Use of fluorochrome-labeled rRNA targeted oligonucleotide probe and tyramide signal amplification to improve sensitivity of fluorescence in situ hybridization

A tyramide signal amplification (TSA) system was used in combination with a conventional fluorochrome-labeled 16S rRNA oligonucleotide probe to increase the sensitivity of fluorescence in situ hybridization. TSA was performed after hybridization resulted in a low fluorescence signal intensity. In contrast to the horseradish peroxidase-tyramide signal amplification (HRP-TSA) system and biotin-tyramide signal amplification (biotin-TSA) system, no additional expensive probe labeling was required. A whole cell hybridization technique was used to compare the fluorescence signal obtained using a monolabeled probe with that obtained using the TSA system. The fluorescence signal of the probe obtained using the TSA system was much higher than that obtained using the monolabeled probe. The technique was successfully applied to the in situ detection of microbial communities in anaerobic sludge. It was demonstrated that TSA resulted in an increased in sensitivity, as the fluorescence signal intensity was much higher than that obtained using a conventional probe.     

Photoreflectance study of strained GaAsN/GaAs T-junction quantum wires grown by metal-organic vapor phase epitaxy

Strained GaAsN T-junction quantum wires (T-QWRs) with different N contents grown on GaAs by two steps metal-organic vapor phase epitaxy in [001] and [110] directions, namely QW1 and QW2 respectively, have been investigated by photoreflectance (PR) spectroscopy. Two GaAsN T-QWRs with different N contents were formed by T-intersection of (i) a 6.4-nm-thick GaAs0.89N0.011 QW1 and a 5.2-nm-thick GaAs0.968N0.032 QW2 and (ii) a 5.0-nm-thick GaAs0.985N0.015 QW1 and a 5.2-nm-thick GaAs0.968N0.032 QW2. An evidence of a one-dimensional structure at T-intersection of the two QWs on the (001) and (110) surfaces was established by PR resonances associated with extended states in all the QW and T-QWR samples. It is found that larger lateral confinement energy than 100 meV in both of [001] and [110] directions were achieved for GaAsN T-QWRs. With increasing temperature, the transition energy of GaAsN T-QWRs decreases with a faster shrinking rate compared to that of bulk GaAs. Optical quality of GaAsN T-QWRs is found to be affected by the N-induced band edge fluctuation, which is the unique characteristic of dilute III-V-nitrides.     

Antioxidant and anti-glycation properties of Thai herbal teas in comparison with conventional teas

Fifteen Thai herbal teas in comparison with teas of Camellia sinensis, were studied for their antioxidants and anti-glycation properties in correlation with their total phenolics, flavonoids, and non-flavonoids contents. Significant differences were observed among the tea infusions. Only stevia and sappan herbal teas had primary antioxidants and anti-glycation capacities comparable to C. sinensis. However, purple velvet, mulberry and false mallow herbal teas were exceptionally stronger in metal chelating capacity than the C. sinensis teas. Principal component analysis showed that total phenolics, particularly flavonoids highly correlated with primary antioxidants and anti-glycation. Cluster analysis showed that the properties of stevia and sappan herbal teas were similar to green, black and oolong teas. Some common, but rarely mentioned, Thai herbal teas could be choices of interest for healthy beverages and could be new dietary sources for bioactive compounds.     

Activated carbons derived from sugarcane bagasse for high-capacitance electrical double layer capacitors

Activated carbon (AC) from sugarcane bagasse was prepared using a simple two-step method of carbonization and chemical activation with four different activating agents (HNO₃, H₂SO₄, NaOH, and KOH). Amorphous carbon structure as identified by X-ray diffraction was observed in all samples. Scanning electron microscopy revealed that the AC had more porosity than the non-activated carbon (non-AC). Specific capacitance of the non-AC electrode was 32.58 F g^?1 at the current density of 0.5 A g^?1, whereas the AC supercapacitor provided superior specific capacitances of 50.25, 69.59, 109.99, and 138.61 F g^?1 for the HNO₃ (AC-HNO₃), H₂SO₄ (AC-H₂SO₄), NaOH (AC-NaOH), and KOH (AC-KOH) activated carbon electrodes, respectively. The AC-KOH electrode delivered the highest specific capacitance (about 4 times of the non-AC electrode) because of its good surface wettability, the largest specific surface area (1058.53 m² g^?1), and the highest total specific pore volume (0.474 cm³ g^?1). The AC-KOH electrode also had a great capacitance retention of almost 100% after 1000 GCD cycles. These results demonstrate that our AC developed from sugarcane bagasse has a strong potential to be used as high stability supercapacitor electrode material.

     

Influence of SCN− moiety on CH3NH3PbI3 perovskite film properties and the performance of carbon-based hole-transport-layer-free perovskite solar cells

Journal of Materials Science: Materials in Electronics - CH3NH3PbI3 perovskite films were prepared via a hot-casting method using six different CH3NH3I, PbI2 and Pb(SCN)2 solutions. Surface...