Entropy generation minimization on electromagnetohydrodynamic radiative Casson nanofluid flow over a melting Riga plate

Minimizing entropy generation is a technique that helps improve the effectiveness of real processes by studying the associated irreversibility of system performance of nanofluid. This study examines the entropy generation analysis of electromagnetohydrodynamic radiative Casson flow induced by a stretching Riga plate in a non-Darcian porous medium under the influence of internal energy change, Arrhenius activation energy, chemical reaction, and melting heat transfer. The thermophysical features of the fluid are assumed constant in most of the literature. However, this current research bridges this gap by considering viscosity, conductivity, and diffusivity as temperature-dependent variables. Also, the exponential decaying Grinberg term is used as a resistive force in this investigation due to the electromagnetic properties of the Riga plate in the momentum conservation equation. Some suitable dimensionless variables are introduced to remodel the transport equations into unitless ones and then solved numerically by employing Galerkin Weighted Residual Method. Analyses reveal that the Casson parameter declines the fluid velocity, while the existence of the melting parameter has the opposite effect. Also, this article includes some future recommendations.     

A hybrid homogeneously weighted moving average control chart for process monitoring: Discussion

The sensitivity of a monitoring scheme depends on many factors including the variance of the charting statistic which is very important in the computation of the control limits. This paper discusses the computation of the variance of the recently proposed hybrid homogeneously weighted moving average (HHWMA) $\overline{X}$ scheme which was based on an incorrect assumption. The correct variance is used to evaluate the run-length characteristics of the HHWMA $\overline{X}$ scheme. It is observed that the incorrect variance has a significant impact on the sensitivity (or performance) of the HHWMA $\overline{X}$ scheme.     

A hybrid homogeneously weighted moving average control chart for process monitoring

Several modifications and enhancements to control charts in increasing the performance of small and moderate process shifts have been introduced in the quality control charting techniques. In this paper, a new hybrid control chart for monitoring process location is proposed by combining two homogeneously weighted moving average (HWMA) control charts. The hybrid homogeneously weighted moving average (HHWMA) statistic is derived using two smoothing constants λ₁ and λ₂ . The average run length (ARL) and the standard deviation of the run length (SDRL) values of the HHWMA control chart are obtained and compared with some existing control charts for monitoring small and moderate shifts in the process location. The results of study show that the HHWMA control chart outperforms the existing control charts in many situations. The application of the HHWMA chart is demonstrated using a simulated data.     

Antioxidant potential of extracts from peels and stems of yellow-fleshed and white cassava varieties

This study focused on the exploration of the potentials of extracting antioxidants from peels and stems of yellow-fleshed and white cassava varieties. The effect of particle size (0.2 and 0.5 mm) and variety on the phenolic content and antioxidant activity was assessed. The peels of the yellow-fleshed cassava variety with a particle size of 0.2 mm showed the highest phenolic content with 681.5 GAE mg 100 g⁻¹ and antioxidant activity of 19% and 425 μM TE g⁻¹ dry matter using DPPH and FRAP assays respectively. The stems of the white cassava with a particle size of 0.2 mm exhibited high phenolic content (442.4 GAE mg 100 g⁻¹) and antioxidant activity of 12.8% and 234 μM TE g⁻¹, better than the stem of the yellow-fleshed cassava. These results indicate that phenolic and antioxidant extractions were influenced by variety, the plant parts and particle size for the antioxidant assays.     

Comparative performance analysis of solar powered supercritical-transcritical CO2 based systems for hydrogen production and multigeneration

CO₂ based power and refrigeration cycles have been developed and analyzed in different existing studies. However, the development of a CO₂ based comprehensive energy system and its performance analysis have not been considered. In this study, the integration of a CO₂ based solar parabolic trough collector system, a supercritical CO₂ power cycle, a transcritical CO₂ power cycle, and a CO₂ based cascade refrigeration system for hydrogen production and multigeneration purpose is analyzed thermodynamically. This study aims to analyze and compare the difference in the thermodynamic performance of comprehensive energy systems when CO₂ is used as the working fluid in all the cycles with a system that uses other working fluids. Therefore, two comprehensive energy systems with the same number of subsystems are designed to justify the comparison. The second comprehensive energy system uses liquid potassium instead of CO₂ as a working fluid in the solar parabolic trough collector and a steam cycle is used to replace the transcritical CO₂ power cycle. Results of the energy and exergy performance analysis of two comprehensive energy systems showed that the two systems can be used for the multigeneration purpose. However, the use of a steam cycle and potassium-based solar parabolic trough collector increases the comprehensive energy systems’ overall energy and exergy efficiency by 41.9% and 26.7% respectively. Also, the use of liquid potassium as working fluid in the parabolic trough collectors increases the absorbed solar energy input by 419 kW and 2100 kW thereby resulting in a 23% and 90.7% increase in energetic and exergetic efficiency respectively. The carbon emission reduction potential of the two comprehensive energy systems modelled in this study is also analyzed.     

