半轴套管多工位挤压自动化生产线中冲连皮缺陷产生机理及参数优化

针对半轴套管多工位热挤压自动化生产线工艺调试过程中,正挤压工序冲连皮时,管端易出现连皮粘连缺陷的问题,探讨了有可能造成连皮粘连的原因。通过对工艺流程和现场情况进行综合分析,提出了圆柱形坯料周向温度加热不均是关键的影响因素。采用Deform有限元分析软件,模拟了不同加热温差条件下,反挤压和冲连皮时材料变形及材料剪断过程。通过对模拟结果的分析,揭示了连皮粘连机理,并可知,当坯料周向加热温差小于30℃时,连皮可顺利冲下。根据模拟得出的合理温差,进行现场试验,实际情况与模拟结果具有较高的一致性,生产出的产品锻件切口平齐、连皮撕裂带分布均匀,有效地解决了连皮粘连的问题。     

一种电子元器件银浆用玻璃粉的研制

不同基体的银浆需要采用不同成分的玻璃粉才能达到合适的性能。采用Bi2O3-SiO2-B2O3体系，研究了Ag2O对Zn2SiO4介质陶瓷附着力的影响。当Bi2O3含量(质量分数)为65%，SiO2含量为15%，B2O3含量为10%，Ag2O含量为5%，Al2O3含量为5%时，制备的银浆附着力≥20N；所得银浆料的印刷性能、方阻、附着力、与焊料的润湿性及耐焊性等各项指标符合要求。     

Effect of cavosurface angle beveling on the exposure angle of enamel prisms in different cavity sizes

The quality of the micromechanical retention between the enamel prisms exposed through acid etching and adhesive system can be influenced by the relationship between the angle of the exposed enamel prisms and the external surface/restorative material. Therefore, the aim of the present study was to determine the influence of the enamel cavosurface beveling in different cavity sizes on the angle relation between enamel prisms and the restorative material. For this research, 30 human permanent molars were used and divided into three groups according the isthmus aperture of class I cavities (1/4, 1/3, and 1/2 of the intercuspal distance). Cavosurface angle beveling was performed in each tooth buccal or palatal/lingual side, and a resin composite restoration was placed. Each restored tooth was sectioned in buccal/palatal direction followed by analysis in scanning electron microscope. Means of the angles observed between enamel prisms and the restorative material were registered and statistically analyzed by Kruskal‐Wallis test. Results showed higher mean angle values for beveled groups when comparing with the values observed in the unbeveled margins (p < .05) regardless of the isthmus aperture, being 1/4 (beveled = 48.36°; unbeveled = 20.71°), 1/3 (beveled = 39.75°; unbeveled = 29.15°), and 1/2 (beveled = 37.02°; unbeveled = 26.34°). It was also observed that in some unbeveled cavities, there were the presence of laterally exposed enamel prisms (0°), mainly in more conservative cavities. It was concluded that the presence of higher angles values occurred in the samples with beveled margins, without presence of laterally exposed enamel prisms.     

The effects of thermoresponsive microgel density on cell adhesion,proliferation, and detachment

In recent years, poly(N-isopropylacrylamide)-based microgels have been emerged as a new thermoresponsive coating for cell/cell sheet harvesting, yet few work reports their effect on cell attachment, morphology, activity, and proliferation in details. In this work, poly(N-isopropylacrylamide-co-styrene) (pNIPAAmSt) microgel was selected as the model to study its density on NIH3T3 cell adhesion, morphology, activity, and detachment. Results showed that 0.5 wt % pNIPAAmSt microgel density leads to more cells adhesion, higher cell activity yet lower cell proliferation. Moreover, cell adhesion location can be well controlled either by manipulating the sub-cellular scale distances between microgels or by fabricating large scale surface patterns of the microgels on higher microgel density. By temperature stimuli, similar ratio cells detached from the microgel density surface from 0.5 to 1.5 wt %. The results in this article are worthy for the application of thermoresponsive microgels in cell regulation. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48773.     

环氧树脂涂层表面亲水性对微藻黏附性能的影响

在固体材料表面黏附成膜是微藻细胞的一种生理特性。近些年基于微藻生物膜的生物过程，如生物膜贴壁培养和防附着技术受到了很多关注。微藻在固体材料表面的黏附受藻细胞与材料表面之间的相互作用的影响，建立黏附强度与材料表面性质参数间的关系对于通过材料选择来强化或控制微藻生物膜具有非常重要的意义。本工作的目的是揭示和明确材料亲疏水性对微藻黏附的影响，提出了一种双酚A环氧(EP)树脂表面亲疏水改性的方法。通过将亲水性的二乙醇胺(DEA)或疏水性的聚甲基聚硅氧烷(PMHS)加入到EP树脂中反应，EP树脂表面水接触角在36.80?~98.34?范围内可通过加入不同量的DEA或PMHS实现任意可调，材料的表面水接触角与DEA或PMHS加入量之间有线性关系。重要的是这种改性方法获得的材料，其形貌、结构、表面粗糙度等表面性质几乎没有变化，从而在研究和关联微藻黏附量与材料表面亲疏水性(表面水接触角)之间的关系时可以排除亲疏水性之外的其他表面性质的影响；其次，考察了小球藻和栅藻在不同亲疏水性材料表面的黏附行为，结果表明小球藻和栅藻在亲水性和疏水性材料表面均能黏附成膜，但在亲水性材料表面黏附更多更快；建立了微藻最大黏附容量与材料表面接触角之间关联关系，表明微藻最大黏附容量随材料表面水接触角的增大而线性降低，栅藻的表面黏附容量比小球藻大。     

Babesia Bovis Ligand-Receptor Interaction: AMA-1 Contains Small Regions Governing Bovine Erythrocyte Binding

Apical membrane antigen 1 is a microneme protein which plays an indispensable role during Apicomplexa parasite invasion. The detailed mechanism of AMA-1 molecular interaction with its receptor on bovine erythrocytes has not been completely defined in Babesia bovis. This study was focused on identifying the minimum B. bovis AMA-1-derived regions governing specific and high-affinity binding to its target cells. Different approaches were used for detecting ama-1 locus genetic variability and natural selection signatures. The binding properties of twelve highly conserved 20-residue-long peptides were evaluated using a sensitive and specific binding assay based on radio-iodination. B. bovis AMA-1 ectodomain structure was modelled and refined using molecular modelling software. NetMHCIIpan software was used for calculating B- and T-cell epitopes. The B. bovis ama-1 gene had regions under functional constraint, having the highest negative selective pressure intensity in the Domain I encoding region. Interestingly, B. bovis AMA-1-DI (¹⁰⁰YMQKFDIPRNHGSGIYVDLG¹¹⁹ and ¹²⁰GYESVGSKSYRMPVGKCPVV¹³⁹) and DII (³⁰²CPMHPVRDAIFGKWSGGSCV³²¹)-derived peptides had high specificity interaction with erythrocytes and bound to a chymotrypsin and neuraminidase-treatment sensitive receptor. DI-derived peptides appear to be exposed on the protein’s surface and contain predicted B- and T-cell epitopes. These findings provide data (for the first-time) concerning B. bovis AMA-1 functional subunits which are important for establishing receptor-ligand interactions which could be used in synthetic vaccine development.     

晶片表面几何特性对键合的影响

由最小能量原理导出的键合条件出发,利用线性薄板理论,在同一理论模型框架下,通过量度键合过程能否进行的弹性应变能累积率,分析了晶片表面的宏观尺度的弯曲和微观尺度的起伏对晶片键合的影响,并对所得结果进行了详细讨论．