Effects of non-thermal plasma treating wheat kernel on the physicochemical properties of wheat flour and the quality of fresh wet noodles

The effects of non-thermal plasma (NTP) on the physicochemical properties of wheat flour and the quality of fresh wet noodles ( FWN) were investigated. The results showed that NTP effectively decreased the total plate count (TPC), yeast and mould count (YMC) and Bacillus spp. in wheat flour. Wet gluten contents and the stability time reached the maximum when treated for 20 s. The viscosity of starch increased significantly after treatment due to the increased of damaged starch. The contents of secondary structure were altered to some extent, which was because that the ordered network structure of gluten protein broken. Furthermore, compared with the control, texture properties of FWN were enhanced significantly at 20 s, and the darkening rate of FWN was greatly inhibited due to the low polyphenol oxidase (PPO) activity. Consequently, the most suitable treatment was 500 W for 20 s, providing a basis for the application of NTP in flour products.     

生活用纸湿强剂PAE残留的风险评估

介绍了生活用纸中湿强剂聚酰胺环氧氯丙烷树脂（PAE）的残留状况及对人类健康的风险隐患；结合欧盟法规规定和风险评估模型，计算了生活用纸中残留PAE经皮肤摄入的风险指数，并进行了PAE残留风险评估。结果表明，PAE中的有机氯代物在纸巾纸等生活用纸中残留的概率较大，长期接触这些有害物质将对使用者的身体健康产生潜在的风险隐患。     

糙米干法和湿法微粉碎对面团及面包品质的影响

将糙米分别进行干法和湿法微粉碎,与谷朊粉以4:1比例混合,制备糙米面团和面包,研究干法和湿法微粉碎对糙米面团和面包品质的影响。结果表明,经干法和湿法微粉碎后糙米粉颗粒细度显著降低,湿法粉碎糙米粉破损淀粉含量较少。干法粉碎糙米粉面团结构致密,弹性和黏性升高,糙米面包比容降低,硬度和耐咀性增强,弹性降低。随着粉碎时间的延长,湿法粉碎糙米粉-谷朊粉面团的黏性和弹性先升高后降低,面团网络结构更加紧密,其面包的比容与黏性和弹性变化规律一致,面包耐咀性和硬度增加,弹性降低。干法粉碎15 min(微粉A),湿法粉碎40 min(微粉X)时,糙米面包的比容最大,硬度和弹性适中,面包的品质较好。     

混炼方式对螺旋纳米碳纤维增强天然橡胶复合材料力学性能的影响

采用干法和湿法两种混炼工艺制备了螺旋纳米碳纤维(HCNFs)/炭黑(CB)/天然橡胶(NR)复合材料,通过扫描电镜、拉伸试验机和应变扫描仪分别对所制备复合材料的界面形貌、力学性能和Payne效应进行了测试分析,考察了混炼方式对复合材料宏观力学性能及Payne效应的影响。结果表明,与纯CB填料相比,在干湿两种混炼方式下,添加适量的HCNFs(1～6份)能提高HCNFs/CB/NR复合材料的300%定伸应力、扯断伸长率、拉伸强度和硬度。与干法混炼相比,湿法混炼能明显增强HCNFs/CB/NR复合材料的Payne效应,并提升在HCNFs高添加量(2～6份)条件下的拉伸强度和扯断伸长率,这主要源于湿法混炼能够有效改善HCNFs在橡胶基质中的分散性。     

Catalytic oxidative desulfurization of gasoline using phosphotungstic acid supported on MWW zeolite

Catalysts for the desulfurization of gasoline samples were synthesized via the immobilization of well-dispersed phosphotungstic acid (HPW) on Mobil composition of matter-twenty-two (MWW) zeolite. Characterization results indicated that these catalysts possess a mesoporous structure with the retention of the Keggin structure of immobilized HPW. Relevant reaction parameters influencing sulfur removal were systematically investigated, including HPW loading, catalyst dosage, temperature, initial S-concentration, molar ratio of oxidant to sulfide (O/S), volume ratio of MeCN to model oil (Ext./oil), and sulfide species. The 40 wt-% HPW/MWW catalyst exhibited the highest catalytic activity with 99.6% dibenzothiophene sulfur removal from prepared samples. The 40 wt-% HPW/MWW catalyst was recycled four times and could be easily regenerated. Finally, as an exploratory study, straight-run-gasoline and fluid catalytic cracking gasoline were employed to accurately evaluate the desulfurization performance of 40 wt-% HPW/MWW. Our research provides new insights into the development and application of catalysts for desulfurization of gasoline.     

