Heat and mass transfer flow over a stretching surface with Ohmic heating and chemical reaction

The present study analyzes the effect of chemical reaction on an unsteady magnetohydrodynamic boundary layer viscous fluid over a stretching surface embedded in a porous medium with a uniform transverse magnetic field. A Darcy‐Forchheimer drag force model is employed to simulate the effect of second‐order porous resistance. Dissipative heat energy based on both viscous and Joule dissipation along with a heat source/sink is considered to enhance the energy equation. Similarity analysis is imposed to transform the governing differential equations into a set of nonlinear coupled ordinary differential equations. These sets of equations are solved numerically using the Runge‐Kutta fourth‐order scheme followed by the shooting algorithm. The effects of physical parameters such as magnetic field, Prandtl number, Eckert number, Schmidt number, unsteadiness parameter, and chemical reaction parameters have been discussed on velocity, temperature, and concentration fields. Computation for the coefficient of skin friction, rate of heat and mass transfer is done and presented in a table for validation of the present outcomes.     

Statistical design of sustainable composites from poly(lactic acid) and grape pomace

Biocomposites from poly(lactic acid) (PLA) and grape pomace (GP) were created via injection molding to examine the effects of GP in a PLA matrix. To optimize the mechanical performance the biocomposites were compatibilized with maleic anhydride grafted PLA (MA-g-PLA). The objective of this work was to create a model that could accurately predict the mechanical properties of GP/PLA biocomposites. A region of feasibility for the biocomposites was determined using a statistical design of experiments. Linear regression was used to model the mechanical performance and predicted results with an error of 10% for both tensile and flexural strength and 16% for impact strength. The model was verified with a biocomposite of PLA/GP/MA-g-PLA with a ratio of 62/36/2. This biocomposite had a tensile strength, flexural modulus, and impact strength of 25.8 MPa, 40.0 MPa, and 18.4 J/m, respectively. It was found that a linear model can accurately predict the mechanical properties of PLA/GP/MA-g-PLA biocomposites.     

Modified Two-Phase Titration Methods to Quantify Surfactant Concentrations in Chemical-Enhanced Oil Recovery Applications

In enhanced oil recovery applications, surfactants are injected into reservoirs along with polymers and salts. The effluents eluted from lab experiments and field tests are analyzed by HPLC methods using an evaporative light scattering detector (ELSD) detector. When the surfactant concentrations are less than 100 ppm, HPLC methods are inaccurate. A novel two-phase titration method is developed where surfactant concentrations can be quantified using a calibration curve constructed with UV/vis absorption. This method can analyze surfactant concentrations 5–80 ppm where dilution eliminates any high-salinity interferences with the absorption measurements. The method is based on formation of a dye-surfactant complex and the light absorption of the complex has a linear correlation with the surfactant concentration. Anionic surfactant concentrations lower than 100 ppm can be accurately quantified using this method with methylene blue. The method was also developed for low concentrations (<50 ppm) of cationic surfactants using methyl orange and indigo carmine. The indigo carmine method can be used without the use of an organic phase. All methods are applicable at salinities up to 3 wt%. Both the methylene blue method and the methyl orange method can be used to detect zwitterionic surfactants. These methods can be used in the presence of polymers without any prior treatments.     

Assessment of relative impacts of various geo-mining factors on methane dispersion for safety in gassy underground coal mines: an artificial neural networks approach

Neural Computing and Applications - Dispersing methane to a safer level is crucial for mines safety as methane has been the greatest contributor of explosion hazard in underground coal mines...     

Sustainable biocarbon as an alternative of traditional fillers for poly(butylene terephthalate)-based composites: Thermo-oxidative aging and durability

Sustainable biocomposites have gained considerable interest as an alternative to conventional composites in recent years due to their cost-effectiveness and environmental friendliness. The aim of this study was to investigate the performance and durability behavior of biocomposites from sustainable biocarbon (BC) as compared to conventional established fillers. The poly(butylene terephthalate) (PBT) and its composites reinforced with BC, talc, and glass fiber (GF) were prepared and the durability performances was investigated. The study showed that BC/PBT biocomposites provided a lighter weight alternative to traditionally used fillers. After undergoes thermo-oxidative aging, the mechanical properties of BC/PBT biocomposite were deteriorated. The GF/PBT showed the most stable in retaining its mechanical properties in comparison to the talc/PBT and BC/PBT. The aging behavior and mechanism of the PBT composites were discussed. This study provides further insight on the durability-related properties progression of biocomposites as compared to traditional used fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47722.     

