γ射线和电子束辐照对风味豆干杀菌效果及品质的影响

为探究γ射线和电子束辐照对风味豆干微生物和理化指标影响的差异性，分别采用不同剂量的γ射线（0、3.1、5.9、8.6、11.4 kGy）和电子束（0、2.7、5.5、8.2、10.8 kGy）辐照风味豆干，研究其对风味豆干中微生物存活数、营养成分、理化指标及质构特性的影响。结果表明，γ射线和电子束辐照均能有效控制风味豆干菌落总数、霉菌及大肠菌群数，γ射线辐照杂菌和霉菌的D₁₀值分别为1.82 kGy和1.72 kGy，电子束辐照的D₁₀值分别为2.44 kGy和1.79 kGy，γ射线对风味豆干的杀菌效果强于电子束。两种辐照方式对风味豆干水分、蛋白和灰分的含量没有明显影响，但辐照后脂肪含量均显著降低。γ射线辐照后风味豆干氨基酸的含量无明显变化，但5.5 kGy剂量条件下，电子束辐照会对缬氨酸、苯丙氨酸、脯氨酸、甘氨酸、丙氨酸、酪氨酸等6种氨基酸的含量产生显著影响。γ射线辐照对风味豆干过氧化值有显著的影响，与酸价无明显的相关性；而电子束辐照与风味豆干过氧化值没有明显的相关性，但会引起其酸价显著上升。γ射线辐照不会对风味豆干硬度、内聚性、胶着性、咀嚼性和弹性产生显著影响，电子束辐照对其硬度、内聚性和胶着性的影响不显著，但5.5 kGy以上剂量辐照会对其咀嚼性和弹性产生显著的影响。综上所述，γ射线和电子束对风味豆干的辐照效应在某些方面存在一定的差异性，但均具有在豆干加工中应用的潜力，研究结果可为γ射线和电子束辐照技术在豆干加工中的应用提供理论依据。     

中国钢铁行业重点工序烟气超低排放技术进展

 钢铁行业已成为中国大气污染防治重点行业，目前中国已提出钢铁行业烧结、球团等工序超低排放限值。总结了烧结(球团)、焦炉、高炉、转炉等多个工序高效净化技术路线，集成了源头减排、过程控制和末端治理的多污染物超低排放技术体系，包括“烟气循环技术”、“半干法脱硫耦合中低温SCR脱硝技术”、“活性炭法一体化技术”、“臭氧氧化硫硝协同吸收技术”、“高炉炉料结构优化的硫硝源头减排技术”、“转炉二次烟气预荷电袋滤器除尘技术”等关键技术，上述技术在中国部分钢铁企业均有应用实践。最后提出了生产技术绿色化、污染计量合理化、加强非常规污染物管控、重视钢铁行业碳排放的发展建议。     

一种提高油样中低含量石油磺酸盐分析效率的方法

为了准确分析油田化学驱采出液油样中石油磺酸盐的含量,介绍了一种在油样中加入不同极性溶剂组成的萃取体系的预处理技术,将石油磺酸盐萃取到水相,利用液相色谱仪对其进行检测的方法。取适量油样,依次加入正己烷、二氯甲烷、无水乙醇和蒸馏水,振荡均匀后静置分层,取下层水相溶液进行色谱分析。色谱柱为阴离子交换柱,流动相为甲醇/水和甲醇/盐水(含0.2 mol/L乙酸和0.2 mol/L乙酸铵),梯度洗脱。实验结果表明,该预处理技术联合液相色谱法检测技术分析效率较高,加标回收率高于90%,液相色谱最小定量限10 mg/L,线性范围10～2000 mg/L。该方法可对油样中低含量的石油磺酸盐进行快速定量分析。     

Drilling machinability of engineering ceramics under low-frequency axial vibration processing by sintering/brazing composite diamond trepanning bit

Thin-wall diamond trepanning bits are extensively used for processing hard and brittle materials such as engineering ceramics. However, it is difficult to achieve high-efficiency processing of engineering ceramics at a constant feed speed, because of high dynamic compressive strength, high hardness, and low density of engineering ceramics. In this study, a novel composite diamond bit combining sintering and brazing has been designed, along with the low-frequency axial vibration technology, to realize the continuous hole processing of engineering ceramics. Drilling experiments have been conducted on Al₂O₃ and SiC engineering ceramics with a constant feed speed. The variation of axial force, micromorphology of hole wall surface drilled, as well as the method of removing nesting during the drilling process were analyzed. According to the results, the novel composite diamond bit fabricated by combining sintering and brazing, can achieve the continuous hole processing of engineering ceramics at a constant feed speed, including Al₂O₃ and SiC. Compared to the conventional drilling (CD), the low-frequency axial vibration drilling (LFVD) can significantly reduce the axial force, and produce fewer plastic scratches on the hole wall surface drilled. In particular, the automatic blanking ratio approaches to 100% by LFVD, and only about 73.58% by CD. It can be concluded that LFVD technology can be used to realize continuous hole processing of engineering ceramics. The research results achieved in this study show that the drilling machinability of engineering ceramics by LFVD and novel composite diamond bit is good. Accordingly, this study provides a useful reference for continuous processing or batch production of engineering ceramics at a constant feed speed.     