β-环糊精修饰Ni/SFCC强化C9石油树脂催化加氢性能

以废弃的流化催化裂化催化剂（简称SFCC）为载体、β-环糊精为金属络合剂、硝酸镍为镍源，采用湿法浸渍法制备β-环糊精修饰的Ni/SFCC催化剂（简称Ni/SFCC-CD催化剂），考察其对C9石油树脂的催化加氢性能。通过BET比表面积测试、H2程序升温还原、X射线光电子能谱等手段对催化剂的物相结构进行表征，研究β-环糊精的作用机理及其对催化剂加氢性能的影响。研究结果表明：在反应温度为260 ℃、反应压力为7 MPa、反应时间为2.0 h的最优条件下，采用Ni/SFCC-CD催化C9石油树脂加氢，可制得溴值为1.45 gBr/（100 g）、色号（加纳德）小于1的水白色氢化C9石油树脂，催化剂循环使用4次后仍保持良好活性；β-环糊精的作用机理是：β-环糊精与硝酸镍产生络合作用，抑制硝酸镍的分解、控制NiO的结晶过程和增强活性组分Ni与载体之间的相互作用力，从而提高了Ni/SFCC-CD的催化活性和稳定性。     

检测仪器及消解方式对罗布麻微量元素检测效果的影响

目的 探索罗布麻微量元素适宜的检测条件。方法 以新疆产罗布麻和白麻叶及其制品罗布麻茶为实验材料, 比较了电感耦合等离子体质谱法(inductively coupled plasma mass spectrometry, ICP-MS)和电感耦合等离子体原子发射光谱法(inductively coupled plasma atomic emission spectrometry, ICP-AES)2种仪器对其Li、B、Cr、Fe、Mn、Cu、Zn、Se和Sr 9种微量元素的检测效果, 同时对比了3种不同的湿法消解方式对检测结果的影响。结果 采用不同酸解液的3种湿法消解方法, 硝酸/过氧化氢消解液处理条件较温和, 元素损失量较少, 检测结果稍高于浓硝酸/高氯酸消解液处理的结果, 但所耗消解时间更长。对于易挥发元素Se, 选用酸性和氧化性较弱的硝酸/过氧化氢消解液更适宜。在本试验条件下, 罗布麻体内的Li和Cr 2种微量元素不宜采用ICP-AES仪器检测, 可选用ICP-MS, 而对于难电离元素Se则正好相反。结论 检测罗布麻微量元素含量时, 应根据待检测元素类型特征, 选择适宜的检测仪器。     

不同方法发酵的酸豆角品质对比分析

本文将研究不同方法发酵的酸豆角品质对比分析。选取质地嫩脆、条形均匀、无病虫害的新鲜豆角为泡制原料。采用自然干法发酵、自然湿法发酵与纯种湿法发酵的发酵方法制作酸豆角。检测发酵过程中，pH值、还原糖含量、总酸含量、总糖含量、亚硝酸盐含量以及氨基酸态氮含量，分析纯种湿法发酵与自然湿法发酵对酸豆角品质的影响。结果表明：纯种湿法发酵25 d后，其pH值和还原糖含量分别为3.92、0.03%，均高于自然湿法发酵；总酸、总糖、亚硝酸盐含量、氨基酸态氮含量分别为0.25%、0.04%、0.01 mg/kg和0.01%，均低于自然湿法发酵。另外，纯种湿法发酵酸豆角的甲氧基乙酸含量为0.37%，乙酸乙酯为0.51%，含水量为81.15%，感官评分为45.52，均高于自然干法发酵。纯种湿法发酵对酸豆角品质的效果最好，亚硝酸盐的含量在发酵后期显著降低，感官评分较高，对豆角工业化生产提供了较好的参考价值。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

湿法磷酸净化脱砷的研究现状

随着食品、医药及电子行业的不断发展，磷酸及磷酸盐的市场需求量不断增大，并且对磷酸的品质要求也越来越高，尤其是对湿法磷酸中砷杂质的要求，湿法磷酸中砷的含量将直接影响其在磷精细化工领域的应用，因此湿法磷酸中砷的高效、安全去除是亟待解决的一大难题。本文主要对湿法净化磷酸脱砷技术的研究情况进行综述，比较了几种湿法净化磷酸脱砷工艺的优缺点，介绍了较常见的化学沉淀法、结晶法，以及新兴的电沉积法、垂直区域熔融法和微反应器脱砷工艺的应用前景，并指出这些新兴的脱砷工艺将成为今后湿法磷酸的净化脱砷的发展方向，如能解决将这些脱砷工艺在实际中的问题，将会对磷酸工业的发展提供一个更有力的支持。