New carbon composite adsorbents for the removal of textile dyes from aqueous solutions: Kinetic,equilibrium, and thermodynamic studies

New carbon composite materials were prepared by pyrolysis of mixture of coffee wastes and red mud at 700 °C with the inorganic: organic ratios of 1.9 (CC-1.9) and 2.2 (CC-2.2). These adsorbents were used to remove reactive orange 16 (RO-16) and reactive red 120 (RR-120) textile dyes from aqueous solution. The CC-1.9 and CC-2.2 materials were characterized using Fourier transform infrared spectroscopy, Nitrogen adsorption/desorption curves, scanning electron Microscopy and X-ray diffraction. The kinetic of adsorption data was fitted by general order kinetic model. A three-parameter isotherm model, Liu isotherm model, gave the best fit of the equilibrium data (298 to 323 K). The maximum amounts of dyes removed at 323 K were 144.8 (CC-1.9) and 139.5 mg g^?1 (CC-2.2) for RO-16 dye and 95.76 (CC-1.9) and 93.80 mg g^?1 (CC-2.2) for RR-120 dye. Two simulated dyehouse effluents were used to investigate the application of the adsorbents for effluent treatment.     

The policy-planning divide: an evaluation of housing production in the aftermath of operation Murambatsvina in Zimbabwe

There is a very thin line of divide between policy and planning, let alone between policy and politics. In most post-colonial states, the situation has been aggravated by the ruling elites’ determination to divorce themselves completely from colonial practices. This in turn has significantly transformed the policy environment to an extent where its interface with implementation is obscure. This paper examines the policy-planning divide from a housing perspective. It singles out policy issues as well as the political environment as key factors that influence the physical planning environment for housing. Using the case study of housing reconstruction in the aftermath of slum clearance (Operation Murambatsvina/Operation Clean-up) in Zimbabwe, the paper argues that if national policies that impinge on physical planning are not well defined; they can have negative implications on the implementation and outcome of projects. The situation is further complicated by unlimited influence party politics has on physical planning. What emanates from the case study is a mere manifestation of elite decision making driven by the economy of affection. The emerging issues from this discourse clearly show how difficult it is to operate in a public domain riddled by selfish motives.     

Evaluation of the Effectiveness of Water Management Policies in Bangladesh

Water resources development and management policies initiatives in Bangladesh are primarily driven by the need for sufficient food grain production for the country's teeming population and curtailing the perennial flooding problems. It is therefore necessary to investigate whether or not these objectives are being met. The aim of this study is to evaluate the impacts of past water resources development and management strategies on agriculture, food security, flood management and socio-economic development in Bangladesh. The research is based on the historical data of the relevant parameters of the water resources management over the period 1947–2005. The outcomes of the study demonstrate that past policies and strategies of water development have resulted in significant irrigation expansion, especially through intensified groundwater utilization, which has helped to achieve the country's primary objective of self-sufficiency in food production. However, the provision of safe drinking water and sanitation facilities still remains a challenge in the country. Similarly, the impact of the flood control policies was diverse with success mostly apparent with regard to protection against modest events, while catastrophic, extreme events still effectively defying answer.     

Emission of pollutants from wood waste incineration at sawmills in Abeokuta metropolis,Nigeria

This paper reports an assessment of the effects of wood waste burning on air quality and the perceived human health in an urban setting. The concentrations of particulates and selected gases were monitored within the vicinity of sawmills in Abeokuta metropolis. The levels of CO, CO₂, SO₂, NO_x, NO₂, H₂S, CH₄ and particulates at distances from sawmill dumps were measured using portable samplers. Additionally, information on sawmill operations and health problems encountered by the exposed population were collected from a community survey. From the data analyses, between 60 and 100% of wood waste generated by sawmills were burned openly, leading to pollutants emission. The mean concentrations of PM_0.3–0.5 (32 523–40 284 μg/m³), NO₂ (1.0 ppm), SO₂ (3.3 ppm), CO (759 ppm) and CO₂ (4.9%) were higher than the permissible limits at 0–15 m from the dump sites. Almost all sampled parameters showed positive association (R = 0.90–0.98; p < 0.05) at sample sites. Moreover, distance of sites to the dumps explained 51–93% of the variation in parameters levels. Both respiratory and dermal diseases were frequently experienced by the exposed population. Strict land-use zoning, pollution abatement measures, environmental quality monitoring and waste-to-energy interventions are urgently required in the study area.