Thiol-Functionalized Covalent Organic Frameworks as Thermal History Indictor for Temperature and Time History Monitoring

Various products, including foods and pharmaceuticals, are sensitive to temperature fluctuations. Thus, temperature monitoring during production, transportation, and storage is critical. Facile indicators are required to monitor temperature conditions via color changes in real time. This study aimed to prepare and apply thiol-functionalized covalent organic frameworks (COFs) as a novel indicator for monitoring thermal history and temperature abuse. The COFs underwent obvious color changes from bright yellow to purple after exposure to different temperatures for varying durations. The reaction kinetics are analyzed under isothermal conditions, which reveal that the order of reaction rates is k_−20°C < k_4°C < k_20°C < k_35°C < k_55°C. The activation energy (E_a) of the COFs is calculated using the Arrhenius equation as 50.71 kJ moL⁻¹. The COFs are capable of sensitive color changes and offer a broad temperature tracking range, thereby demonstrating their application potential for the monitoring of temperature and time exposure history during production, transportation, and storage. This excellent performance thermal history indicator also shows promise for expanding the application field of COFs.     

Deformation behaviour of iron-doped alumina

Compressive creep tests in air were carried out on 1 cat.% Fe-doped alumina at a temperature T=1400 °C. Iron doping affected the plastic deformation by different ways in relation with Fe²⁺ cations population. Fe²⁺ cations sped up the deformation rates. FeAl₂O₄ spinel precipitates were identified and they were found (i) to interact with alumina grain boundaries (ii) to limit the grain growth within a range of strain. The Fe²⁺ cations underwent oxidation and this resulted in the dissolution of the some precipitates and in the decrease of deformation rates. It was suggested that deformation sped up this evolution through mass transport and that time was not a dominating parameter.     

高效液相法测定鹅肥肝和鹅肝酱中维生素A

研究了运用高效液相法检测鹅肥肝和鹅肝酱中VA的方法。通过比较3种不同的处理样品方法，选择了其中较为快速、准确的处理方法。实验测定回收率为98．21％，鹅肥肝和鹅肝酱测定的变异系数分别为0.44％和1.14％。     

超高压改性对鸡蛋蛋白液起泡及物理性质的影响

采用超高压改性鸡蛋蛋白液,研究了压力、保压时间对蛋白液起泡性质和物理性质的影响结果表明,新鲜蛋白液在350MPa的静水压下处理15min后的起泡性质最好．此外,超高压改性还导致蛋白液的黏度和表面张力呈现升高后又急剧降低的趋势,并能够降低蛋白液的明度.     

大孔树脂吸附分离红花红色素的研究

采用大孔吸附树脂对红花红色素进行精制,并对大孔吸附树脂进行了优选;研究了不同条件下X－5树脂对红花红色素的吸附和解吸性能．结果表明：X－5树脂对红花红色素具有良好的吸附和解吸性能,其吸附效果在室温、pH7．0～9．0的条件下较好;采用pH7．0～9．0、60％乙醇溶液进行洗脱,解吸效果较好．     

氧化鸡肉脂肪制备肉味香精前体物质的研究

研究以鸡肉脂肪为主要原料制备肉味香精的前体物质,通过单因素和正交试验确定氧化反应的最佳反应条件.结果表明氧化鸡肉脂肪的最佳条件是:氧化温度为120℃,氧化时间为3h,VE的添加量为1.0%,不添加水和NaCl.在最优条件下进行氧化试验,得到产物的酸值和过氧化值分别为1.472 mg/g和193.51 mmol/kg,感官评价值为4.905,具有典型特征的鸡肉香气.     

酶促速熟过程中腐乳成分及微观结构的分析

通过研究酶促腐乳在成熟过程中的色度、蛋白质水解程度、微观结构的变化,分析添加酶制剂促熟对腐乳品质及微观结构的影响．利用扫描电子显微镜研究酶促速熟过程中腐乳的微观结构变化,通过电泳分析腐乳的蛋白质水解情况,采用中红外扫描研究酶促腐乳的成分,并与利民红方腐乳（对照样）进行对比．结果表明,酶促速熟腐乳的颜色、微观结构、蛋白水解度以及组成成分均与传统工艺生产的利民红方腐乳（对照样）基本相同,证明腐乳的加酶促进其成熟方法的可行性．     

重组质粒pMG36e-nisI-gfp在乳酸菌中的应用

本研究将带有nisI和咖（绿色荧光蛋白）基因的乳酸菌表达载体pMG36e-nisI-gfp转化至乳酸菌中,观察其在宿主内的稳定性．对重组菌进行了菌体形态、传代培养、质粒验证等研究,考察了该质粒的稳定性．结果显示：重组菌在不含抗生素的培养基中连续传代20代后,质粒丢失率低;菌体大小和形态基本不变;质粒经HindⅢ酶切后大小不变;GFP在第0、5、10、15和20代宿主菌中都可以表达,表达量没有明显差别,在SDS-PAGE中的带型一致;初步的动物实验验证了该质粒作为遗传标记的应用效果．说明该质粒在宿主菌中具有良好的稳定性．