Effect of cavosurface angle beveling on the exposure angle of enamel prisms in different cavity sizes

The quality of the micromechanical retention between the enamel prisms exposed through acid etching and adhesive system can be influenced by the relationship between the angle of the exposed enamel prisms and the external surface/restorative material. Therefore, the aim of the present study was to determine the influence of the enamel cavosurface beveling in different cavity sizes on the angle relation between enamel prisms and the restorative material. For this research, 30 human permanent molars were used and divided into three groups according the isthmus aperture of class I cavities (1/4, 1/3, and 1/2 of the intercuspal distance). Cavosurface angle beveling was performed in each tooth buccal or palatal/lingual side, and a resin composite restoration was placed. Each restored tooth was sectioned in buccal/palatal direction followed by analysis in scanning electron microscope. Means of the angles observed between enamel prisms and the restorative material were registered and statistically analyzed by Kruskal‐Wallis test. Results showed higher mean angle values for beveled groups when comparing with the values observed in the unbeveled margins (p < .05) regardless of the isthmus aperture, being 1/4 (beveled = 48.36°; unbeveled = 20.71°), 1/3 (beveled = 39.75°; unbeveled = 29.15°), and 1/2 (beveled = 37.02°; unbeveled = 26.34°). It was also observed that in some unbeveled cavities, there were the presence of laterally exposed enamel prisms (0°), mainly in more conservative cavities. It was concluded that the presence of higher angles values occurred in the samples with beveled margins, without presence of laterally exposed enamel prisms.     

Understanding stickiness in sugar-rich food systems: A review of mechanisms,analyses, and solutions of adhesion

Stickinessis an inherent textural property in many sugar-rich foods, which can be problematic to the processing of confectionery products. The adhesion between foods and contact surfaces during processing and consumption has not been well understood in academia or industry. The theories of adhesion were discovered by scientists in the adhesive field of study, some of which can explain the stickiness phenomenon of confections. This work reviewed these theories in the context of sugar-rich foods, followed by a survey on the sensory and instrumental analyses of stickiness. Furthermore, the contributions of ingredients, temperature, compression, and contact surfaces to sugar-rich food adhesion are highlighted.     

Exceptional improvement in the wear resistance of biomedical β-type titanium alloy with the use of a biocompatible multilayer Si/DLC nanocomposite coating

A silicon/diamond-like carbon (Si/DLC) multilayer nanocomposite coating (MNC) was applied to the Ti–29Nb–13Ta?4.6Zr (TNTZ) alloy to improve its wear resistance and durability. The Si/DLC MNC on the TNTZ alloy demonstrated an extremely low wear rate of 6.2 × 10^?10 mm³N^?1mm^?1. Moreover, the wear track depth after one million wear cycles was found to be only 220 nm, while the thickness of the entire coating was 370 nm. Furthermore, cell culture tests demonstrated that the Si/DLC MNC samples exhibited better biocompatibility than the TNTZ alloy samples. A quantitative comparison of the cell adhesion behavior of the TNTZ and Si/DLC MNC samples indicated that 60% of the surface of the Si/DLC MNC sample was covered with cells, which was approximately twice the surface of the TNTZ alloy sample covered with cells. In addition, no dead cells were observed on the Si/DLC MNC samples, indicating that the Si/DLC MNC samples exhibited no toxic effects against the MC3T3 cells. These results indicate that the Si/DLC MNC enhances the wear resistance of the TNTZ alloy and improves its biofunctionality, thus making it a potential candidate for use in long-term implant applications.     

