Numerical and experimental study of conjugate heat transfer in a horizontal air cavity

The demand for general reduction of the energy consumption in civil engineering leads to more frequent use of insulating materials with air gaps or cavities. Heat transfer through a constructional part can be decreased by adding an air gap and low emissivity reflective foils to the structure. In the first part of this paper, the impacts of cavity thickness and inner surface emissivity on combined conduction, convection and radiation heat transfer was experimentally explored in the case of constructional part with a horizontal cavity subjected to constant downward heat flux. The heat flow meter Netzsch HFM 436 Lambda was used for steady-state measurements. Results suggest that the studied parameters seriously affect the combined heat transfer in the composed structure. In the second part the paper reports the numerical study of two-dimensional conjugate heat transfer in closed horizontal cavity having air as the intervening medium. Numerical models validated by related experimental results were performed to further investigate the effect of radiation heat transfer. It was found that in general, the total heat flux through the composed structure decreases with increasing air cavity thickness, which is significant especially when low emissivity inner surfaces are taking into account. The direction of heat flow (downward or upward heat flow) has a significant impact on the convection heat transfer. An important contribution from the present work is the analysis of the optimal thickness of the cavity at different boundary conditions. The optimal thickness of the enclosure with low emissivity surfaces is 16 mm when subjected to upward heat flux.     

Study of Corrosion Behavior and In Vitro Bioactivity of Single NbSi2 and Duplex NbSi2/Nb5Si3 Coatings on Nb Substrates for Biomedical Applications

Protection of Metals and Physical Chemistry of Surfaces - Single NbSi2 and duplex NbSi2/Nb5Si3 coatings were successfully applied on Nb substrates using halide activated pack cementation (HAPC)...     

A Fluorometric Enzymatic Assay for Quantification of Steryl Glucosides in Biodiesel

Steryl glucosides (SG) are common contaminants in biodiesel that form precipitates, which form and cause problems due to fouling during transport and storage. Therefore, their quantification is necessary to assess the quality of this fuel. The methods currently available for SG analysis require expensive instrumentation, need a previous concentration step by solid‐phase extraction (SPE) or are of limited use for the quantitative assessment. We developed an enzymatic method for SG quantification in biodiesel samples based on the hydrolysis of the glucoside catalyzed by a broadly specific beta glucosidase and the subsequent determination of the glucose released by the reaction. The method is non‐expensive, sensitive and was adapted to 96‐well format fluorescence plate reader, making it useful for the parallel assay of multiple samples. The enzymatic assay presented here represent a valuable tool for both quality control and the development of improved biodiesel production and purification procedures.     

Graphene‐based ternary composites for supercapacitors

The research on electrode materials for supercapacitor application continues to evolve as the request of high‐energy storage system has increased globally due to the demand for energy consumption. Over the past decades, various types of carbon‐based materials have been employed as electrode materials for high‐performance supercapacitor application. Among them, graphene is 1 of the most widely used carbon‐based materials due to its excellent properties including high surface area and excellent conductivity. To exploit more of its interesting properties, graphene is tailored to produce graphene oxide and reduced graphene oxide to improve the dispersibility in water and easy to be incorporated with other materials to form binary composites or even ternary composites. Nowadays, ternary composites have attracted enormous interest as 2 materials (binary composites) cannot satisfy the requirement of the high‐performance supercapacitor. Thus, many approaches have been employed to fabricate ternary composites by combining 3 different types of electroactive materials for high‐performance supercapacitor application. This review focuses on the supercapacitive performance of graphene‐based ternary composites with different types of active materials, ie, conducting polymers, metal oxide, and other carbon‐based materials.     

Combined effect of antimicrobial edible coatings with reduction of initial microbial load on the shelf-life of fresh hake (Merluccius merluccius) medallions

Two distinct strategies were combined to preserve fresh fish (Merluccius merluccius) under refrigeration at 4 °C for 12 days: (i) the application of an antimicrobial edible coating enriched with oregano essential oil (OEO) or carvacrol (CV) and (ii) the reduction of initial microbial load by good handling practise and the use of sodium hypochlorite (NaOCl). The action of antimicrobial coatings alone retarded the growth of Enterobacteriaceae, lactic acid bacteria (LAB) and H₂S producing bacteria on fish samples. The reduction of initial microbial load by itself only affected the evolution of LAB, but not the rest of the bacterial groups. When using both techniques combined, edible antimicrobial coatings were significantly more effective with additional and significant delays in the growth of mesophilic, psychrotrophic and Pseudomonas bacteria. Thus, the use of both strategies combined resulted in a reduction of the counts of all bacterial groups after 12 days of storage which ranged from 1.5 log and 8 log, in Pseudomonas and H₂S producing bacteria, respectively. Moreover, no significant differences were observed when comparing the microbiological evolution of samples treated with OEO compared to those only treated with CV.