光诱导作用对木霉菌产孢量的影响研究

通过固体发酵和液体发酵,对比研究了光诱导作用对8株木霉菌菌株产孢量的影响。结果表明,在固体发酵条件下,50～200 Lux蓝光照射能显著提高菌株Tr673、TL02、Tr25、Tr775的产孢量(P≤0.01);菌株Tr673、TL02、Tr25、Tr775在避光处理36 h后再进行蓝光照射的产孢量较持续光照显著降低(P≤0.01)。在液体发酵条件下,菌株Tr673、TL02、Tr25、Tr775在100～200 Lux白光或蓝光照射下的产孢量较避光处理提高数倍(P≤0.01),较其它光源照射提高2～8倍;100～200 Lux蓝光照射能显著提高Tr673、TL02、Tr775的产孢量(P≤0.01),但对Tr25的产孢量提高不明显。     

界面聚合聚酰胺纳滤膜渗透选择性能优化的研究进展

纳滤因其分离效率高、操作压力低、环境友好等优点，在废水处理、海水淡化和工业分离纯化等众多领域有着重要的应用。界面聚合法制备的聚酰胺（PA）纳滤膜是最为常用的纳滤膜种类之一。然而界面聚合反应速度快，如何通过调控界面聚合过程，优化纳滤膜选择分离层的结构从而提高渗透选择性，以满足不同领域对纳滤膜需求仍是亟需解决的问题。本文从影响界面聚合单体扩散因素的角度出发，综述了近年来PA纳滤膜渗透选择性能优化的研究进展，包括新型PA纳滤膜、纳米材料/PA混合基质膜及超薄PA纳滤膜3个方面，探讨了选择分离层结构调控与纳滤膜渗透选择性能优化的关系，最后指出目前界面聚合制备高渗透选择性PA纳滤膜在规模化、稳定性及可控性存在的问题，并对未来界面聚合纳滤膜在微观结构和聚合过程调控方面的研究进行了展望。     

In vitro model to assess the adsorption of oral veterinary drugs to mycotoxin binders in a feed- and aflatoxin B1-containing buffered matrix

Mycotoxin binders are feed additives which are mixed in the feed to adsorb mycotoxins and thereby reducing their toxic effects on animals. Interactions with orally administered veterinary medicinal products, such as antimicrobials or coccidiostats, have been reported previously. This paper describes an in vitro model to screen the interaction between mycotoxin binders and veterinary drugs with respect to the non-specific binding of drugs. It is designed as a static setup using a single concentration of drug and binder in a feed-containing or a feed-plus-mycotoxin-containing matrix, buffered at different pH values. The model was applied to two frequently used antimicrobials in veterinary medicine, doxycycline (DOX) and tylosin (TYL), one major mycotoxin, aflatoxin B1 (AFB1), and four mycotoxin binders. Proportions of feed, DOX or TYL, AFB1, and binder are equivalent to the in vivo situation for broiler chickens, while pH and volume of the buffer are representative of the gastrointestinal tract of chickens. A substantial binding of DOX (~ 88%) and TYL (~ 66%) to the feed-matrix was observed. For the mycotoxin binders, similar results were obtained for DOX and TYL; more specifically up to an inclusion rate of 20 g binder/kg feed, no significant binding was demonstrated, determined as the free concentration of DOX and TYL. A single exception was noticed for TYL and one specific bentonite-based mycotoxin binder, for which no significant interaction could be demonstrated up to 10 g binder/kg but there was an effect at 20 g/kg. In all cases, there was no competition between the tested drugs DOX or TYL and the mycotoxin AFB1 for binding to the bentonite-based mycotoxin binder.     

直纺亮光抗倒伏波浪扁平涤纶FDY的开发

探讨了直纺83 dtex/114 f波浪扁平涤纶全拉伸丝(FDY)的工艺制备过程。试验证明,在熔体输送温度276~282℃,纺丝温度286~290℃,喷丝板规格DIO φ104 mm-114孔、"王"字形,环吹风压10~15 Pa,含油率1.1%~1.2%,卷绕速度3 800~4 200 m/min的工艺参数下纺制83 dtex/114 f波浪扁平涤纶FDY时,生产稳定,满卷率高,外观情况良好,袜带均匀亮丽,可批量生产。此新产品可用于制作高档布艺沙发表层面料,具有抗倒伏、色彩艳丽等功效。     

A new one-phase material model for the numerical prediction of critical material flow conditions in thixoforging processes

Thixoforging allows one-step forming processes of near-net shape components having excellent mechanical properties. However, the high sensitivity of thixoforging regarding process conditions requires precise modelling and determination of process related parameters. At the same time, simple numerical design proves challenging because of the inaccuracy of existing one-phase material models regarding the shear thinning flow behaviour of semi solid metals. Consequently, this paper deals with the development of a new one-phase material model providing a more precise simulation of materials’ shear rate dependency. By using this model, simulations could be performed, which allowed the prediction of solidification and flow-related component defects.     

Hot corrosion Type II of FeCr‐based model alloys for boiler and heat exchanger applications

The hot corrosion Type II of the alloys FeCr20, FeCr20Ni10, FeCr20Ni20, and FeCr20Co10 is investigated at 700°C in air + 0.5% SO₂ with deposits consisting of Na₂SO₄ and a eutectic mixture of Na₂SO₄ and MgSO₄ for 24, 100, and 300 h. The alloying elements nickel and cobalt have a positive influence when tests are conducted using a MgSO₄‐Na₂SO₄ deposit. In this case, they reduce the metal loss and increase the time to the propagation stage. In contrast, when the alloys are exposed with a Na₂SO₄ deposit, these alloying elements increase the metal loss and allow for the transition to the propagation stage because they can form molten phases with the Na₂SO₄. During the incubation stage an oxide scale forms on the FeCr20 alloy, which is thicker than the one formed during exposure without a deposit, and iron oxides are observed, which precipitate in the deposit. The propagation stage occurs by a dissolution and precipitation mechanism forming localized pitting attack. Iron is the main species that dissolves and precipitates, while chromium remains mainly as an oxide beneath the initial surface. The additional elements are found in the pit and in the salt deposit.