Preparation of P(St-NMA) microsphere inks and their application in photonic crystal patterns with brilliant structural colors

Patterned photonic crystals with structural colors on textile substrates have attracted a special attention due to the great advantages in application, which currently become a research hot-spot. This study utilized an ink-jet printing technology to prepare high-quality photonic crystal patterns with structural colors on polyester substrates. The self-assembly temperature of poly(styrene-N-methylol acrylamide) (P(St-NMA)) microspheres set to construct photonic crystals were deeply optimized. Moreover, the structural colors of prepared photonic crystal patterns were characterized and evaluated. When the mass fraction of P(St-NMA) microspheres was 1.0 wt.%, the pH value ranged from 5 to 7, and the surface tension was in the range of 63.79 to 71.20 mN/m, inks could present the best print performance. At 60 °C, prepared P(St-NMA) microsphere inks were good for printing to obtain patterned photonic crystals with regular arrangement and beautiful structural colors. Specifically, photonic crystals with different colors could be constructed by regulating the diameter of microspheres in inks, and prepared structural colors exhibited distinct iridescent phenomenon. The present results could provide a theoretical basis for the industrial realization of patterned photonic crystals by ink-jet printing technology.     

废旧毛涤黏混纺面料脱色预处理工艺研究

以废旧毛涤黏混纺面料为研究对象,首先对面料进行清洁与消毒,然后对其组分进行定性、定量分析,最后通过单因素法优化,得出最佳的溶胀工艺为:m_(废旧面料)∶m_(DMSO)=1∶10,溶胀时间40 min,溶胀温度90℃。在该工艺下对织物进行溶胀处理,得到织物的质量损失率为3.06%,K/S值为16.906。     

Lipase‐catalyzed synthesis of aliphatic poly(β‐thioether ester) with various methylene group contents: thermal properties,crystallization and degradation

A series of novel aliphatic poly(β‐thioether ester)s with various methylene group contents were prepared by direct lipase‐catalyzed polycondensation of the monomer with an acid‐labile β‐thiopropionate group. The polycondensation reaction using immobilized lipase B from Candida antarctica was carried out in diphenyl ether at 90 °C. Poly(β‐thioether ester)s with high molecular weights of 20 500–57 000 Da and narrow polydispersities in the range 1.40–1.48 were obtained. Thermogravimetric analysis, differential scanning calorimetry and wide‐angle X‐ray diffraction were used to investigate the thermal properties and crystal structures of these polyesters. All the poly(β‐thioether ester)s were semicrystalline polymers and thermally stable up to at least 200 °C. In vitro degradation studies showed that they can rapidly degrade under acidic conditions by the hydrolysis of the β‐thiopropionate groups, suggesting their potential as acid‐degradable polymeric materials. © 2019 Society of Chemical Industry     

生物基异己糖醇聚酯的制备及其构效关系研究进展

异己糖醇是一类碳水化合物衍生二元醇,具有高刚性、手性、亲水性和低毒等特性,在制备新型生物基、生物可降解高分子材料方面具有广阔的发展前景。围绕近年来研究较为充分的全脂肪型及半芳香型异己糖醇基均聚酯与共聚酯,综述了其合成、热学性能、力学性能、生物降解性能及潜在应用,探讨此类聚酯的高效聚合反应工艺及构效关系。异己糖醇结构单元的引入可有效提高聚合物的玻璃化转变温度,以及促进其水解和生物降解性能,在构建具有更高性能的环境友好型聚酯方面具有较高潜力,有望应用于工程塑料、纤维、生物医药等领域。此类生物基聚酯的大规模商业化需进一步开发更高效、温和的聚合反应工艺以攻克其热敏感和热降解问题。     

聚酯类增塑剂的合成与应用研究进展

综述了国内外聚酯增塑剂的合成及应用的最新研究进展，重点介绍了超支化、生物基、石油基聚酯增塑剂的合成与制备方法以及不同类型聚酯增塑剂在聚氯乙烯(PVC)、淀粉、聚乳酸、聚氨酯弹性体与橡胶制品中的最新应用研究进展；并对聚酯增塑剂未来发展方向做了展望。     

Chemistry of multifunctional polymers based on bis-MPA and their cutting-edge applications

Polymers play an important role in the advancement of materials for use in cutting-edge applications. A direct consequence of an increased demand for more sophisticated materials has been a drive toward developing polymers that exhibit a higher level of structural control, especially in terms of the number and type of functionalities provided within the polymer framework. A family of polymers that meets such a challenge is based on the readily available AB₂ monomer 2,2-bismethylolpropionic acid (bis-MPA) building block. Due to the ease with which the monomers can be synthesized, an array of multifunctional polymers have been produced including monodisperse dendrimers and dendrons and well-defined linear polymers as well as linear-dendritic hybridizations. This review outlines the evolution of the synthetic strategies for developing novel polymeric architectures based on bis-MPA and their assessment in both solution and substrate-based innovative applications.     

羽绒棉纤维的性能测试及其静态热性能研究

测试了羽绒棉纤维(细旦涤纶)的直径、纤度、强力,分析了纤维的应力松弛和蠕变性能对时间的依赖性及定伸长变形性,比较了其与木棉纤维的静态热性能,结果表明:羽绒棉纤维纤度平均值为0.8 dtex;60 s内应力松弛和蠕变率增加,对时间依赖性强;羽绒棉纤维的塑性变形率高;与木棉纤维相比,羽绒棉纤维在较高温度区域的导热性比木棉纤维的好,而降温速率明显低于木棉纤维。     

直纺亮光抗倒伏波浪扁平涤纶FDY的开发

探讨了直纺83 dtex/114 f波浪扁平涤纶全拉伸丝(FDY)的工艺制备过程。试验证明,在熔体输送温度276~282℃,纺丝温度286~290℃,喷丝板规格DIO φ104 mm-114孔、"王"字形,环吹风压10~15 Pa,含油率1.1%~1.2%,卷绕速度3 800~4 200 m/min的工艺参数下纺制83 dtex/114 f波浪扁平涤纶FDY时,生产稳定,满卷率高,外观情况良好,袜带均匀亮丽,可批量生产。此新产品可用于制作高档布艺沙发表层面料,具有抗倒伏、色彩艳丽等功效。     

气化灰基腻子粉的制备与性能研究

为实现气化灰综合利用和降低腻子粉制备成本，研究了利用气化灰替代水泥制备腻子粉的技术可行性。以气化灰和 42.5水泥为主要原料，配以少量的羟丙基甲基纤维素和可分散性乳胶粉，制备气化灰基腻子粉，实验考察原料配方变化对腻子粉的性能影响。研究结果表明：利用气化灰替代水泥制品制备腻子粉具有可行性。其中，气化灰替代 50%水泥时，腻子粉的粘结强度为 0.82 Mpa，各项性能均优于建筑外墙用腻子粉标准 JG/T 157—2009要求。在相同条件下，气化灰替代不超过 70%的水泥时，腻子粉的粘结强度及其他指标均满足建筑外墙用腻子粉标准 JG/T 157—2009要求。