚或间甲酚与4,4‘-二氯二苯砜合成2,2‘-二甲基-4,4‘-二苯氧基二苯砜(o-CH3-DPODPS)或3,3‘-二甲基-4,4‘-二苯氧基二苯砜(m-CH3-DPODPS),然后与对苯二甲酰氯(TPC)或间苯二甲酰氯(IPC)进行缩聚,得到一类新型含甲基侧基的聚芳醚砜醚酮酮聚合物.用FT-IR,^1H-NMR,DSC,TGA,X-ray等方法对单体和聚合物进行表征.结果表明,这种可溶性的非晶态聚合物具有较高的玻璃化转变温度Tg和较好的耐热性能.     

含1-(萘-1-磺酰基)萘结构聚芳醚的合成及表征

以氯苯、α-氯代萘、氯磺酸、二氯亚砜为原料,合成了4-氯-1-萘磺酰氯,经Frield-Craft磺酰基化反应,合成了含两个1,4-萘结构的4-氯-1-(4′-氯-1-萘磺酰基)萘(CCNSN)。CCNSN分别与双酚A、酚酞、对苯二酚及4-(4-羟基苯基)-2,3-二氮杂萘-1-酮经溶液亲核取代逐步聚合反应,合成了4种含1-(萘-1-磺酰基)萘结构的聚芳醚(Pa~Pd)。用NMR、FT-IR对单体和聚合物进行了表征,证明其结构正确;用DSC、TGA和WAXD等方法对聚合物的热性能及结晶性进行了表征,结果表明,聚合物的玻璃化转变温度在226℃~318℃之间,氮气环境下,5%热失重的起始温度均在450℃以上,说明具有良好的热稳定性;考察了聚合物的溶解性能,除Pc不溶于常见的有机溶剂外,Pa、Pb、Pd皆可溶于氯仿(CHCl3)、1,1,2,2-四氯乙烷(TCE)和N,N-二甲基乙酰胺(DMAC)、N-甲基吡咯烷酮(NMP)等非质子极性溶剂。     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.     

Study on Bond Ability of Arc-Spraying Coatings with Different Surface Pretreatment on Cast-Iron

Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting.     

Structural Characteristics of TiO2 Ceramic Coating by Micro-Plasma Oxidation

TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure.     

Evaluation of fatigue life of steel using steel grain size

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.