Research and demonstration on hydrogen compatibility of pipelines: a review of current status and challenges

Hydrogen transportation by pipelines gradually becomes a critical engineering route in the worldwide adaptation of hydrogen as a form of clean energy. However, due to the hydrogen embrittlement effect, the compatibility of linepipe steels and associated welds with hydrogen is a major concern when designing hydrogen-carrying pipelines. When hydrogen enters the steels, their ductility, fracture resistance, and fatigue properties can be adversely altered. This paper reviews the status of several demonstration projects for natural gas-hydrogen blending and pure hydrogen transportation, the pipeline materials used and their operating parameters. This paper also compares the current standards of materials specifications for hydrogen pipeline systems from different parts of the world. The hydrogen compatibility and tolerance of varying grades of linepipe steels and the relevant testing methods for assessing the compatibility are then discussed, and the conservatism or the inadequacies of the test conditions of the current standards are pointed out for future improvement.     

一种新型的室温快速固化胶黏剂的研制

本文开发了一种新型的方舱夹芯板用室温固化高强度环氧结构胶黏剂,验证了其物化特性、相关力学性能和环境适应性。结果表明此胶黏剂具有优良性能,可以满足方舱用大板胶黏剂的使用需求。     

Behaviour of 54.4SiO2-13.7Na2O-1.7K2O-5.0CaO-12.4MgO-0.6Y2O3-11.3Al2O3-0.9B2O3 HT-SOFC glass sealant under oxidising and reducing atmospheres

The behaviour of the promising glass sealant 54.4SiO₂-13.7Na₂O-1.7K₂O-5.0CaO-12.4MgO-0.6Y₂O₃-11.3Al₂O₃-0.9B₂O₃ for solid oxide fuel cells (SOFCs) under SOFC operating conditions was studied. First, the kinetics of the crystallisation processes at the operating temperature (850 °C) was discussed (maximum exposure time of 1000 h), and the effect of crystallisation on the coefficient of thermal expansion (CTE) of the sealant was studied. Furthermore, the degradation processes at the interface of the glass sealant and functional SOFC materials (Crofer 22 APU, YSZ, and NiO(Ni)-YSZ) during exposure to 850 °C in oxidising and reducing atmospheres for 500 h were studied. The tests demonstrated good performance of the sealant studied and possibility of its application in SOFCs.     

基于多内核兼容的国网安全浏览器关键技术研究

为解决国家电网有限公司工作人员日常工作中操作业务系统时因浏览器版本问题遇到的各种困扰,文章研究了基于多内核兼容的国网安全浏览器关键技术。通过设计研发多内核企业级浏览器,采用Chromium多进程模型,实现Chrome和IE多内核浏览。在此基础上,详细描述使用国密算法进行浏览器安全加固技术的详细做法。测试结果表明,该安全浏览器有效解决了兼容和安全问题,实现单一浏览器兼容所有业务系统,提升客户端操作体验,降低信息化系统开发和运维成本,为国家电网有限公司信息化建设发展提供扎实基础。     

Crystal structure and functional properties of Nd1.6Ca0.4Ni1-yCuyO4+δ as prospective cathode materials for intermediate temperature solid oxide fuel cells

Complex oxides Nd_1.6Ca_0.4Ni_1-yCu_yO_4+δ (y = 0.0–0.4) have been prepared by a pyrolysis of glycerol-nitrate compositions. According to the X-ray diffraction analysis, the materials are single-phase up to y = 0.3 and crystallize in an orthorhombic structure (Bmab) at room temperature. High-temperature studies assert that they all undergo a phase transition from orthorhombic to tetragonal (I4/mmm) structure in a range of 300–400 °C. With Cu doping, the over-stoichiometric oxygen content δ decreases from 0.07 (y = 0.0) down to 0.00 (y = 0.3). The studies on the compact samples reveal the maximum value of total conductivity (165 S cm^?1 at 420 °C) and the minimum value of the linear coefficient of thermal expansion (11.9·10^?6 K^?1 in a range of 400–1000 °C in air) at y = 0.2. Chemical compatibility of the Nd_1.6Cа_0.4Ni_1-yCu_yO_4+δ (y = 0.0, 0.2) oxides with oxygen- and proton conducting electrolytes (Ce_0.9Gd_0.1O_1.95, Ce_0.8Sm_0.2O_1.9 and BaCe_0.5Zr_0.3Y_0.1Yb_0.1O_3-δ) up to a temperature of 1100 °C is demonstrated.     

