无纵向电场分量离子波纹激光的小信号增益

在离子波纹摆动器中，改变电子束的入射方向，保证了离子波纹场的纵向分量为零，从而消除了纵向电场对离子波纹激光的不利影响。给出了束电子的运动轨迹，运用Madey定理计算了小振幅条件下该离子波纹激光的小信号增益。     

1.8 V千兆以太网接收器模拟前端预均衡电路

介绍了一种用于1.8 V电源电压下的千兆以太网接收器的模拟前端预均衡电路。电路分为三个部分:预处理电路、基带漂移补偿电路和可变增益放大电路,主要实现回波消除、基带漂移补偿和电路增益自动控制等功能。为了与百兆模式兼容,提出了一种预处理电路。仿真结果表明,该电路可以很好地实现回波消除的功能,能够对由于基带漂移引起的信号失真给以补偿,可以提供16级不同的增益,并进行频率补偿。电路采用0.18μm标准CMOS工艺实现。     

On a large-gain theorem

The aim of this paper is to give a general quantitative requirement which the loop gain must satisfy in order to stabilize a given unstable (possibly nonlinear and time-varying) plant, namely that the gain must exceed one.     

一类非线性MIMO不确定系统的动态输出反馈镇定

考察其标称系统的相对阶大于{1,1,…,1}同时含匹配和非匹配不确定性的MIMO 非线性系统的动态输出反馈镇定问题.文中直接用Lyaunov方法构造一类输出反馈动态补 偿器,该补偿器可以实现对所论非线性不确定系统的动态输出反馈渐近镇定.     

Quantitative feedback theory with applications in welding

Two different control systems were developed using quantitative feedback theory for weld quality improvement. The first application to be discussed was designed for the resistance pinch welding process and uses electrode displacement and force as feedback parameters. A correlation between weld quality and electrode displacement is established for constant electrode force. The system is capable of producing repeatable welds of consistent quality, with wide variations in weld parameters. This is the first time feedback control has been successfully applied to pinch welding. The second example presented in this paper was developed for penetration control of the gas-tungsten-arc welding process. The feedback signal is obtained by measuring the amount of light emitted from the back side of the weld. Welds of constant penetration have been demonstrated in tests with travel speeds varying from 1.5 to 6 inches per minute and with 200 per cent changes in part thickness.     

WDM传输系统中泵浦配置对光纤拉曼放大器增益特性的影响

通过理论分析和模拟运算,研究了光纤拉曼放大器泵浦优化的一般规律。     

Exoatmospheric interception problem solved using output feedback law

Interception problems are often dealt with by separating guidance and autopilot design. Guidance law can be obtained using optimal control theory and autopilot design is performed on a linearized system. In this paper, we introduce a new approach that determines a global guidance and autopilot law, based on direct output feedback design. Application of this method to exoatmospheric interception problem results in good performances. Extension to endoatmospheric case is under investigation.     

离散事件系统状态反馈控制的几何理论的进一步拓广

本文研究了定义在状态-事件序列上的谓词的离散事件系统的状态反馈控制问题。离散事件系统的数学模型是自动机。状态反馈与闭环过程的关系及许多基本的几何性质得到了详细的阐明;在这些几何背景下,解决了离散事件系统状态反馈控制的拓广问题,包括关于简单谓词与一般谓词的问题。     

基于OTRA的通用双二阶滤波器设计

提出了把通用双二阶滤波器视为负反馈放大器的观点,根据反馈电路的基本方程,利用3个MOS电阻、2个电容、2个运算跨阻放大器(OTRA)构成了通用双二阶滤波器,该滤波器不仅可从同一端口输出信号,从不同端口输入信号,而且可获得低通、高通、带通、带阻和全通输出.该电路结构简单,便于电控调谐.     

欠驱动系统Pendubot的模糊控制策略

本文针对欠驱动Pendubot机器人系统，提出一种简单可靠的摇起及平衡控制策略。通过利用模糊控制及全状态反馈控制技术来分别设计摇起控制器及平衡控制器，其中模糊摇起控制器的设计使得系统的摇起可靠性得到大大的加强，并缩短了响应时间，两个控制器的转换通过转换装置实现。最后的仿真结果验证了算法的有效性。