Hydrogen production from thermal decomposition of ammonia-contaminated acid gas using a detailed reaction mechanism

The increase in the production of acid gas consisting of H₂S, CO₂, and associated impurities such as ammonia and hydrocarbons from oil and gas plants and gasification facilities has stimulated the interest in the development of alternative means of acid gas utilization to produce hydrogen and sulfur, simultaneously. The present literature lacks a detailed reaction mechanism that can reliably predict the thermal destruction of NH₃ and its blend with H₂S and CO₂ to facilitate process optimization and commercialization. In this paper, a detailed mechanism of NH₃ pyrolysis is developed and is merged with the reactions of NH₃ oxidation and H₂S/CO₂ thermal decomposition from our previous works. The mechanism is validated successfully using different sets of experimental data on the pyrolysis and oxidation of NH₃, H₂S, and CO₂. The proposed mechanism predicts the experimental data on NH₃ pyrolysis remarkably better than the existing mechanisms in the literature. The mechanism is used to investigate the effects of NH₃ concentration (0–20%) and reactor temperature (1000–1800 K) on the thermal decomposition of H₂S and CO₂. A synergistic effect is observed in the simultaneous decomposition of NH₃ and CO₂, i.e., NH₃ conversion is improved in the presence of CO₂ and the decomposition CO₂ to CO is enhanced in the presence of NH₃. The presence of H₂S suppressed NH₃ conversion, while the conversion of H₂S remained unchanged with increasing NH₃ concentration at temperature below 1400 K due to the low conversion of NH₃ (up to 18%). At temperature above 1400 K, NH₃ conversion increased rapidly and it triggered a decrease in H₂S conversion as well as the yields of H₂ and S₂. The major reactions involved in the decomposition of H₂S, CO₂, and NH₃ and the production of major products such as H₂, S₂, and CO are identified. The detailed reaction mechanism can facilitate the design and optimization of acid gas thermal decomposition to produce hydrogen and sulfur, simultaneously.     

Comparison in composite performance after thermooxidative aging of injection molded polyamide 6 with glass fiber,talc, and a sustainable biocarbon filler

Degradation is an unavoidable part of a material's life making it important to both monitor and control the aging behavior of plastics. This study compares thermooxidative degraded composites of a novel bio-based and sustainable filler, Biocarbon (MBc), against that of traditional and commercially available fillers (glass fiber and talc) used in the automotive industry. The influence of thermooxidative degradation on the composites was studied under accelerated heat aging for 1000 h at 140°C. The mechanical properties of the composites were evaluated using notched Izod impact as well as both tensile and flexural tests. Morphological structure of the composites was investigated using a scanning electron microscopy. Dynamic mechanical analysis and differential scanning calorimetry were used to evaluate the physical transitions both before and after aging. The glass-filled composites displayed the best performance; while, both the talc and biocarbon composites possessed similar strength and ductility performances. Advantageously, the biocarbon composites experienced an 11% reduction in density as compared to talc-filled composites with similar weight content. After aging, all composites exhibited reduced tensile and flexural strengths ranging from 5 to 67% partly due to chain scission. Whereas, the modulus of all composites increased with a range of 1–24% due to an annealing effect. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48618.     

Electrochemical inspection of polypyrrole/chitosan/zinc oxide hybrid composites

Polymer nanocomposite composed of polypyrrole, chitosan, and zinc oxide nanoparticles has been synthesized and it has been evaluated for various electrochemical aspects of the current electrochemical industry. The polypyrrole (PPy) was synthesized by the chemical oxidative polymerization reaction by employing ammonium persulfate as oxidizing agent. Composites of polypyrrole/chitosan (PPy/Chy) and polypyrrole/chitosan/ZnO (PCZ) composites were synthesized by the solution blending method. Detailed structural, morphological, thermal characterization of PPy, PPy/Chy, and PCZ were performed to characterize the specific features of the systems. The composites exhibit better thermal stability and high surface area and the addition of ZnO nanoparticle increase the crystallinity of the composite. Electrochemical characterization of the ITO electrodes modified with PPy, PPy/Chy, and PCZ were performed using cyclic voltammetry, electrochemical impedance spectroscopy, and amperometry techniques. The present study highlights the role of a bio-compatible material with high surface area and conductive constituent for designing of various high performing electronic noninvasive sensors, biosensors, and so forth.     

Effect of silane treated fly ash on physico-mechanical,morphological, and thermal properties of recycled poly(vinyl chloride) composites

The silane treatment on properties of fly ash (FA) and development of its composite using recycled poly(vinyl chloride) (r-PVC) material retrieve from waste wires and cable insulation are investigated in this work. The use of (3-aminopropyl)triethoxysilane was employed as a coupling agent with some other essential additives. The composites sheet was prepared by means of the melt mixing process and go along with the compression molding process. The superior properties on compatibility between silane-modified FA (FA(Si)) and r-PVC were successfully studied using rheological, thermomechanical, morphological, and water absorption analysis. Primary analysis of r-PVC and FA was employed using Fourier transform infrared spectroscopy analysis. The thermal stability of composites was stable up to 187°C. In addition, significant enhancement on tensile strength as well as young's modulus of composite as compared to untreated r-PVC/FA composites. Morphological properties of silane treated FA based composites presented the good distribution and excellent uniformity with higher wettability of FA particles within r-PVC matrix. The water absorption test showed decrease in water absorption with increase silane treatment concentration FA in the r-PVC matrix. It was remarkable to note that silane treated FA can be prepared as a composite using r-PVC matrix with further modified properties.