110 m3氯乙烯聚合釜运行总结

介绍了在207t／a PVC生产装置中采用国内先进的110 m3聚合釜的工艺特点、设备配置、安全和环保措施及运行情况。     

基于ARM-μCLinux的GPRS远程监控系统设计

介绍一种基于ARM-μClinux平台及GPRS技术的嵌入式监控系统。系统采用了ARMS3C44B0X芯片为核心设计监控终端硬件电路,在μClinux操作系统下进行了监控应用程序的开发,通过SIM300模块实现了监控终端与远程服务器的数据通信。该系统可以较好满足远程监控系统对数据传输可靠性和实时性的要求。     

Cognitive amplify‐and‐forward relay networks with beamforming under primary user power constraint over Nakagami‐m fading channels

In this paper, we analyze the performance of cognitive amplify‐and‐forward (AF) relay networks with beamforming under the peak interference power constraint of the primary user (PU). We focus on the scenario that beamforming is applied at the multi‐antenna secondary transmitter and receiver. Also, the secondary relay network operates in channel state information‐assisted AF mode, and the signals undergo independent Nakagami‐m fading. In particular, closed‐form expressions for the outage probability and symbol error rate (SER) of the considered network over Nakagami‐m fading are presented. More importantly, asymptotic closed‐form expressions for the outage probability and SER are derived. These tractable closed‐form expressions for the network performance readily enable us to evaluate and examine the impact of network parameters on the system performance. Specifically, the impact of the number of antennas, the fading severity parameters, the channel mean powers, and the peak interference power is addressed. The asymptotic analysis manifests that the peak interference power constraint imposed on the secondary relay network has no effect on the diversity gain. However, the coding gain is affected by the fading parameters of the links from the primary receiver to the secondary relay network. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance analysis of two‐hop decode‐amplify‐forward relayed system in different fading conditions

Recent advances in the field of wireless communication have proven the importance of diversity in combating channel fading and improving the bit error rates (BERs). In this report, a dual‐hop decode‐amplify‐forward (DAF) transmission system over Nakagami‐m fading channel is studied. The DAF relay system is a hybrid of decode‐and‐forward and amplify‐and‐forward relay systems that shows the benefits of both decode‐and‐forward and amplify‐and‐forward relay systems and is also called hybrid relay system or hybrid DAF relay system. Signal‐to‐noise ratios and BERs for various system models with varying number of transmit and receive antennas have been discussed. The diversity is achieved in two ways: firstly, by the use of relay and secondly, by the use of multiple antennas at both the transmitter and the receiver. Dual‐hop relaying gives better trunking efficiency and with single antenna at the relay site acquisition and antenna structures are much less expensive. The variations in the performance levels when the relay is moved to different locations within the line of sight of the transmitter and the receiver have also been analyzed. BERs with respect to variations in the fading parameter ‘m’ have also been presented and discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

部分分散控制及其在单元机组协调控制中的应用

针对强耦合多变量对象控制系统设计中分散控制不能满足高性能要求,而多变量先进控制算法结构复杂、较难推广的现象,研究基于扩展对象的部分分散控制器设计。设计过程首先通过结构分析法得出部分分散控制器结构,再对其对象进行非方扩展,利用非方内模法设计相应非方分散控制器并转化为部分分散控制器,最后应用扩展μ交互法进行稳定性分析。将该方法应用于一500 MW单元机组协调控制系统的仿真研究,结果表明:部分分散控制系统能达到与多变量协调控制系统相近的性能,并且部分分散控制结构更加简单、设计及调试方法更加容易。     

金属过氧化氢电池的发展及现状

对金属过氧化氢电池的发展历程及应用现状进行了综述,简述了国外工程化研究和国内的基础研究情况,针对国内外研制规模存在的差距,对电池结构设计和成组技术进行了简要介绍.     

微秒脉冲电场对宫颈癌细胞粘附、侵袭和迁移能力的影响

摘要：对于不可逆电穿孔（irreversible electroporation,IRE）技术等治疗肿瘤的物理疗法而言,术后残存肿瘤细胞的粘附、侵袭和迁移能力能否被抑制,是关系到能否降低肿瘤复发和转移风险、巩固和保证治疗效果的重要问题。为探讨采用不可逆电穿孔治疗肿瘤时,所施加的μs脉冲电场对残存肿瘤细胞粘附、侵袭和迁移...     

首台国产化10m~3原级球罐制造技术

在严格执行国家标准及行业标准规定下,大连金鼎石化公司成功地制造了10m3国内体积最小的高强钢原级球罐,实现了国产化,填补了国内空白。本文主要从弹塑性变形和球罐组焊两大方向阐释了球罐制造技术要点及成型控制措施。对今后标准计量型球罐研究工作及提高制造技术水平都有一定的指导作用。     

基于STM32的μC/OS_II与μC/GUI整合移植与显示优化

为了创建一个高效、直观、支持多任务的嵌入式图像开发平台,建立了基于μC/OS_II、μC/GUI、STM32、ILI9320液晶屏的嵌入式实验环境,对μC/OS_II和μC/GUI的整合移植方法进行研究,并针对μC/GUI的中文支持欠缺和屏幕刷新率低等不足进行优化。研究了μC/OS_II、μC/GUI的组织架构,针对μC/OS_II与CPU任务切换密切相关的文件进行改写,同时在μC/OS_II成功移植的基础上对μC/GUI进行进一步的移植操作,包括修改与μC/OS_II相关的文件,改写μC/GUI底层与LCD驱动密切联系的函数。在μC/GUI成功移植的基础上对其字库文件进行改写,加入中文字库;对μC/GUI的画点、画线、矩形填充函数进行修改,提高液晶屏的屏幕刷新效率。实验结果表明,所创建的4个任务切换正常,中文正常显示,同时像素填充率由之前的996 080/s上升到优化后的1 629 060/s。μC/OS_II与μC/GUI能正常地协同工作,优化带来了μC/GUI性能的提升。     

HDI板高厚径比微盲孔跨层微导通孔技术开发

高厚径比微盲孔的HDI板制作通常需要很好的孔金属化能力保障其导通可靠性,但所需生产设备及其配套成本让不少厂商望而却步。本文所述高厚径比微盲孔跨层微导通孔（skip-μvia）技术,通过定位精度控制、激光钻孔参数调整以及制板流程优化等工艺的开发,能以更低的成本、更高的品质、更短的加工流程以及常规孔金属化设备实现高厚径比的微盲孔制造,从而降低了高厚径比微盲孔HDI板制造的难度。