Analytical Modeling of Threshold Voltage for Dual-Metal Double-Gate Gate-All-Around (DM-DG-GAA) MOSFET

Silicon - This paper presents, analytical modeling of surface potential,threshold voltage and DIBL for a Dual-Metal Double-Gate Gate-All-Around (DM-DG-GAA) MOSFET considering the parabolic...     

Feasibility of Using Di-Dodecyl-Di-Octyl Diglycolamide for Partitioning of Minor Actinides from Fast Reactor High-Level Liquid Waste

The unsymmetrical diglycolamide, di-dodecyl-di-octyl diglycolamide (D³DODGA) is a modifier-free extractant proposed for partitioning of trivalent actinides from nitric acid medium. D³DODGA has been evaluated for the feasibility of using it in the absence of a phase modifier, for the partitioning of minor actinides from fast reactor high-level liquid waste (FR-HLLW). The extraction behavior of various metal ions present in the simulated FR-HLLW was studied in a solution of 0.1 M D³DODGA/n-dodecane from nitric acid medium. The distribution ratio of about 20 metal ions was measured as a function of concentration of nitric acid and other interfering ion. The extraction was found to be strongly dependent on the oxidation state of the metal ion. The extraction of Am(III) from 3–4 M nitric acid medium was quantitative in a single contact. However, it was accompanied by the quantitative extraction of fission products such as trivalent lanthanides (Ln(III)), Y(III), and Zr(IV). The extraction of Sr(II), Pd(II), and Ru(III) in 0.1 M D³DODGA/n-dodecane was not insignificant, but quite low. The extraction of Ba(II), Ni(II), Mo(VI), and Fe(III) was marginal and the extraction of Co(II), Sb(III), Mn(II), and Cs(I) in 0.1 M D³DODGA/n-dodecane was negligible. Our results indicated that 0.1 M D³DODGA/n-dodecane is a promising candidate for the separation of trivalent actinides from fast reactor high-level liquid waste containing significant quantities of trivalent lanthanides and actinides.     

Extraction Behavior of Some Actinides and Fission Products from Nitric Acid Medium by a New Unsymmetrical Diglycolamide

Abstract

A new unsymmetrical diglycolamide, N,N-di-2-ethylhexyl-N',N'-di-octyl-3-oxapentane-1,5-diamide, trivially known as di-ethylhexyl-di-octyl-diglycolamide (DEHDODGA) has been synthesized, and characterized by ¹H, and ¹³C nmr, mass, and IR spectroscopy. Extraction behavior of ²⁴¹Am(III), ^(152+154)Eu(III), ²³⁹Pu(III), ²³⁹Pu(IV), ²³³U(VI), ¹³⁷Cs(I), and ^(85+89)Sr(II) from nitric acid medium by a solution of DEHDODGA in n-dodecane was studied, at 298–333 K. The effect of concentrations of HNO₃ and DEHDODGA and of temperature on the distribution ratio (D _M) was studied. Extraction of Eu(III), Am(III), Pu(III), and Pu(IV) increased with increase in nitric acid concentration, and the distribution ratio of Cs(I) was insignificant. However, the distribution ratios of U(VI) and Sr(II), though not insignificant, but was quite less compared to trivalents, and Pu(IV). The D _Sr(II) increased with increase in the concentration of nitric acid, reaching a maximum at 4 M followed by decrease. The stoichiometry of Am(III) – DEHDODGA was determined by slope analysis of extraction data, and the enthalpy change accompanied by the extraction of Eu(III), Pu(III), and Am(III) was determined and reported in this article.     

Hardware‐efficient approximate logarithmic division with improved accuracy

Among all the arithmetic operations, division operation takes most of the clock cycles resulting in more path delay and higher power consumption. Many algorithms, including logarithmic division (LD), have been implemented to reduce the critical path delay and power consumption of division operation. However, there is a high possibility to further reduce these vital issues by using the novel approximate LD (ALD) algorithm. In the proposed ALD, a truncation adder is used for mantissa addition. Using this adder, the power delay product (PDP) and normalized mean error distance (NMED) are minimized. From the error analysis and hardware evaluation, it is observed that the proposed ALD using truncation adder (ALD‐TA) with an appropriate number of inexact bits achieve lower power consumption and higher accuracy than existing LDs with exact units. The normalized mean error distance of 8‐, 16‐, and 32‐bit ALD‐TA is compared with LDs of same bits and observed a decrease of up to 21%, 20%, and 21%, and the PDP has a reduction of up to 33%, 51%, and 72%, respectively. Application of ALD‐TA to image processing shows that high performance can be achieved by using ALDs than exact LDs.     

Solvent extraction behavior of trivalent metal ions in diglycolamides having same carbon to oxygen ratio

Various diglycolamides (DGAs), N,N,N’,N’-tetraoctyl diglycolamide (TODGA), N,N-di-2-ethylhexyl-N’,N’-di-octyl diglycolamide (DEHDODGA), N,N,N’,N’-tetra-2-ethylhexyl diglycolamide (TEHDGA), N,N-di-decyl-N’,N’-di-hexyl diglycolamide (D²DHDGA), N,N-di-butyl-N’,N’-di-dodecyl diglycolamide (DBD³DGA), N,N,N’,N’-tetra-hexyl diglycolamide (THDGA), and N,N,N’,N’-tetradecyl diglycolamide (TDDGA) have been synthesized and studied for the extraction of Am(III) and Eu(III) from nitric acid medium. An attempt was made to understand the extraction and third phase formation behavior of trivalent metal ions in these DGAs. Our results revealed that despite having the same carbon to oxygen ratio in these DGAs, the third phase formation behavior and extractions achieved in these DGAs are significantly different.