Wear mechanism of a novel AlSiMgAl2O4Al2O3 composite used in the low vessel of an RH secondary refining furnace

A novel AlSiMgAl₂O₄Al₂O₃ composite brick was prepared and evaluated in the low vessel of an RH (the initials of Ruhrstahl and Hereaeus) secondary refining furnace; it was characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy. The results show that after use, the AlSiMgAl₂O₄Al₂O₃ composite has a functional gradient with an erosion zone–reinforced zone–original zone phase distribution, in which the phases in the erosion zone (0–1.8?cm) are a Mg-hercynite spinel solid solution, α-Al₂O₃, and minor amount of Al₃Fe₅O₁₂. Furthermore, the phases in the reinforced zone (1.8–5.0?cm) are γ-AlON, 21RSiAlON, SiC, Mg_0.388Al_2.408O₄, and α-Al₂O₃; i.e., the Al and Si in the composite are completely converted into non-oxide reinforced phases. Finally, the phases in the original zone (>5.0?cm) show no change. The reaction mechanism is as follows. During operation, a Mg-hercynite spinel solid solution is formed in the erosion zone due to a reaction between MgAl₂O₄ and FeO from a refinery operation. Therefore, the slag erosion of the material is improved. The Al and Si metals undergo active oxidation, and 21RSiAlON flakes are subsequently formed from the products of the metastable Al₂O(g), SiO(g), and N₂(g) in the ambient. The γ-AlON is formed by a carbothermal reduction nitridation of the α-Al₂O₃ and residual active carbon from the resin binder. The 21RSiAlON and γ-AlON reinforce the composite brick and improve its high temperature performance accordingly. Its service life is 110% that of the magnesia-chrome bricks used in the same period. The reaction model was also established.     

不同硫组分在菱锌矿表面吸附的计算研究

采用量子化学计算的第一性原理模拟了不同硫组分在菱锌矿(001)解离面上的吸附,研究了硫组分在菱锌矿表面的吸附机理。吸附能计算结果显示:相比HS-,S2-在菱锌矿(001)解离面的吸附更加稳定,吸附能的绝对值更大,同时发现硫组分主要吸附在Zn位上;吸附前后的态密度对比分析表明,硫组分在菱锌矿表面的吸附形成了新的Zn—S化学键;布居分析发现:硫组分吸附在菱锌矿表面新形成Zn—S键的过程中,Zn、S之间发生了明显的电荷转移。研究结果阐释了菱锌矿的硫化机理,为菱锌矿硫化浮选研究提供了理论依据。     

医院级CT辐射剂量及诊断剂量水平研究

探讨医院级各部位CT扫描辐射剂量及成人CT检查诊断剂量水平。采集2018年2月—2019年1月本院在GE Light Speed 16 CT设备上进行诊断性CT检查的全部成年人共15 440例的CT检查数据,按照检查部位进行分类,统计各部位的容积剂量指数(CTDI_vol)、剂量长度乘积(DLP)。使用SPSS 19统计软件分析CTDI_vol、DLP的四分位数并计算有效剂量(ED)。结果表明,各部位CTDI_vol的诊断剂量参考水平(DRL)值为:颅脑87.75 mGy、肺部8.09 mGy、上下腹15.82 mGy、上下腹盆腔15.79 mGy;各部位DLP的诊断剂量参考水平(DRL)值为:颅脑1 053.03 mGy·cm、肺部245.19 mGy·cm、上下腹269.96 mGy·cm、上下腹盆腔835.20 mGy·cm。研究中发现肺部CTDI_vol、DLP的DRL值(分别为8.09 mGy、245.19 mGy·cm)低于我国其他地区和其他国家的DRL值;60岁以下患者肺部CT检查CTDI_vol、DLP的DRL值低于8.09 mGy、245.19 mGy·cm,60岁以上患者肺部CT检查CTDI_vol、DLP的DRL值高于8.09 mGy、245.19 mGy·cm。通过研究可以确定医院级各部位CT检查辐射剂量及成人CT检查诊断剂量水平,能为优化CT检查扫描技术和监测辐射剂量提供基础。