三聚硫氰酸单钠盐的制备及应用研究进展

三聚硫氰酸单钠盐是一种新型的多官能团化精细化学品。介绍了三聚硫氰酸单钠盐的制备方法,以及其在橡胶硫化、橡胶与金属的硫化粘合等领域的应用研究进展。     

Effects of system dynamics and applied force on adhesion measurement in colloidal probe technique

Dynamic pull-in/pull-off forces were quantitatively measured using an AFM colloidal probe technique. Two spherical colloids made of silicon dioxide (SiO₂) and gold (Au) that were attached to an AFM cantilever were approached to and retracted from a silicon wafer specimen, where the speed of tip approaching/retracting (i.e., vertical dynamics) and specimen sliding (i.e., horizontal dynamics) was controlled. First, when the vertical dynamics of colloidal tip was applied on the stationary silicon wafer specimen, it was observed that the slower tip approaching showed higher pull-in force, while the pull-off force was dependent on both the applied force and the retracting speed. For the two colloidal tips, it was found that the higher applied force and the faster tip retraction led to the higher pull-off force. Next, under the constant speed of tip approach and retraction, horizontal dynamics was applied to the silicon wafer specimen. It was observed that the horizontal motion of the specimen made the pull-off force lower, which could be attributed to the breakage of adhesive asperity junctions at the interface. The pull-off force was further decreased at faster horizontal motion of the specimen due to the longer sliding distance. Therefore, from the systematic experiments of dynamic adhesion measurement, it could be known that if a micro/nano-system is under dynamic surface interaction, its adhesive force cannot be fully described by a conventional quasi-static adhesion model but it should include the effects of applied system dynamics in both normal and tangential directions.     

Dry forming of aluminum alloys – Wear mechanisms and influencing factors

Tribological contacts in sheet metal forming are accompanied by several wear phenomena. One of which is the transfer of material from the softer sheet material to the harder tool surface, namely adhesive wear. Forming of aluminum alloys makes high demands on forming processes. Aluminum alloys show a strong tendency of adhesion on common tool materials. Adhesions on tools reduce the surface quality, the dimensional accuracy of the parts and the process stability. In order to avoid adhesive wear during forming, nowadays a high amount of lubricant is applied to the aluminum sheets. Though economically and ecologically attractive, dry forming processes with aluminum sheets seem not to be possible. In order to develop advantageous tribological systems a comprehensive understanding of the acting mechanisms is necessary. This paper discusses the influence of the alloy composition and the influence of oxide layers on the adhesive wear in aluminum forming.     

有机硅压敏胶的性能及影响因素

对有机硅压敏胶的几个影响因素进行了考察,在此基础上研制出一种有机硅压敏胶。乙烯基含量为0.3%的MQ硅树脂和相对分子质量为4.0×105的硅橡胶等比例配合,经1.0%的二丁基二月桂酸锡催化缩合,再以1.5%的BPO交联剂200℃下交联10min制得的有机硅压敏胶性能优异,初黏力25#,室温持黏力960min,剥离强度13.45N/25mm。     

电子行业用聚酯热熔胶的制备及其性能研究

以玻璃化转变温度较低的共聚酯制备了聚酯热熔胶。研究结果表明:聚酯热熔胶对丙烯腈-丁二烯-苯乙烯共聚物(ABS)、聚碳酸酯(PC)等极性塑料与金属材料具有良好的粘接性能,稳定后的剥离强度大于100N/25mm;同时,具有良好的耐老化性能及粘接持久性。聚酯热熔胶可取代国外产品用于电子行业用极性聚合物与金属材料粘接。     

Characterization of the surface energies of functionalized multi-walled carbon nanotubes and their interfacial adhesion energies with various polymers

The surface energies of pristine multi-walled carbon nanotubes (MWCNTs) and MWCNTs functionalized with carboxylic acid (MWCNT-COOH), acyl chloride and ethyl amine were characterized, and the effects of the changes in MWCNT surface energies on the interfacial adhesion and reinforcement of the composites were explored. When the surface energy of pristine MWCNTs was compared to that of functionalized MWCNTs, a decrease in the dispersive surface energy and an increase in the polar surface energy were observed. Interfacial adhesion energies between MWCNTs and various polymers were estimated from surface energy values of MWCNTs and various polymers. Among the MWCNTs, polyethylene, polystyrene and bisphenol-A polycarbonate (PC) had the highest interfacial energy with pristine MWCNTs, while nylon 6,6 and polyacrylamine exhibited the highest interfacial energy with MWCNT-COOH. When tensile properties and adhesion at the interface of PC and nylon 6,6 composites containing MWCNTs were examined, composites having high interfacial adhesion energy exhibited greater adhesion at the interface and reinforcement.