共混合金力学性能的研究 Ⅲ.CPP对PVC共混体系力学性能的影响

将ＰＰ氯化后作为ＰＶＣ共混体系的刚性体分散相，旨在改善高分子合金的相容性，ＤＳＣ实验表明，ＣＰＰ（氯化聚丙烯）与ＰＶＣ的相容性比ＰＶＣ与ＰＰ的好。在用弹性体增韧的ＰＶＣ／ＣＰＥ和ＰＶＣ／ＡＢＳ共混体系中加入刚性体ＣＰＰ后，随着ＣＰＥ、ＡＢＳ用量的增加，共混合金的冲击强度增加，并且由刚性的ＣＰＰ的加入所产生的冲击强度最大值的幅度也有所提高，其趋势是ＣＰＥ、ＡＢＳ用量越多，共混合金冲击强度值达到最大值时所需ＣＰＰ的量越多，增加的幅度也越大。ＣＰＰ对共混合金的拉伸屈服强度和断裂伸长率的影响比较小。     

A new approach to the decomposition of Boolean functions by the method of <Emphasis Type="Italic">q</Emphasis>-partitions. III. Joint decomposition of a function system

The paper considers the set-theoretical approach to the joint decomposition of systems of Boolean functions of variables specified in different representation forms. The approach is based on the method of q-partitions of conjuncterms and concept of decomposition clones. Theorems on joint decomposition of a system of full and partial functions are formulated. The approach is illustrated by examples. Parts I and II of this article are published in No. 5 (2001) and No. 1 (2002). __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 39–58, March–April 2007.     

试论开关电源的电磁干扰

开关电源因体积小、功率因数较大等优点而在通信、控制、计算机等领域广泛应用,但其产生的电磁干扰在一定程度上限制了它的使用。文中简单介绍了开关电源电磁干扰的相关概念,分析了开关电源电磁干扰产生的机理,介绍了实施开关电源电磁兼容的方法,并结合实际实用,介绍了开关电源目前常用的抑制干扰的具体措施。     

掏挖与岩石锚杆复合型基础上拔承载机理和影响因素研究

针对掏挖与岩石锚杆复合型基础上拔承载机理不明确的问题,基于现场试验工况,利用Plaxis3D有限元软件建立复合型基础抗拔承载模型,研究其上拔承载机理。在此基础上,研究了土体弹性模量、岩体弹性模量、土体黏聚力对复合型基础各部分的承载影响,分析了掏挖基础和岩石群锚基础的承载力发挥情况、上拔变形、塑性区开展,并给出了复合型基础的改进方案。结果表明:上拔变形刚度较大的岩锚基础对复合型基础的承载极限状态起控制作用;掏挖基础和岩石锚杆基础的上拔变形协调性是影响复合型基础承载力发挥的关键;适当增加掏挖基础嵌入岩石的深度可有效提高复合型基础的抗拔承载力。     

Radiation-induced modification of polyurethane with hydroxyethyl methacrylate: blood compatibility

An attempt is made to develop the hydrophilic grafting of polyether urethane urea with hydroxyethyl methacrylate (hema) using⁶⁰Coγ-irradiation for achieving optimum hydrophilic/hydrophobic property needed towards blood compatibility. Contact angle method and platelet adhesion from calf’s blood are used to determine the suitability of these modified surfaces.     

基于截面特征相容的曲面约束重构

为了从点云中重建高品质的曲面模型,提出一种基于截面特征相容的曲面重构方法.该方法将由点云切片获取的截面曲线分层次表达为直线、圆弧、B样条等基本曲线元和特征点的集合,并基于曲线微分几何属性,建立截面曲线特征点对应的数学模型,采用动态规划法求解并确定其初始对应关系,以曲线元特征匹配准则优化对应,逐步确立截面曲线间的特征对应关系,将特征对应关系映射为参数对应即可利用成熟算法逼近生成蒙皮曲面.实例表明,该算法获取的曲面模型不但满足精度和光顺性要求,而且忠实地反映了原始物理样件所蕴含的特征信息.     

径向可开启板式结构几何协调性研究

介绍了一种新型开合结构--径向可开启板式结构.针对它在几何协调性方面存在的缺陷,分析了这种结构的基本构成并给出基本几何方程;运用欧式几何分析方法研究了开启时具有圆形开口的结构各单元之间的拓扑关系,得到了临界方程和限制方程,据此绘制了一些常用参数下的临界曲线和限制曲线,以便设计者选用;给出了两种开启时可形成梅花形开口或多边形开口的新型结构,解决了特定参数下屋面设计的几何协调性问题.研究结果为径向可开启板式结构的设计提供了有价值的参考.     

变频调速传动系统的电磁兼容分析

在变频调速传动系统中,变频器会产生和受到各种电磁干扰。本文分析了变频调速传动系统的主要电磁干扰源和耦合途径,并阐述了抑制其电磁干扰的措施。     

Structure and blood compatibility of tetrahedral amorphous hydrogenated carbon formed by a magnetic-field-filter plasma stream

Tetrahedral amorphous hydrogenated carbon (ta-C:H) films with various substrate bias voltages were prepared using a magnetic-field-filter plasma stream deposition system. The microstructural and optical properties were studied using ellipsometric spectra. The refractive index n of each sample was obtained by simulating their ellipsometric spectral using Tauc-Lorentz oscillator model, and then the relative sp³ C ratio of each sample was calculated using Bruggeman effective medium approximation. The sp³ C fraction of each sample was quantified by using electron energy-loss spectroscopy (EELS). The blood compatibility of the samples was evaluated by tests of platelet adhesion, kinetic clotting time and thrombin time. The quantity and morphology of the adherent platelets on the surface of these samples were investigated using scanning electron microscopy. Results show that the spectroscopic ellipsometry is a helpful method to evaluate the sp³ carbon fraction of the carbon films. The substrate bias voltage has an obvious effect on sp³ content and blood compatibility of ta-C:H films. The sample prepared with substrate bias voltage of − 20 V showed the best blood compatibility. A simple bio-physical hypothetical model was proposed to explain the experiment results.     

国内弧焊设备电磁兼容性研究进展

焊弧设备的电磁兼容性问题日益突出，受到越来越多的关注。针对我国的实际情况，对国内弧焊设备的研究现状进行了综合分析，同时指出了今后的研究方向。