Control of the particle microstructure during the synthesis of bulk-polymerized transparent methacrylate-acrylonitrile-butadiene-styrene resin

A series of methacrylate-acrylonitrile-butadiene-styrene (MABS) resins was prepared using bulk polymerization. The polarity of the continuous phase and the compatibility of two phases were changed by adjusting the methyl methacrylate (MMA) content, choosing values that were close to styrene-butadiene rubber solubility value. The possibility of controlling the microstructure of the MABS resin by changing the polarity of the components and the compatibility of two phases was assessed. The dynamic mechanical analysis shows that the compatibility of two phases varies with the MMA content. The morphological analysis shows that increasing MMA contents results in a gradual decrease in the sub-inclusion structure with a network skeleton of rubber particles, and that all the particles become solid rubber when the MMA content reaches 75%. The sub-inclusion structure reappears but does not have a network skeleton when the MMA content is 90%. The impact strength and morphological analysis indicate that the solid rubber particles and the sub-inclusion structure with a network skeleton provide excellent toughness, while the sub-inclusion structure without a network skeleton does not. In contrast, the transmittance of the ABS resin first increased and then decreased with increasing MMA content.     

电子调速器控制器的电磁兼容分析与试验验证

基于辐射发射的形成机理,以某型号电子调速器控制器为目标,利用EMSCAN电磁干扰扫描系统对控制器进行近场辐射测试,总结出一套切实可行的辐射发射分析与试验验证方法.在此基础上,对该型号电子调速器控制器进行了整改设计,并进行了试验验证.结果 表明:基于EM-SCAN系统的分析及整改方法效果明显,缩短了电子产品电磁兼容问题的整改设计周期,并节约了测试成本.     

Control-faced dynamics with deformation compatibility for a 5-DOF active over-constrained spatial parallel manipulator 6PUS–UPU

Taking into account the effect of structural compliance, inverse dynamics of the active over-constrained parallel manipulator 6PUS–UPU with five degrees of freedom is solved in this article. Firstly, the relationship between driving forces and actuated force screws of each limb is derived. Then the coordination of elastic deformation between limbs which consider the effect of gravity and inertia is acquired. Finally the unique solution of driving forces for the active over-constrained parallel manipulator is derived by incorporating the force equilibrium equation of the moving platform. To validate the theoretical derivation, dynamics simulation model of manipulator based on rigid–flexible mixed structure is shown and numerical examples are given. Comparison with the traditional method of dynamics based on pseudo-inverse is also made. Finally, a feasible experimental method, as an effective test to the theoretical calculation, is proposed and applied on the prototype.     

煤矿安全监控系统的发展简述

煤矿安全监控系统是煤矿日常安全管理和灾害防治不可或缺的安全装备,然而现有安全监控系统普遍存在网络结构可靠性差、抗干扰能力弱、数字化程度低、兼容性差、智能化水平低等问题。结合监控系统升级改造的具体要求,对我国煤矿安全监测监控系统的现状,包括存在的主要问题进行了论述,并对系统升级改造后的变化及未来的发展趋势进行了探讨。分析表明,基于工业太环网、数字总线双重冗余结构的新一代全数字式煤矿安全监控系统集多主通讯、智能传感、电磁兼容等多项关键技术于一体,满足监控系统数字化、智能化以及网络化的升级改造要求,也是未来监控系统的发展趋势。新系统的应用可有效提高煤矿的防灾抗灾能力,为煤矿的安全生产提供保障。     

A Modular Solder System with Hierarchical Morphology and Backward Compatibility

A modular solder system with hierarchical morphology and micro/nanofeatures in which solder nanoparticles are distributed on the surface of template micropowders is reported. A core–shell structure of subsidiary nanostructures, which improved the intended properties of the modular solder is also presented. In addition, polymer additives can be used not only as an adhesive (like epoxy resin) but also to impart other functions. By combining all of these, it is determined that the modular solder system is able to increase reflowability on a heat‐sensitive plastic substrate, oxidation resistance, and electrical conductivity. In this respect, the system could be readily modified by changing the structure and composition of each constituent and adopting backward compatibility with which the knowledge and information attained from a previously designed solder can offer feedback toward further improving the properties of a newly designed one. In practice, In–Sn–Bi nanoparticles engineered on the surface of Sn–Zn micropowders result in pronounced reflowing on a flexible Au‐coated polyethylene terephthalate (PET) substrate even at the low temperature of 110 °C. Depending on their respective concentrations, the incorporation of CuO@CeO₂ nanostructures and poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) polymers increases oxidation resistance and electrical conductivity of the modular solder.